Sludge Thickener Equipment Available In Australasia
-
Manufactured by Salherbased in SPAIN
Salher sludge thickeners are manufactured in GFRP (glass fiber reinforced polyester) with orthophthalic resins and are used for the dehydration or thickening of sludge produced during primary and secondary treatments. They are truncated cone-shaped equipment consisting of a central feeding chamber and a Thompson perimeter canal. ...
-
Manufactured by Tuke & Bell Ltdbased in UNITED KINGDOM
The Tuke & Bell Sludge Thickener consist of an access bridge with an open-mesh walkway which spans across the diameter of the tank, mounted in a fixed position onto concrete structure or separate portal frames if a glass coated steel tank is to be used. A centrally mounted drive unit supports a full length torque tube with a lower ...
-
Manufactured by Centrisys/CNPbased in USA
The Centrisys Sludge Thickener (THK Series) is specifically engineered to achieve high-performance thickening of biosolids. The non-conical design results in greater G-volume, allowing for the highest capacity of flow to the centrifuge. The THK improves upon existing technologies using fundamental principles of a 1) Centrifuge - 3,000 Gs, ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
There are over 1000 HUBER thickeners installed worldwide including many in Australia. The rotary screw thickener is designed for thickening of waste activated sludge prior to dewatering or stabilisation at larger STP’s. Good sludge thickening is required as a prerequisite for the efficient ...
-
Manufactured by Andrew Brown & Co Pty Ltd - ABCO Water Systemsbased in AUSTRALIA
Abco Water Systems are industry leaders in the design, manufacture, installation, and commissioning of all?water and?wastewater?related products required for all industries. ...
-
Manufactured by ENVITES, spol. s r.o.based in CZECH REPUBLIC
Production and installation of sludge thickeners. Our product range consists of sludge thickeners, which are used to effectively reduce the volume of the sludge pumped into the dewatering device (filter press). The main advantages of ENVITES sludge thickeners include high ...
-
Manufactured by Shanghai Jorsun Environmental Engineering Co., Ltdbased in CHINA
Center drive sludge thickener is applied for small and medium sized clarifier with central inlet,surrounding outlet and central sludge discharge.It is mainly used for sludge discharge of clarifiers especially for industrial wastewater and urban sewage treatment ...
-
Manufactured by Ekofinn Energie- & Wassertechnik GmbHbased in GERMANY
EKOFINN utilizes SCRUDRAIN Sludge Thickeners for municipal and industrial waste water treatment plants to increase the capacities and achieve better dewatering results with MONOBELTBelt Filter Presses. The prethickener increases the dry substance content (DS) – depending on type of sludge – from 1 % up to 5 to 8 ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo sludge thickener is designed to continuously produce as thick a sludge as possible from streams of sludge previously formed and collected in separate settling basins. Included with the thickener mechanism are Ovivo's durable heavy-duty drives. The drive is designed to handle the specified torque for 20 ...
-
Manufactured by Hoffland Environmental, Inc. (HEI)based in USA
The HEI Sludge Thickener is an efficient method to gravity concentrate and decant waste sludge. Liquid sludge pumped from a clarifier will have a solids content of 0.5% from cone bottom clarifiers to 2%-4% from the rake bottom clarifiers. The sludge thickener must have sufficient capacity to ...
-
Manufactured by InnovaSea Systems, Inc.based in USA
The Hydrotech belt filter is designed to thicken sludge when used in conjunction with a polymer mixing system. Typically, sludge from a Hydrotech drum or disc filter has a dry matter content of 0.030-0.050% (300-500 mg/litre). After passing through the Hydrotech Belt Filter System, the dry matter content increases to 8-12%. This means the ...
-
Manufactured by Picatech Huber AGbased in SWITZERLAND
All HUBER thickening systems guarantee an adjustable final solids content and meet the highest separation requirements. With regard to the economical further treatment and disposal of sewage sludge, it is necessary to reduce the sludge volumes produced within the course of the wastewater treatment process. This volume reduction is ...
-
Manufactured by Shanghai Techase Environment Protection Co., Ltdbased in CHINA
to 100,000 mg/l. It replaces the sludge thickening pool which causes stinky smell and phosphorous and reduces the capital construction cost and land ...
-
Manufactured by Konsebbased in SWEDEN
The DAB system for sludge dewatering is based on a simple and effective design which lowers the overall cost of sludge utilization. ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
With more than 30 years of experience in the development and manufacturing of drum thickeners, ANDRITZ SEPARATION has acquired unmatched expertise in this technology. The PowerDrum (PDR) is considered to be an easy and efficient sludge thickening solution prior to the dewatering process and can deal with biological sludge ...
-
Manufactured by Teko Ltd.based in CROATIA
Application: Unit is used for the purposes of sludge thickening and dewatering in either municipal waste water treatment plants, or in industrial plants. Due to the specific construction, sludge thickening and dewatering unit can treat sludge directly from the biological tanks or from secondary settling tanks (DS ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
INNOGRID is a range of continuous belt thickeners designed to increase the solid content of municipal and industrial sludge. INNOGRID efficiently treats sludge from 2 to 20g/l with capacities up to 120m3/h. The sludge outlet dryness is between 5 to ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for continuous mechanical thickening of municipal or industrial sludge. Continuous thickening. Belt width: from 1 to 3 m. Filtration length: 3 m. Sludge flowrate: up to 80 m3/h. Very clean operation. Easy maintenance and supervision. Low energy consumption and operating costs. Material: stainless steel 304L, 316L or ...
-
Manufactured by Benenv - Jiangsu Benenv Environmental Protection Co., Ltdbased in CHINA
The Wave Separator is a solid-liquid separation equipment, with thickening and dewatering functions. It is a self-cleaning machine, due to the continuous synchronized rotation of special oval discs between the slits. The Wave Separator is a patent product, making it a universal machine used in various applications & industries. Its design ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for continuous mechanical thickening of municipal or industrial sludge. Continuous thickening. Belt width : from 1 to 3 m. Filtration length : 4m. Sludge flowrate: up to 100 m3/h. Very clean operation. Easy maintenance and supervision. Low energy consumption and operating costs. Material : stainless steel 304L, 316L or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you