slurry pump equipment in Finland

  • Rekitec - Model GP55 - Slurry Pump

    The most economical solution for pumping slurry from deep pits. The shaft is 1050 gear steel and the body is strong cast iron. The impeller has optimised pumping power and long life. The safety system prevents leakages or overheating.

    By Rekitec Oy based in Haapajärvi, FINLAND. from Slurry Pump Product line

  • Metso - Extra Heavy Duty Hard Metal Slurry Pumps XM

    XM hard metal, extra heavy duty large size slurry pumps are designed for the most arduos pumping applications. The rugged wet end is designed with extra thick metal sections at known points of wear and the high aspect ratio impeller ensures excellent performance with long life. Flowrates to 10 000 m3/hr - 44 000 usgpm. Heads up to 75 m - 250 ft.

    By Metso Corporation based in Helsinki, FINLAND.

  • Agronic - Model MRP 100 - Feed Pump

    Agronic MRP 100 is an electric shredding slurry feed pump. The pump shreds and feeds even slurry with high hay content e.g. from a pit to the slurry basin. The pump operates completely independently through an automated control. The pump produces sufficient pressure to transfer slurry even over long distances.

    By Agronic Oy based in Haapavesi, FINLAND. from Feed Pump Product line

  • Model LPP-T - Slurry Transfer Hose Pumps

    Flowrox LPP-T pumps incorporate advanced single roller design which eliminates friction and lowers energy consumption. They are ideal for pumping various slurries and dosing a wide range of abrasive, corrosive, viscous or crystallizing media.

    By Flowrox Oy based in Lappeenranta, FINLAND. from Slurry Transfer Hose Pumps Product line

  • Livakka - Light 1-Axle Slurry Wagon

    Tank sizes are 10 and 12 m3. Axle is non-turning, equipped with brakes and flange-mounted to the frame. Standard tyre size is850/50R30.5. Excellent choice for a surface spreader or water wagon. Available as an optional accessory, the Easy Control hydraulics control package also allows for the mounting of a pump crane and disc injector.

    By PEL-Tuote Oy based in Rantasalmi, FINLAND. from Light 1-Axle Slurry Wagon Product line

  • Lamor - Model C 75 H - Oil Transfer Pump

    The unique design of the hydraulic oil transfer pump C 75 H is ideal for multiple oil recovery applications for light and heavy viscous oils, petroleum industry products, slurries and dirty water. The C 75 pump can be utilized with a wide variety of oil recovery equipment and skimmers.

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Oil Transfer Pump Product line

  • Model C - series - Progressive Cavity Pumps

    The Flowrox progressive cavity (PC) pumps' C-series is designed for the most demanding industrial slurry and paste pumping applications. Due to its unique features and patented design, high efficiency and high pressure are achieved with a short construction. It is easy to install and requires less energy and maintenance resulting in very low Total ...

    By Flowrox Oy based in Lappeenranta, FINLAND. from Progressive Cavity Pumps Product line

  • Hydraulic Submersible Pumps

    The Agronic hydraulic drive submersible pump series contains three pumps of different sizes for various uses. The pumps can handle impurities, gravel, stones and dry running. The pump body is galvanized, the discharge hose is 5m and the hydraulic hoses are 7m, a hook is attached to the end of the discharge hose. AG21, hose size 3”, oil draw ...

    By Agronic Oy based in Haapavesi, FINLAND. from Hydraulic Submersible Pumps Product line

  • Livakka - 5` and 6` Front-Mounted Pump Crane

    5″ and 6″ front-mounted pump crane is mounted on the front of the drawbar by plate fitting. Because of plate fitting, it can also be easily retrofitted on older slurry tanker models. Filling on the right side of the tanker.

    By PEL-Tuote Oy based in Rantasalmi, FINLAND. from 5` and 6` Front-Mounted Pump Crane Product line

  • Model XL - Hydro Trike

    Extra extendable axle: more power, more output. Because of the on-going increase of scale and therefor the desire for more capacity, we developed the Hydro Trike XL. The tank of this version has a capacity of 20,5 m³, which is also ideal to empty a 36 m³ truck in 2 times. The otherwise optional Borger 1550 (9m³) pump is ...

    By Frans Vervaet B.V. Distributor in KANNUS, FINLAND.

  • Dellmeco - Model HP - High Pressure Plastic Pump with Booster

    The high pressure (HP) option is a compact booster that can be directly mounted to the pump. It is capable of doubling the delivery pressure and, for example, with an available air pressure of 7 bar the pressure can be up to 14 bar. The design is based upon the standard DELLMECO pump made from machined polyethylene (PE). A pressure regulator is ...

    By Dellmeco Distributor in SIPOO-BOX, FINLAND. from High Pressure Plastic Pump with Booster Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you