Only show results available in Virginia? Ok

sludge shaftless conveyor equipment

  • Premium

    ASTIM - Shaftless Spiral Conveyors

    Shaftless Screw or Spiral Conveyor is an alternative concept to the traditional shafted screw conveyor. Material is conveyed by an extra-heavy-duty shaftless screw that slides on a low-friction, wear-resistant liner inside the conveyor trough housing. Shaftless spiral conveyors are successfully used to transport jamming, bridge forming and sticky ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Shaftless Spiral Conveyors Product line

  • Premium

    Mellegard & Naij - Model CO - Spiral Conveyor

    Robust construction capable of long conveying & heavy operation. Thick high strength spiral. Thick quality stainless steel trough. Thick easy replaceable wear surfaces in alternative materials. Module system for easy adaptation of inlet, outlet, supports, drainage, drive unit etc. Available with drainage sections and dewatering/compaction zone ...

    By Hydria Water AB based in Borås, SWEDEN. from Spiral Conveyor Product line

  • Premium

    ANDRITZ - Partial Sludge Drying

    Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being incinirated, ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Partial Sludge Drying Product line

  • Vulcan - Model TF - Shaftless Screw Conveyor

    The Model TF Shaftless Screw Conveyor is utilized for the transport of screenings, grit or sludge in municipal and industrial wastewater treatment applications.

    By Vulcan Industries based in Missouri Valey, IOWA (USA). from Shaftless Screw Conveyor Product line

  • SKE Spiraline - Model SCO - Shaftless Screw Conveyor

    SKE Spiraline Screw Conveyors are designed for transportation of difficult solid materials.The materials may be stringy, sticky, varying in size, volume or dryness. This included sludge, screenings, wastes, grit, wood chip, animal products, foodstuff, and drill cuttings can all be conveyed successfully. Flow rates of up to 45m3/h can be achieved ...

    By SKE Solutions based in Co Tyrone, UNITED KINGDOM. from Shaftless Screw Conveyor Product line

  • Model KD 02 - Shaftless Screw Conveyor

    Shaftless screw conveyors model KD 02 are available in four sizes with capacities from 5 to 20 m3 per hour. The conveyors are especially suited for products with a tendency towards tackiness and bridgebuilding e.g. sludge, damp sand and materials with heterogeneous grain sizes.

    By Danish Wastewater Equipment A/S (DWE) based in Vejle, DENMARK. from Shaftless Screw Conveyor Product line

  • Shaftless Screw Conveyors

    The shaftless screw conveyor is the ideal solution to convey and meter the sludge or bulk materials coming out of centrifuges, presses and mixers. The shaftless design gives the opportunity to convey sticky and sluggish material without the risks associated with material building around the shaft. It also enables a filling rate of up to 100%, ...

    By Atara Equipment Ltd based in Laval, QUEBEC (CANADA).

  • Shaftless Vertical Conveyors

    Shaftless Screw Conveyors are ideal for vertical conveying. Since they do not require a non-drive end bearing this eliminates the need for high maintenance bottom shafts and seals on a pulling shaftless vertical conveyor.   A shaftless vertical feed is obtained by directly connected pushing shaftless conveyor which optimizes layout ...

    By Custom Conveyor Corporation (CCC) based in Rogers, MINNESOTA (USA). from Shaftless Vertical Conveyors Product line

  • MEVA - Shaftless Screw Conveyors

    MEVA shaftless screw conveyors are used for dust and odor free transport of numerous materials such as dewatered sludge, pulp, wood chips, sawdust, chemicals, slaughter-house refuse, garbage, scrap metal, pellet fuel etc. Because the spirals are shaftless, the conveyors are particularly suited for transporting materials which tend to jam, material ...

    By VoR Environmental based in Botany, AUSTRALIA. from Shaftless Screw Conveyors Product line

  • Shaftless Screw Conveyor

    The JDV Shaftless Screw Conveyor is a proven design to reliably transport solids with a lower total cost of ownership when compared to other transport methods. The Shaftless screw conveyor flight design allows for a greater fill rate versus other methods/equipment, increasing operational efficiencies and lower initial capital investment. Long life ...

    By JDV Equipment Corporation based in Dover, NEW JERSEY (USA). from Shaftless Screw Conveyor Product line

  • Shaftless Screw Conveyors

    High quality, shaftless screw conveyor products from Klinkenberg Zaanstad. Made with wear-resistant materials of your choice (including heavy duty versions) and in various diameters. Can be used in numerous situations (sludge transport/waste streams) with an extensive capacity. The term ‘low maintenance’ also applies to our shaftless ...

    By Klinkenberg B.V. based in Krommenie, NETHERLANDS. from Shaftless Screw Conveyors Product line

  • Shaftless Screw Conveyors

    Shaftless spiral conveyors eliminate the central shaft and allow a much higher fill rate resulting in lower rpm’s, more efficient conveying and consequently less wear. Without a shaft, no intermediate or end bearings are required. The trough liner is the spiral’s replaceable bearing surface. The only machined bearings in a shaftless ...

    By Custom Conveyor Corporation (CCC) based in Rogers, MINNESOTA (USA). from Shaftless Screw Conveyors Product line

  • Screw Conveyors

    Transportation of screenings, sludges, waste and other solids by means of a shaftless spiral.

    By REKO Industrial Equipment b.v. based in Stellendam, NETHERLANDS.

  • RATAJ - Model RL, RNL & RLP - Robust Shaftless Spiral Conveyors

    New opportunities are opening up for the use of RATAJ RL and RLN robust shaftless spiral conveyors for more demanding application in heavy industry or for high performance requirements (from 0.01 to 600 m3 per hour). Robust conveyors can easily tackle the transfer of abrasive materials (ground corundum, grit, sand, crushed stone, abrasion dust, ...

    By RATAJ a.s. based in Ceske Budejovice, CZECH REPUBLIC. from Robust Shaftless Spiral Conveyors Product line

  • Model SDK & SDK-B - Sludge Screw Conveyors

    Sludge screw conveyor is designed for transport of sludge and substances of a similar nature. SDK is most often used in waste water treatment plants when removing sludge after machine dewatering on filter presses and centrifugal separators. Dewatered sludge is transported by conveyor screws to a dump, trailer or container.

    By Fontana R, s.r.o. based in Brno, CZECH REPUBLIC. from Sludge Screw Conveyors Product line

  • Model Type RL(N) - Robust, Shaftless Screw Conveyors

    The robust giants are rigid, shaftless spiral conveyors. Their main application include transport of large volumes (up to approx. 600 m³/h – e.g. recycling material) and conveying of bulky goods.

    By Wildfellner GmbH Optimale Fördertechnik based in Buchkirchen, AUSTRIA. from Robust, Shaftless Screw Conveyors Product line

  • Shaftless Spiral Screw

    We supply all industry standards of shaftless spirals as well as made to order screws that can be used for your new projects, or as replacement parts for existing shaftless screw conveyors, sludge conveyors, screw feeders, screw presses, inclined shaftless screw conveyors, vertical shaftless screw conveyors or any other equipment using ...

    By S2S Industries based in Laval, QUEBEC (CANADA).

  • DEWA - Spiral/Belt Shaftless Conveyors Systems

    DEWA provides both spiral shaftless conveyors as well as belt conveyors depending on customer requirements.

    By Dewaco Ltd based in LAITILA, FINLAND. from Spiral/Belt Shaftless Conveyors Systems Product line

  • USSSC Shaftless Screw (Spiral) Conveyors

    The SSC shaftless screw conveyor is an alternative concept to the traditional shafted screw conveyor. Shaftless screws are available from 6¿ to 24¿ diameters in single flight and 9¿ to 24¿ diameter in double flight configurations. Material is conveyed by an extra-heavy-duty shaftless screw that slides on a ...

    By WAMGROUP S.p.A. based in Ponte Motta/Cavezzo (MO), ITALY.

  • Shaftless Spirals & Liners

    Claro shaftless spiral screws and trough liners are backed by over 25 years of research and applications experience. Whether for a new system or for a spare parts retrofit, Claro provides spiral configurations that maximize conveyor system performance and spiral life. Let us improve the performance of your current shaftless or shafted auger ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Shaftless Spirals & Liners Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you