solid waste equipment in Michigan

  • Wastewater and Solid Waste Engineering Services

    When companies or entire communities need assistance with the management of wastewater and solid waste, Performance Environmental can help by offering several services. We assist municipalities by providing expertise in the area of landfill engineering, assessing environmental factors such as soils and the risk of hazardous waste contamination to ...

    By Performance Environmental Services, Inc. based in Wixom, MICHIGAN (USA).

  • Benlee - Model PUP - Roll off Trailer

    Roll off Trailer Pup that is recommended for solid waste, municipalities, general recycling, scrap recycling, industrial waste.

    By Benlee, Inc. based in Romulus, MICHIGAN (USA). from Roll off Trailer Product line

  • Model WE-MC-S - Solids Filter & Dewatering Cart

    The WE-MC-S solids filter & dewatering cart is a unit intended for the separation of gross solids from a waste stream. Typically the WE-MC-S unit is used in conjunction with a cone bottomed settling tank.

    By Wastewater Engineers, Inc. based in Oxford, MICHIGAN (USA).

  • Model S-222 A & E Series - Lift Stations

    These units are engineered as a receiving sump for the fast evacuation of solids laden waste streams. These units are situated at the discharge end of the waste generating equipment to rapidly move the waste from the point of generation to a storage/collection area with a minimum of settling out of solids. Each unit is supplied with either an ...

    By Wastewater Engineers, Inc. based in Oxford, MICHIGAN (USA). from Lift Stations Product line

  • Premium

    CTP AutoTherm - Regenerative Thermal Oxidation

    The perfect CTP solution for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to +400°C.

  • CTP - Model AutoTherm - Regenerative Thermal Oxidation

    The perfect CTP solution for increased solid matter content (dust), sticky substances or corrosive components in the waste gas.The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to +400°C.

    By CTP Sinto America, LLC based in Lansing, MICHIGAN (USA). from Regenerative Thermal Oxidation Product line

  • Alfa Laval - Decanter Centrifuge

    Horizontal Bowl centrifuges are also known as decanter centrifuges, centrifugal decanters or simply decanter machines and are primarily used for separation of liquids from appreciable amounts of solids. Decanters can separate over 50% (v/v) solids from liquids on a continuous basis. Typical industrial decanter applications include Crude Oil Tank ...

    By Dolphin Marine Services Inc. based in Warren, MICHIGAN (USA).

  • Paralle - Vertical Plate Clarifier

    The Monroe Parallel Plate Vertical Clarifier is designed to provide low cost, efficient solids removal from a wide range of waste and process liquids. The inclined plate design allows the total gravity settling area to be as much as ten times more than the actual floor space occupied by the clarifier. Integral chemical mixing and flocculation ...

    By Monroe Environmental Corporation based in Monroe, MICHIGAN (USA). from Vertical Plate Clarifier Product line

  • PRAB - Guardian Coolant Recycling System

    The more you can clarify your metalworking coolants, the less waste you'll haul away. You can cut your coolant waste disposal costs up to 90% and your need to buy new coolant up to 75% with PRAB's Guardian coolant recycling system. This versatile fluid collection point removes tramp oils and suspended solids from contaminated coolant, controls ...

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Guardian Coolant Recycling System Product line

  • Model Batch Reclamation Series - Metalworking Coolants, Oils and Industrial Washer Solutions

    SRS's Batch Reclamation Systems (BRS) is the ideal fluid reclamation system for plants that use industrial metalworking coolants, straight cutting oils and industrial washer solutions. The BRS systems will reduce your waste fluids by 50 – 85%, with process rates of 300 – 1500 gallons per hour. All BRS systems have been designed to ...

  • Premium

    Hoover Ferguson - Recycling Compactors

    Recyclable materials such as aluminum, paper, cardboard, tin, PETE plastics are separated at the source and compacted. Compact recyclable solid waste materials into disposable bags utilizing multiple compaction chambers on a rotating table. Total footprint is enclosed with drip pan and drain plugs. In bag (woven polypropylene) compaction with a ...

    By Hoover Ferguson Distributor in Livonia, MICHIGAN (USA). from Recycling Compactors Product line

  • Premium

    Hoover Ferguson - Marine Green Compactors

    Marine Green Compactor. Segregate and compact solid waste material into wheeled carts for recycling and convenience. Enclosed structure for compaction operations. Carts provided with positive lock in restraint system, secures cart into compactor or to bulkhead. Cart door with latch engineered for gradual release. No ramps needed for placement and ...

    By Hoover Ferguson Distributor in Livonia, MICHIGAN (USA). from Marine Green Compactors Product line

  • SHRED - Waste Grinders

    Our SHRED grinders range from small, compact units up to mammoth waste shredders that quickly cut problem solids down to size. Two rows of sharp, steel cutters rotate slowly and with incredibly high-torque to turn large troublesome solids into tiny particles. We can even stack shredders in order to turn very large solids into tiny pieces.

    By JWC Environmental - a Sulzer Brand Distributor in Howell, MICHIGAN (USA). from Waste Grinders Product line

  • Solids Handling Pumps

    Cornell offers a wide range of solids handling pumps, from 1.25” though 30” discharge size, to handle the most difficult waste water applications. Cornell solids handling pumps can be found in a wide range of applications in the Municipal, Agricultural, and Industrial markets; and available in a variety of mounting configurations ...

    By Cornell Pump Company Distributor in MICHIGAN (USA).

  • CLEARTREAT - Model 1000 Series - Clay-Based Agglomeration Material

    CLEARTREAT 1000 Series is a clay-based agglomeration material in powder/granular form for treating industrial wastewater. Its function is to add suspended solids to waste streams whose total dissolved and suspended solids are not adequate in quality or c.

    By Wyo-Ben, Inc. Distributor in Kalamazoo, MICHIGAN (USA). from Clay-Based Agglomeration Material Product line

  • EPG - Model TTE100-CX - Temperature Sensor

    EPG Temperature Sensors are designed to be used in landfill recirculation and bioreactor systems to sense the temperature of their surroundings. Research has shown that monitoring and controlling temperature within the landfill will decrease the time necessary to degrade municipal solid waste. When used with EPG moisture, leak ...

    By EPG Companies Inc. Distributor in Durand, MICHIGAN (USA). from Temperature Sensor Product line

  • RUNI - Separating cartons and liquids creating two waste streams

    100 % product destruction ensures that products are not resold or used internally. Save space and handling costs by compacting cartons early in the process. Save costs by separating into two waste streams – liquids and solids. Filling plants, dairies and other producers of drinks such as juice, yoghurt and other beverage cartons, destroy ...

    By Runi A/S Distributor in MICHIGAN (USA). from Separating cartons and liquids creating two waste streams Product line

  • Model TDS 820 - Slow Speed Shredders

    The Terex TDS 820 slow speed shredder is purpose-built to process all types of material, whether it is domestic, industrial or bulky solid waste. This industrial shredder features customizable shredding programs that give operators the opportunity to configure the machine to their specific requirements, reduce material wrapping and maximize ...

    By Terex Distributor in Byron Center, MICHIGAN (USA). from Slow Speed Shredders Product line

  • Model UT - 1-phase / 3-phase / 50Hz - Sewage Pumps

    The UT pump features a vortex (eddy flow) structure and wide pump casing interior, preventing clogging by waste and solid matter.

    By Tsurumi Pumps Distributor in MICHIGAN (USA). from Sewage Pumps Product line

  • Cusco - Industrial Vac Trucks

    As Cusco’s most popular choice of vacuum equipment, our Industrial Vac is the desired unit for industrial cleanup and environmental remediation work. The available vacuum systems range from 350 CFM to 670 CFM and generate 28″ Hg of vacuum, making it ideal for picking up and removing liquid or semi-solid waste materials. With its ...

    By Cusco Fabricators, Inc. Distributor in Northville, MICHIGAN (USA). from Industrial Vac Trucks Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you