We couldn't find any sludge reduction equipment suppliers or service providers located in Liberia

Here is a list of equipment results with suppliers serving Liberia

sludge reduction Equipment available in Liberia

  • Model ISAM - Sludge Reduction Systems

    Fluidyne is the first company to commercially design, build and operate SBR technology based on the activated sludge process with over 300 plants operating worldwide. Our intimate process knowledge in biological treatment has led to reducing solid content through biological means. The ISAM sludge reduction system from Fluidyne Can be used as a ...

    By Fluidyne Corporation based in Cedar Falls, IOWA (USA). from Sludge Reduction Systems Product line

  • Model FID - Sludge Reduction System

    Sludge Reduction system installed directly before the centrifuge. As a result of the reduction in fuel droplet size, centrifuges and filters will be able to more effectively remove in-organic contaminants and stay clean much longer. Consequently, sludge generation from centrifuges and filters will be reduced by approx. 50 to 80%. As a result, ...

    By IPCO Power B.V. based in Dordrecht, NETHERLANDS. from Fuel Treatment Product line

  • FreshAWL - Model WOW-Air S™ - Pond Sludge Reduction and Algae Control System

    Manufactured according to the EPA's standards for DfE, FreshAWL WOW-Air S works to penetrate the cellular walls of wastewater sludge that builds up in ponds and collection stations while controlling odor at the same time. This sludge penetration promotes the dewatering of the cellular contents and causes structural collapse. This product ...

    By FreshAWL, LLC based in Concord, CALIFORNIA (USA). from Wastewater Treatment Systems Product line

  • Premium

    ANDRITZ - Model EcoDry - Thermal Utilization of Sewage Sludge

    EcoDry is a simple, robust, and very efficient process for mono-incineration of sewage sludge, especially suitable for decentralized plants. Depending on the requirements of the customer, the EcoDry process can be implemented with one of the three well proven drying technologies available, namely drum drying (DDS), belt drying (BDS), and fluidized ...

  • Premium

    Intereco - Model TF Series - Bet Filter Press

    Four models with capacities from 30 to 85 mc/h of sludge. Municipal and industrial sludges volume reduction. Sludges prethickening before dehydratation with belt filter press. Continous sludges dehydratation with inlet dry solid from 0.5% to 1.5% t.s.s. Filtering belt washing with recycled water without consumption - no increase of Hydraulic load. ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Premium

    Intereco - Model Rotoset Series - Dynamic Thickeners

    The unit is complete with vertical cylindrical reactor with impeller for a perfect sludge/polyelectrolite mixing, with a centrifugal filter cloth washing water pump, able to recycle the thickener filtrate, this to avoid water consumption and the increasing of the WWTP hydraulic head. The drum is driven by a motor gear reducer to control rotation ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Premium

    Colsen - Thermophilic Sludge Digestion System

    The treatment of WWTP sludge represents a considerable cost for a sewage purification plant. In case the sludge amount is lowered the associated costs can be reduced. An efficient way for the reduction of the sludge amount is thermophilic sludge digestion. When compared with conventional mesophilic digestion thermophilic conditions take care of ...

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    WesTech - Model SPIRACONE™ - Upflow Sludge Blanket Clarifier

    Eliminate Moving Parts and Related Maintenance With the SPIRACONE Upflow Sludge Blanket Clarifier. The SPIRACONE Clarifier is an upflow sludge blanket clarifier that combines mixing, flocculation and sedimentation in a single basin. Raw water and chemicals are hydraulically mixed then pass upward through the various zones within the basin for ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Clarification Product line

  • Premium

    Model BDS - Belt Drying System for Sludge

    Flexible and low-grade energy use The patented ANDRITZ AG belt drying system (BDS) is characterized by its flexibility and ability to use a wide range of energy sources, particularly low-grade waste energy. BDS can be used for drying a broad range of products, such as industrial and municipal sludge, cow manure, biomass, as well as pre-treated ...

  • Reliant - Model Sewper Rx - Sludge Digester

    Sewper Rx is a polymicrobial blend of bacteria, enzymes, and nutrients, scientifically formulated for the biodegradation of organic compounds found in all types of wastewater systems. These bacteria have been subjected to a process known as ‘anhydrobiotic engineering’ which causes them to change their behavior, allowing them to adapt ...

    By Reliant Water Technologies based in New Orleans, LOUISIANA (USA). from Odor And Solids Reduction Bacteria Product line

  • Anaerobic Digestion & Solids Reduction

    Claro Big Bubble Gun Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior process ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

  • Model S-DISC - Disc Thickener

    The heart of the S-DISC sludge thickener is an inclined, slowly rotating filter disc that separates flocculated sludge from filtrate. A baffle plate distributes the inflow from the flocculation reactor evenly across the entire filter radius. Flexibly supported plows divide and move the sludge layer on the disc and open up furrows so that water can ...

    By Huber SE based in Berching, GERMANY. from Sludge Treatment- Sludge Thickening Product line

  • Model S-PRESS - Screw Press

    The Screw Press consists in a cylindrical wedge wire basket. A preceding flocculation reactor ensures a sludge flock quality that allows dewatering of the sludge flocks and stabilises the flocculated sludge. The free water drains through the basket whilst the solids inside the basket are conveyed gently upwards through the inclined basket by a ...

    By Huber SE based in Berching, GERMANY. from Sludge Treatment- Sludge Dewatering Product line

  • Model Q-PRESS - Screw Press

    The Q-PRESS is a screw press with a conical screw shaft and cylindrical sieves consisting of three treatment zones: inlet and drive zone, three-part thickening and dewatering zone, and press zone with pneumatic counter-pressure cone. In the first part of the thickening and dewatering zone the supernatant is quickly removed by the feed pump via a ...

    By Huber SE based in Berching, GERMANY. from Sludge Treatment- Sludge Dewatering Product line

  • Unison - Model GBT 400-S - Gravity Belt Thickener

    Gravity belt thickeners are primarily used for sludge volume reduction prior to digestion, dewatering or disposal. They are a continuously operating machine which thicken sludge by gravity on a revolving porous filter belt. They generally produce a pumpable thickened sludge. They are commonly installed in waste water treatment plants, water ...

    By Solids Technology International Ltd based in Wexford, IRELAND. from Sludge Thickening Product line

  • Unison - Model 100 - Gravity Belt Thickener

    Gravity belt thickeners are primarily used for sludge volume reduction prior to digestion, dewatering or disposal. They are a continuously operating machine which thicken sludge by gravity on a revolving porous filter belt. They generally produce a pumpable thickened sludge. They are commonly installed in waste water treatment plants, water ...

    By Solids Technology International Ltd based in Wexford, IRELAND. from Sludge Thickening Product line

  • UNISON - Model 400 GBT - Gravity Belt Thickener

    Gravity belt thickeners are primarily used for sludge volume reduction prior to digestion, dewatering or disposal. They are a continuously operating machine which thicken sludge by gravity on a revolving porous filter belt. They generally produce a pumpable thickened sludge. They are commonly installed in waste water treatment plants, water ...

    By Solids Technology International Ltd based in Wexford, IRELAND. from Sludge Thickening Product line

  • Premium

    CWT - Model UASB - Upflow Anaerobic Sludge Blanket Reactor

    The concept of the UASB reactor consists of a vessel in which the wastewater flows upward through an anaerobic sludge bed comprised of self-immobilized microbial communities.

    By Clean Water Technology, Inc. based in Los Angeles, CALIFORNIA (USA).

  • Lime-Stabilized Sludge Treatment Systems

    Claro designs and manufacturers reliable and cost-effective lime-sludge stabilization systems that deliver EPA Class A- or Class B-certified biosolids. Reduction of pathogens, odors, and the vector attraction potential of municipal and other sludges is achieved through a fully automated shaftless spiral conveyor system that enables thorough lime ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

  • Belt Thickener

    Canamidex sludge thickening system designed to reduce your sludge volume by up to 90%. It is ideal for thickening prior to processes such as digestion or dewatering, and for reducing sludge volume prior to storage or transportation.

    By Canamidex International Corp. based in Richmond Hill, ONTARIO (CANADA). from Canamidex Sludge Dewatering Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you