Only show results available in Virginia? Ok

soil piezometer equipment

  • Premium

    AMS - Piezometer Groundwater Sampling Kit

    The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Piezometer Groundwater Sampling Kit Product line

  • Cone Penetration Test (CPT)

    The cone penetration test (CPT) is an in situ testing method used to determine the geotechnical engineering properties of soils and delineating soil stratigraphy. The test method consists of pushing an instrumented cone tip first into the ground at a controlled rate (usually 2 centimeters/second). The resolution of the CPT in delineating ...

    By Zebra Environmental Corporation based in Lynbrook, NEW YORK (USA).

  • Piezopress System (PZP)

    The Piezopress System (PZP) consists of individual PVC piezometer pipes with removable pressure sensors. A special sensor seat over the tip of the filter provides a closed measuring cell at the depth of the test interval. This permits the monitoring of the hydraulic pressure in low-permeability rocks and soils. The Piezopress is an inexpensive ...

    By Solexperts AG based in Mönchaltorf, SWITZERLAND. from Piezopress System (PZP) Product line

  • Vibrating Wire Piezometer

    The vibrating-wire piezometer is widely used for measuring pore water pressure in soil and rocks and for measuring groundwater level. The extremely sturdy, long-lasting sensor consists of a cylindrical stainless steel casing housing a vibrating-wire absolute pressure transducer, a fluid chamber and a sintered filter The pressure exercised by the ...

    By Earth System s.r.l. based in Pilastrello Parma, ITALY. from Vibrating Wire Piezometer Product line

  • Solinst - Model 615 - Drive-Point Piezometer

    The Model 615 Drive-Point Piezometer is designed as an affordable method to monitor shallow groundwater and soil vapor in suitable conditions.

    By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Drive-Point Piezometer Product line

  • Model EPP-30V - Vibrating Wire Piezometer

    EPP-30V is a vibrating wire piezometer used to measure pore water pressure in soil, earth/rockfills, foundations and concrete structures. EPP-30V is of stainless steel construction and hermetically sealed under a vacuum of 0.001 Torr. Each sensor has built-in thermistor for temperature measurement and surge arrestor for lightning protection. A ...

    By Encardio-Moniterra Group based in NICOSIA, CYPRUS. from Vibrating Wire Piezometer Product line

  • Geonor - Model M-600 Series - Vibrating Wire Piezometer

    The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill a borehole. As with all other Geonor vibrating wire piezometers, the M-600 series offer the maximum reliability available for continuous pore water pressure or ground water level measurements. Geonor *s ...

    By Geonor AS based in Østerås, NORWAY. from Vibrating Wire Piezometer Product line

  • Model PK - Vibrating Wire Piezometers

    Vibrating wire piezometers are used to monitor pore-water pressure in soils. They are typically sealed in boreholes but can also be embedded in fills, or suspended in a well. Typical applications include evaluating slope stability, dewatering and drainage schemes, overpressure in silt and clay soils, permeability and hydraulic gradients in dams, ...

    By Sisgeo S.r.l. based in Masate (MI), ITALY. from Vibrating Wire Piezometers Product line

  • Model 615 - Drive-Point Piezometer

    The Model 615 Drive-Point Piezometers use a high quality stainless steel piezometer tip, 3/4' NPT pipe for drive extensions and LDPE or Teflon sample tubing, if desired. Combine these with an inexpensive Slide Hammer and you have a complete system.615N Simple Well Point • Water Level Monitoring and Groundwater Sampling. 615 Barbed Fitting; 1/2' ID ...

    By LaGa Systems Pvt Ltd based in Hyderabad, INDIA.

  • BAT - Model GMS - Permeameter

    BAT Permeameter Using the the BAT GMS, in situ hydraulic conductivity tests can be routinely performed, both in unsaturated and saturated soils. The BAT Permeameter combines with the BAT Piezometer equipment and the BAT MkIII Filter tip.

    By BAT Geosystems AB based in Stenkullen, SWEDEN.

  • Open Standpipe Piezometer

    Geotech open standpipe piezometers for measuring ground water level are made of sintered bronze filters and can be directly pushed into the soil without pre-drilling. The piezometer is used together with 1' tubes where standard water level meters are lowered into. It is also possible to use a hose for quicker detection of ground water changes. The ...

    By Ingenjörsfirman Geotech AB based in Askim, SWEDEN. from Open Standpipe Piezometer Product line

  • Model Vwp3000 Series - Piezometers

    Used for accurate measurement of pore water pressure in fully or partially saturated soil and rock. Pore pressure measurements in foundations, embankments retaining walls and dams. Fluid pressures in hydro-fracture & pump tests. Stability monitoring of tunnels, pipelines, mines and other underground engineering works. Draw down and recovery ...

    By NVM Limited Ireland based in Drogheda, IRELAND. from Piezometers Product line

  • Model MEMS - Piezometer Modem Logger

    The MEMS Piezometer Modem Logger combines a high capacity GSM/GPRS enabled datalogger with a small diameter MEMS Piezometer for use in fully or partially saturated soil and rock. Readings are stored on a local SD card and are transmitted in engineering units to any FTP site via the on-board Quad band GSM/GPRS modem. Logger settings are easily ...

    By Soil Instruments Ltd, a Division of Nova Metrix LLC. based in Uckfield, UNITED KINGDOM. from Piezometer Modem Logger Product line

  • BAT - Piezometer

    BAT Piezometer is an innovative and proven technology for pore pressure measurements, which has been on the market for more than twenty years. Through the years BAT has gained a lot of experience within the field of pore pressure measurements, which we share with our clients to determine the best instrumentation to meet the specific needs for ...

    By BAT Geosystems AB based in Stenkullen, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you