sludge pump Equipment in California

111 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Sludge Pump

by Enviro Safety Products     based in Visalia, CALIFORNIA (USA)

The Allegro Sludge Pump is excellent for pumping standing water containing sand, solids, leaves,or debris. This Allegro pump can pump at a maximum of 50 gallons per minute. Features double inside mechanical seals with silicon carbide faces and the most durable seal design available; a 403 stainless steel sleeve. The motor is continuously filled ...

Heger Pumps - Heavy Duty Dredging Pumps

by Heger Pumps Inc - Dragflow     based in Long Beach, CALIFORNIA (USA)

Dragflow offers complete system solutions. Submersible Agitator slurry pumps. Electric 5 to 300 HP. Hydraulic 24 to 400 HP. Fully self contained, self propelled dredges for use with all agitator slurry pumps. Dredges are built to fit into standard 20 or 40 foot containers for ease of transport.

Air Diaphragm Pumps

by BakerCorp     based in Shafter, CALIFORNIA (USA)

Ideal Usage: Sludge and slurries, flood control and dewatering situations associated with refineries. Applications where compressed air is available.

Discflo - Model API-610 - Pumps

by Discflo Corporation     based in Santee, CALIFORNIA (USA)

Discflo's API Pump has been employed in the following applications: produced water, hot oil recovery, heat exchange recirculation, diesel fuel, slop oil, float scum, oil sludge, and tank bottom transfer.

Periflo - Model FMP Series - Peristaltic Pump

by Romatec     Office in Bakersfield, CALIFORNIA (USA)

Applications: Transfer, Metering, Batching. Chemical : Polymers, Pigments, Inks, Detergents, Dyes, Sludges, Coatings, Slurries, Glues, Emulsions, Paints, Acids, Oils, Caustic, Latex, Lime. Food : Milk Products, Fruit Juices, Flavorings, Sauces, Jams, Wine, Vitamins, Feed Additives,

Periflo - Model AMP Series - Peristaltic Pump

by Romatec     Office in Bakersfield, CALIFORNIA (USA)

Applications: Transfer, Metering, Batching. Chemical: Polymers, Pigments, Inks, Detergents, Dyes, Sludges, Coatings, Slurries, Glues, Emulsions, Paints, Acids, Oils, Caustic,Latex, Lime. Food: Milk Products, Fruit Juices, Flavorings, Sauces, Jams, Wine, Vitamins, Feed Additives.

Griffin - Hydraulic Driven Submersible Pumps

by Griffin Dewatering     Office in Ontario, CALIFORNIA (USA)

Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4” to 24” with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to ...

THERMO-SYSTEM - Active Solar Sludge Dryer

by Entech Environmental and Industrial Equipment     based in Laguna Niguel, CALIFORNIA (USA)

Parkson’s THERMO-SYSTEMuses the sun as its main power source to generate 95% of the energy required for drying sludge.  The result is significantly reduced operating costs compared to competing technologies like conventional gas or oil fired dryers. The system’s sustainable, drying process is fully automated and is designed with ...

Muffin Monster - Model 10K Series - Compact and Efficient Grinder for Sewage and Sludge

by JWC Environmental     based in Santa Ana, CALIFORNIA (USA)

The 10K Series Muffin Monster is a compact grinder, tough on solids in sewage and sludge applications. It fits into areas with limited space requirements while still providing the necessary power for downstream protection, and overall, reducing maintenance costs, downtime and operator inconvenience. This efficient grinding solution can solve many ...

High Capacity Pump Lift Stations (HCPLS)

by Wastech Controls & Engineering, Inc.     based in Chatsworth, CALIFORNIA (USA)

Wastech's High Capacity Pump Lift Stations (HCPLS) are designed for transferring high volumes of water, chemicals and wastewater when a gravity drain is not possible. All HCPLS systems use thermoplastic vertical centrifugal pumps for corrosion resistance. Custom configurations and tank geometries are available, call or e-mail Sales.

Discflo - Submersible Pumps

by Discflo Corporation     based in Santee, CALIFORNIA (USA)

Discflo's submersible pumps are the perfect solution for viscous, abrasive and/or high-solids applications. They have been employed successfully in some of the toughest installations, including digester sludge, toxic slurries, nuclear waste, dewatering tank transfer, drilling, dredging, and environmental clean-up. In many cases, they are ...

Crisafulli Submersible Hydraulic Pumps

by SRS Crisafulli, Inc.     Distributor in CALIFORNIA (USA)

Crisafulli offers 53 standard models of its hydraulic submersible self-priming pumps in sizes from 2 inches to 10 inches, with flow capacities between 200 GPM and 3,800 GPM, Total Dynamic Heads (TDH) between 10 feet and 120 feet, and Solids Passing Capabilities to 3 inches. Custom models up to 24 inches and 18,000 GPM Flows are offered too.

Sludge Mate - Container Filter

by Flo Trend® Systems, Inc.     Distributor in Foothill Ranch, CALIFORNIA (USA)

The 'Sludge Mate' Container Filter is a simple one step process for dewatering a variety of sludges. The Sludge Mate Container Filter has no moving parts, requires minimal labor, has extremely low maintenance, and is very economical to use.

Sludge Heating Systems

by WesTech Engineering, Inc.     Distributor in CALIFORNIA (USA)

WesTech offers sludge heating solutions for nearly any anaerobic digestion application. From mesophilic to thermophilic, WesTech's versatility and experience ensure that our sludge heating equipment will provide years of dependable service. We can provide heat exchangers to be piped into existing hot water systems or a complete boiler/ heat ...

Discflo - Sump And Dry Pit Pumps

by Discflo Corporation     based in Santee, CALIFORNIA (USA)

Discflo manufactures a complete line of sump and dry pit pumps for heavy-duty sewage, sludge and slurry applications. Using the unique Discpac technology, these pumps provide clog-free, low cost, long-lived operation, outperforming progressive cavity, centrifugal, lobe and chopper pumps in even the toughest installations. Sump Disc Pumps have a ...

SKO - Horizontal Pump with Three Channel Impeller

by RUHRPUMPEN GmbH     Office in Orland, CALIFORNIA (USA)

The Ruhrpumpen Type SKO is a horizontal centrifugal pump with three-channel impeller for dry installation and universal use, suitable for pumping activated sludge as well as mixed, rain and raw water with upstream screen.

Envirocern - Geyser Pulse Pump

by Envirocern Inc.     based in San Francisco, CALIFORNIA (USA)

Geyser Pulse Pumps are a unique family of patented air lift pumps that can be used in a wide range of pumping, mixing and aeration configurations in water and wastewater applications. The design is very simple with no moving parts. Geyser Pulse Pumps are energy efficient  using only low pressure air as a driving force.. Geyser Pulse Pumps are ...

Phase Separators / Turbo Roll-Off Boxes

by BakerCorp     based in Shafter, CALIFORNIA (USA)

Separating and dewatering sludges, slurries and waste streams. Liquid drains through or can be pumped from the installed filter media panels and out of the container via discharge ports

Model JS 9310 - Struvite & Vivianite Prevention and Inhibition

by Jayne Products, Inc.     based in Carson, CALIFORNIA (USA)

Struvite prevention is a hot topic for discussion groups and seminars where the participants are plant managers and operators of wastewater treatment plants (WWTP) and Concentrated Animal Feeding Operations (CAFO). The outlet - outflow line of the anaerobic digester is often the first piece of equipment to get choked by a deposit of hard rock ...

FLO-VAC - Pump

by Flo Trend® Systems, Inc.     Distributor in Foothill Ranch, CALIFORNIA (USA)

Used in conjunction with a strainer, the Flo-Vac pump can vacuum transfer a variety of liquids/sludges. It is also useful in vacuum dewatering sludge in Flo Trend's line of Container Filters.

Need help finding the right suppliers?

Let the XPRTs do the work for you