We couldn't find any slurry pump equipment suppliers or service providers located in Hawaii

Here is a list of equipment results with suppliers serving Hawaii

slurry pump equipment available in Hawaii

  • Premium

    Piranha - Agitator Slurry Pumps

    Agitator Slurry pumps deliver kinetic energy (energy of motion) to solids surrounding the pump intake, re-suspending them into a fluid state which would have otherwise buried and starved the pump of liquid. The solids are pulled into the pump and pushed on through the discharge keeping the intake clear and free of slurry accumulation. A pump ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Agitator Slurry Pumps Product line

  • Premium

    Piranha - Model 1.5, 3, and 4 Inch - Slurry/Trash Pumps

    1.5, 3, and 4 inch Slurry/Trash Pumps. Designed for removal of sediment, water, dust abatement, or fire protection. Our Slurry/Trash Pumps are designed with the highest quality components to withstand abrasion and shock. Portable engine driven trash pumps, 3 inch and 4 inch, unleaded gasoline.

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Slurry/Trash Pumps Product line

  • Premium

    Draygon MudHen - Model 2.0 - Concrete Slurry

    The 2.0 has twice the capacity of the 1.0 between cleanings and allows for more clean water production. The system can be designed with the portable sludge slab cart – or you can use a wheel barrel or other container for removing the sludge slabs. Dimensions 33” wide, 64” long, 48” high. Equipped with an air operated pump ...

    By Draygon LLC based in Venice, FLORIDA (USA). from Concrete Slurry Product line

  • Premium

    Draygon - Model MudHen 1.0 - Concrete Slurry

    The MudHen 1.0 is the most effective portable slurry water recycling system made. It can fit in an elevator, through a standard 36” door, and on a tommy gate lift. Over 200 gallons per hour of slurry water can be treated – cleaning takes less than 3 minutes. Filter slabs are easily disposed of. The MudHen 1.0 dimensions: 33” ...

    By Draygon LLC based in Venice, FLORIDA (USA). from Concrete Slurry Product line

  • Premium

    ENEXIO - Dense Slurry Mixer

    Hydrodynamic mixers for superb slurry quality; The core component of the Circumix Dense Slurry technology is the Circumix Mixer. The role of the Circumix Dense Slurry mixer is to receive the fly ash, mix it with the necessary make-up water to produce homogenous dense slurry with 0.8:1…1.2:1 water-to-solid ratio on weight basis to be ...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Dense Slurry Mixer Product line

  • Premium

    Komline Sanderson - Plunger Pumps

    K-S Plunger Pumps are engineered for heavy duty service in difficult sludge, slurry, float transfer, or metering applications. It is a self-priming positive displacement pump that can pass solid objects up to 1-5/8' in diameter, rags, or entrained air. Our pumps have capacities to 34 liters per second (540 gpm) at heads to 90 meters (300 feet). ...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA).

  • Premium

    Piranha - Solids Handling Pump

    Piranha solids handling pump line is comprised of models ranging from 1 to 30 horsepower. They are designed for pumping slurry & debris laden water in sump & lagoon applications including: industrial, sewage, wastewater, animal & vegetable waste, paper pulp and construction de-watering applications where excessive solids prohibit the ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Solids Handling Pump Product line

  • Premium

    Piranha - Industrial Dredge

    Our Piranha industrial dredges feature powerful agitator slurry pumps that are so effective, they excavate material faster than other styles of dredges many times their size. Other manufacturer’s dredges skim materials off the top of your sediment layer, pumping excessive amounts of water with low solids content. Piranha dredges excavate ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Industrial Dredge Product line

  • Model 3/8 Inch - Drum Pump

    Reliable polypropylene air center section combined with non-metallic clamped casing materials ensure maximum chemical compatibility. Our patented Max-Pass valve system allows operation under a variety of conditions, ranging from clean fluids to slurries, to solids applications.

    By Delta Rigging & Tools, Inc. based in Pearland, TEXAS (USA). from Drum Pump Product line

  • Model PSD Series - Air Operated Double Diaphragm Pumps

    White Knight PSD Series air-operated double-diaphragm (AODD) pumps, feature PTFE or UHMW (PE) corrosion-resistant fluid paths, which make the pumps ideal for corrosive or toxic liquids such as acids, fuels, glues, paints, resins, inks, or wastewater, as well as more viscous fluids and slurry.

    By White Knight Fluid Handling based in Kamas, UTAH (USA). from Air Operated Double Diaphragm Pumps Product line

  • Water, Stormwater, and Waste Water Pumps

    Barnes (Sewage, sump, effluent and trash handling pumps. Submersible grinder, cutter and wastewater non-clog pumps). Cornell (Clean water and sewage — vertical, horizontal, close coupled or extended shaft high efficiency pumps. Immersible motors, submersible and dry pit pumps). Crown (Self priming pumps, split case pumps, end suction pumps, single ...

    By Weston & Sampson Engineers, Inc. based in Peabody, MASSACHUSETTS (USA). from Water, Stormwater, and Waste Water Pumps Product line

  • IPP

    The IPP pump is a process pump designed to meet and exceed the ANSI B73.1 M specification. These versatile pumps efficiently handle a wide range of corrosive and non-corrosive liquids ranging from water to hydrocarbons to slurries. You can apply them with complete confidence.

    By RUHRPUMPEN GmbH based in Witten, GERMANY. from IPP Product line

  • Mining

    The Maric flow control valve is designed to deliver a fixed constant (maximum) flow of water, irrespective of pressure differential across it, (within a given pressure differential range). In the case of slurry pumps, this means, the Maric flow control valve will maintain a constant flow of glandwater, irrespective of fluctuating gland-water ...

    By Maric Flow Control Australia based in Magil, AUSTRALIA. from Mining Product line

  • Tsurumi - Model GSZ Series - Three Phase Dewatering Pump

    Utilizing 4 pole, 1800 rpm motors and 6 pole, 1200 rpm motors the GSZ Series offers longer wear life on parts due to the slower impeller tip speed. GSZ pumps are the most formidable high volume slurry/dewatering pumps offered today.

    By Tsurumi Pumps based in Glendale Heights, ILLINOIS (USA). from Three Phase Dewatering Pump Product line

  • Model DMP 3 - Double Diaphragm Pump Metallic

    Paint, latex, ceramic slip, slurries, polymers, tank car fill and empty, etc.

    By Lutz Pumpen GmbH based in Wertheim, GERMANY. from Double Diaphragm Pump Metallic Product line

  • Lugger Container Filter

    The Lugger Style Container Filter is an economical, one-step method in separating and dewatering sludges and slurries. The material can be pumped or conveyed into the container filter for liquid /solid separation.

    By Flo Trend - a Wassar Logistics Holdings, LLC based in Houston, TEXAS (USA). from Lugger Container Filter Product line

  • Roll-Off Container Filter

    The Roll-Off Style Container Filter is a patented, economical, one-step method for separating and dewatering sludges, slurries and waste streams. The material can be pumped or conveyed by other means into the roll-off container filter for liquid / solid separation. Liquid drains through the installed filter media panels and out of the container ...

    By Flo Trend - a Wassar Logistics Holdings, LLC based in Houston, TEXAS (USA). from Roll-Off Container Filter Product line

  • Model D2CX20-21 - Submersible Grinder Pumps

    The reliable D2CX20-21 2 HP submersible centrifugal grinder pump offering by Delta Environmental Products is especially designed for use in low pressure sewer systems with long discharge runs or high static heads. The D2CX20-21 grinder performance features flows up to 45 GPM and heads to 107' TDH and features an innovative hardened cutter ...

    By Delta Environmental Products - Pentair, Inc. based in Denham Springs,, LOUISIANA (USA). from Submersible Grinder Pumps Product line

  • TurfMaker - Model 325 - Hydroseeder Machine

    The TurfMaker  Model 325 hydroseeder, with mechanical agitation, is a cost effective alternative to jet agitation machines. Typically, jet agitation hydroseeders are limited to soupy slurries of paper mulch. Soupy paper mulch applications washout easily with rain and frequently yields spotty seed germination. Poor grass growing results make ...

    By TurfMaker Corporation based in Rowlett, TEXAS (USA). from Hydroseeder Machine Product line

  • EBARA - Model EFQU, EFQT - Self Priming Trash Pump

    EBARA EFQ series pumps are available in a wide range of materials and sizes to handle solids and light slurries efficiently and effectively. The EFQ trash pump features a large volute that allows for quick priming even with the casing only partially filled and an open suction line. Easy to install in various mounting configurations including ...

    By EBARA International Corporation based in Rock Hill, SOUTH CAROLINA (USA). from Self Priming Trash Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you