Sludge Removal Equipment Available In Zaire
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
Specially formulated for manure pits over slatted floors, outdoor manure lagoons and vertical holding tanks. MICROBE-LIFT/Sludge-Away is formulated specifically for the removal of organic bottom or surface solids that are slow to degrade. Provides rapid, natural sludge and muck removal and works 80% faster than competitive ...
-
PremiumManufactured by Weda ABbased in SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then ...
-
Manufactured by Envozyme Technologies Private Limitedbased in INDIA
The environment of pond changes rapidly in Intensive Aquaculture practices due to the accumulation of huge volumes of organic waste in the pond bottom. This waste in the bottom of ponds accumulates due to pollutants like dead plankton, faecal matter, and uneaten feeds frequently in culture ponds and forms Sludge. This sludge later ...
-
Controls Odor, BOD/COD’s, FOG’s, and Improves Soil. Using Micro Carbon Technology, BIO ENERGIZER reduces sludge, odor, BOD/COD, and FOG’s. It’s a scientific formulation of organic acids, buffers, natural biological systems, nutrients and energy systems which balance the natural microbial ecosystem to increase ...
-
Manufactured by Gerotto Federico srlbased in ITALY
The patent pending robot with an on-board screw pump was developed to remove sludge by means of an 80 [mm] / 3″ diameter pipe without the need of a suction excavator or industrial vacuum ...
-
Manufactured by Konsebbased in SWEDEN
Sludge is usually sediment in square or round basins and is lifted by a pump. Since the area of the basin used to be several square meters, the sludge must be moved to the pump. Often it is done by different scrapes. Scrapes are usually big machines, which are expensive in purchasing and need lot of energy. When troubles occur usually the ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Settled sludge, as well as clearwater, must be continuously removed from the clarifier tank. For sludge removal, different systems are available — sludge agitators in combination with an inclined tank bottom, flushing mechanisms, and rotary or chain scraper systems. Depending on the ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Enviroquip rapid sludge removal clarifier is unlike any other clarifier. Sludge is drawn from the floor using straight tubes, going directly into SludgeViewr troughs, which display the amount of sludge return from each tube. Furthermore, Ovivo's ScumTrappR influent well captures 95% of the floatables, eliminating the need for ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
While optimum angle is approximately 30° at a tip speed of 3m per minute, the Hydroflux Epco LogMax® has an effective logarithmic angle range of between 15° and 45° and can travel at tip speeds up to 10m per minute. The LogMax hinge system allows each blade to be adjusted individually during installation for peak plow performance and reduced tank floor ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
HiFlowTM can be provided with a single or multiple sludge removal hoppers. In larger systems the use of multiple hoppers results in a reduced tank height and hence a cost benefit. The hoppers can be fitted with mixers to provide effective and reliable sludge removal. This ensures that no dead zones develop and is ideally suited ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
The VeeMax Chevron pattern sludge plow is designed for heavy, relatively viscous, sludges such as those in water treatment where flocculants are added or lime is settled. The VeeMax Chevron pattern, available in duplex or simplex configuration, plows furrows of sludge progressively toward the sludge hopper at an average tip ...
-
Manufactured by KMT International, Inc.based in USA
MegaMACS is an in situ solution, allowing for the processes of tank cleaning and waste processing to be done by one machine. The MegaMacs system is a mobile, energy independent solution that is easily adaptable for local conditions and variety of projects related to cleaning tanks, pits, etc. The system is modular and can meet any customer's ...
-
Manufactured by Probiosphere Inc.based in CANADA
ARKEANS® is a trade mark of Probiosphere Inc. Canada. Arkeans® is the result of a long time R&D development product for the purpose of sludge digestion and biogas production. The result is a careful selection of Archaea bacterias and other beneficial microbes that live in symbiosis to fully biodegrade tougher organic ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
Dissolved air flotation is very widely used in treating the industrial wastewater effluents from oil refineries, petrochemical and chemical plants, natural gas processing plants, paper mills, general water treatment and similar industrial facilities. YMRF series DAF is specialized used to remove industrial and municipal sewage ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
into water at certain working pressure. In the process, pressurized water is saturated with dissolved air and is discharged into a flotation vessel. The microscopic air bubbles produced by released air attach to suspended solids and float them to the surface, forming a sludge blanket. A scoop removes the thickened sludge. Finally, it complete ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Designed to be installed in many circular clarifier tanks with flat or slightly sloping bases. Generally used for the treatment of urban or industrial wastewater containing solids that settle quickly and where it is important to be able to remove the sludge as it ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
Hydroman® Submersible Sludge Pumps to Remove Siltation is a better way in water treatment plants, water treatment plants extracting fresh water from a nearby river to clarifier almost always entails pumping in a significant amount of sand and silt, so need to use a submersible sludge pumps with agitator to pump sand and silt. E: ...
-
Manufactured by Trucentbased in USA
Paint sludge dewatering, filtration and removal systems have become essential due to the vast amount of manufactured goods that are painted. Today, paint sludge dewatering, filtration and removal systems can be custom engineered to fit into your specific water wash paint booth line. Dewatering, filtering and ...
-
Manufactured by Atlas Filtri S.r.l.based in ITALY
The fdm-1p magnetic sludge filters are the ideal solution to resolve system issues due to particle contamination (especially rust and sand) that form through corrosion and build-ups during normal thermal system ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
Enhances biological performance and promotes bio-solids reduction. MICROBE-LIFT/Sludge-Away is formulated specifically for the removal of organic bottom or surface solids that are slow to degrade. Provides rapid, natural sludge and muck removal and works 80% faster than competitive products. Binds phosphate and helps with the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you