Sludge Storage Tank Equipment In Europe
-
Manufactured by Bio-Dynamics NVbased in BELGIUM
A manure storage tank of 35300 cubic foots (1 million liter) is built in a week, from the floor to the top of the wall. HSR (high sulfate resistance) quality cement is use.The construction complies with the strict VERITAS- regulations and standards. Manure treatment facilities are built in a practical and simple way at a height of 4, 5 and ...
-
Manufactured by Skyhawk Global Ltdbased in UNITED KINGDOM
TankEater is a bioremediation product that was designed specifically to break down hydrocarbon sludge in Storage Tanks, Vessels and Separator pits. TankEater not only breaks down the hydrocarbon sludge but activates the natural bacteria in the specific area to accelerate the sludge reduction process, returning ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
Manufactured by Biogest International GmbHbased in GERMANY
Our BSK-decanters also can be used as sludge water discharge systems, to simply remove the turbid water which results from static sludge thickening in sludge storage tanks. ...
-
Manufactured by Biogest International GmbHbased in GERMANY
;Mixing” (denitrification). High speed for “Aeration” (nitrification). Outstanding high service life of the gear-box bearings (> 150,000 h)..Perfect installation for buffer tanks and sludge storage tanks (mixing and homogenisation). No submerged wear ...
-
Manufactured by Fuchs Enprotec GmbH - a subsidiary of the METAWATER Groupbased in GERMANY
The directly driven FUCHS submersible TURBOSTAR Mixer TS-SUB is applied in storm water tanks, where it swirls up settled solids. In equalization basins, activated sludge basins and small sludge storage tanks it provides for proper mixing and circulation. The high-performance machine is simply designed and very ...
-
Manufactured by FluidMixbased in SPAIN
of storm tanks, sludge storage tanks, holding tanks in agriculture and biological processes. The installation can be done by using a lifting pipe system guide. Low speed (AF) submersible mixers are used in sewage treatment plants for the suspension of solids and/or flow generation. In tanks of ...
-
Manufactured by Hidrostal Holding AGbased in SWITZERLAND
HidroMix, the original solution for tank mixing systems. The Original Solution for Tank Mixing Systems. HidroMix pump mixing system for sludge tanks and digesters, provides a more efficient, safe and economic is a practical alternative to conventional submersible and gas mixers. The key objective with any form of ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
he XTA and XTAK are self-aspirating submersible aerators for wastewater and water treatment in municipal and industrial plants. Main areas of application are mixing and equalization tanks, activated sludge tanks, SBR, and sludge storage tanks at water depths from 2 to 9 m (7–30 ...
-
Manufactured by Butler Manufacturing Services Ltd. (BMS)based in IRELAND
tank * Integral aeration tank * Integral sludge storage tank * Above or below ground installation * Permanent or temporary operation * Instant installation * Same day commissioning The BMS Recyclone is available in two operating capacities of 2000/4000L's per hour. The minimal civil works combined with the ease ...
-
Manufactured by SiGa-Tech Sp. z o.obased in POLAND
Unique, patented Hexa-Cover system can be used for covering water storage tanks, sludge tanks, lagoons or other process ...
-
Manufactured by Caprari S.p.A.based in ITALY
Horizontal submersible mixers with direct drive. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Available with cast-iron construction and stainless steel propeller or in a completely stainless steel version - AISI 316. Galvanic separation system for standard ...
-
Manufactured by CUSS Chriwa Umwelt-Systemtechnik und Service GmbHbased in GERMANY
of this waste stream, dewatering takes place before disposal. The water removed during dewatering can be reintroduced into the plant. To optimise dewatering, flocculant is added to the wet sludge. Depending on the process, intermediate storage in a sludge tank is necessary. To prevent digestion processes and the associated ...
-
Manufactured by Gerotto Federico srlbased in ITALY
Compact mini robot for operation in Atex Zone 0. Thanks to the possibility of entering a 500 [mm] manhole, it is ideal for pipelines and ...
-
Manufactured by Non Entry Systems Ltd (NESL)based in UNITED KINGDOM
The NESL Tanksweep system is designed for the de-sludging of petroleum & chemical storage tank by the control and circulation of high velocity liquid streams through directable nozzles fitted to the tank shell. Depending on the size of the tank and the product stored up to four sets of tank ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-HBM and ATB-MBM mixers generate a horizontal circular flow and thus ensure mixing through the ...
-
Manufactured by ADROC Tech Ltd.based in SLOVAKIA
Equipment Set for the Remotely-Controlled Removal of Sludge from Oil Tanks. The ESOT is a Proven Technology. Firstly deployed in March 2016, ESOT has since been confirmed by satisfied customers and cleaned a large number of oil tanks. ESOT- Improves safety and significantly accelerate your oil storage tank ...
-
Manufactured by ETG S.r.lbased in ITALY
The instrument uses radar technology to measure the hydrometric level of the waterway, taking a measurement of the distance of the water surface from the sensor case and then subtracting the value found from the hydrometric zero value. ...
-
Manufactured by Permastore Limitedbased in UNITED KINGDOM
TRIFUSION has rightfully become the standard by which all other finishes are assessed. This proven high quality contact surface finish sets the benchmark for use in the more demanding areas of industrial effluent treatment and sludge digestion. An additional protective layer, together with the zero discontinuity finish tested at an exacting ...
-
Manufactured by Siltbuster Limitedbased in UNITED KINGDOM
Our mix tanks are available in a range of different sizes to provide the necessary contact and reaction time required for your desired treatable flowrate and contamination. All tanks incorporate integral baffles that can be changed in position to suit the treatment philosophy with the mixing of chemicals controlled via top mounted variable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you