Solar Thermal Equipment Available In Quebec
-
Manufactured by Thermo-System Industrie- & Trocknungstechnik GmbHbased in GERMANY
The SludgeManager combines the good points of the proven Electric Mole™, such as robustness, ease of maintenance and stainless-steel construction, with the advantages of fully automated operation. It has been developed jointly by Thermo-System, the ACAT company and the University of Hohenheim. In contrast to the drying process with the Electric Mole, the SludgeManager™ can convey the ...
-
Manufactured by PAW GmbH & Co. KGbased in GERMANY
Application range: for charging domestic hot water tanks. Range of application: up to 36 m² of collector surface. with heat quantity measurement according to the BAFA promotion directive for solar thermal systems.The CE-conformity of the installation has been certified according to DIN EN ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
Chemfilm DF1400 and DF1471 are multilayer cast PTFE films produced using a proprietary process. The DF1400 has a non-conductive, fully fused, PTFE core coated with a conductive fluoropolymer formulation designed to be applied over jacketed wire and cable using standard tape-wrap equipment. The DF1471 is a fully conductive ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
CHEMFILM Skived PTFE and UHMW Film is used in various applications including high temperature wire and cable insulation, aerospace and automotive wire harness wrap, components in high frequency microwave electronics laminates, release film, non-stick surfaces, components in flexible hoses, gaskets, bearing and abrasion resistance surfaces, chemical storage containers, diaphragms, and other high ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
CHEMFILM DF1700 and DF1900 are heat bondable multilayer cast fluoropolymer films produced using a proprietary process. These films have a PTFE core with a thin layer of FEP or PFA on one surface. Double bondable (DB) films are also available with PFA on either surfaces or FEP on one surface and PFA on the other surface. Laser markable (LM) films are also available. DF1700 is available from ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
A porous form of PTFE (polytetrafluoroethylene), ZITEX G exhibits the same chemical inertness, thermal stability and non-wetting characteristics of this outstanding fluoropolymer. ZITEX G structures are able to handle virtually any corrosive fluid at temperatures as high as 500oF (260oC) and as low as the cryogenic range of -450oF ...
-
Manufactured by Thermo-System Industrie- & Trocknungstechnik GmbHbased in GERMANY
Drying with theElectric Moleis a batch or semi-continuous process that always ensures optimal drying performance, independent of sludge characteristics, weather conditions and energy ...
-
Manufactured by KW Solar, S.L., Renewable Energybased in SPAIN
In this type, the solar panel is usually mounted on the roof of the house, and the water tank is positioned somewhere inside the house, preferably as near as possible to where the hot water is finally used. A mains powered circulation pump is used to transfer the solar fluid between the solar panel and the water storage tank, transferring the ...
-
Manufactured by KW Solar, S.L., Renewable Energybased in SPAIN
The "compact" systems have the solar collector and the water tank together. It is a passive system, which means that no pump or other external devices are necessary. It is a very good solution, if we do not have electricity available. The water is heated up directly by the solar collector, with almost no losses in the heat transfer from the ...
-
Manufactured by Apricus Solar Co. Ltdbased in CHINA
The Apricus Closed Loop Pump Station (CLPS) is designed to be used in residential solar thermal systems. All components were designed to streamline the installation ...
-
Manufactured by Cicrosa Hidraulicabased in SPAIN
On this cylinder we incorporate seals with low-resistance to sliding and high stability that improve cylinder performance when working high speed, low wear and/or when needed a steadily starting (stick-slip free). Application examples: solar trackers and solar thermal installations. These are several examples of special cylinders ...
-
Manufactured by Apricus Solar Co. Ltdbased in CHINA
The Apricus Direct Flow Pump Station (DFPS) is designed to be used in residential solar thermal systems where the installation site does not normally see freezing temperatures and potable water circulates through the collector(s). All components needed for the solar pumping center are included to streamline the installation ...
-
Manufactured by Lasian S.L.based in SPAIN
Vitrified liquid steel tanks and double coil, optimised for maximum continuous flow of DHW with a heat source from any type of boiler or solar thermal collector, etc. Designed especially for use in solar energy installations (complies with the TBC), easily exceeding the requirement of 0.15m2 heat exchange surface per 50 litres of ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The ST-110 is a high accuracy thermistor (± 0.1 C from -40 to 60 C) designed to minimize solar load and thermal conduction. White heat shrink is used on the cable behind the thermistor to reduce solar load. Constantan wire is used to minimize thermal conduction down the wire towards the thermistor. ...
-
Manufactured by TYFOROP Chemie GmbHbased in GERMANY
TYFOCOR L is a long-life corrosion-inhibiting antifreeze based on propylene glycol for heating and air-conditioning, solar thermal, and heat pump systems. It is also used as a special food-grade brine by food and beverage manufacturers and is supplied both as a concentrate and a pre-mixed, ready-to-use ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The ST-300 is a high accuracy PRT (Platinum Resistance Thermometer),(1/10 DIN) designed to minimize solar load and thermal mass. White heat shrink is used on the cable behind the PRT to reduce solar load. PRT sheath dimensions are 3.18 mm diameter and 63.5 mm length, minimizing thermal mass. ...
-
Manufactured by Hidroambientebased in SPAIN
. Zero Discharge, etc. Coal-fired Power Plants, combined cycle power plants, nuclear power plants and solar thermal power plants. ...
-
Manufactured by Acksen Ltd.based in UNITED KINGDOM
The SR-1R data logger is used by installers, householders, renewable energy companies to assess proposed locations for a PV (photovoltaic) and Solar Thermal installations. It can record solar irradiation up to 1500W/m2 (watts per square metre), allowing you to estimate the amount of solar energy a given site will have. The ...
-
Manufactured by LOVATO S.p.Abased in ITALY
The management of the thermal solar system by controller LovaSOL MTDC is made through the analysis of the temperature difference measured by the sensors. The pump is switched on in funtion of the difference of the at measured and Δt set. The controller allows to manage 15 different basic ...
-
Manufactured by Hydro Solar Innovative Energybased in CANADA
that can be combined in one (with the optional Coils Connection Piece). This gives our combined tank the flexibility to be used for various hydronic applications. They are a smart use when combing Air to Water Heat Pump, Thermal Solar Panels (such as Vacuum Tubes Solar Collectors) and conventional Make-up heat producing equipment (such as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you