solids pumping equipment in California

  • SHD - Solids Handling Pump

    The Ruhrpumpen Type SHD pump is a vertical or horizontal pump for solid handling. The vertically mounted pump that has a structurally sufficient base to support the pump, motor and accessories and the horizontally mounted pump is mounted on a common base plate with the driver. With a single impeller with a suction non-clog design and a single ...

    By RUHRPUMPEN GmbH Office in Orland, CALIFORNIA (USA). from SHD - Solids Handling Pump Product line

  • H2O - Macerator Pump

    Also known as a cutter pump, or a solids handling pump, our vacuum macerator pump uses the principle of differential air pressure to transport sewage from the toilet, macerate it into tiny particles and pump it to our sewage treatment unit or holding tank.

    By H2O Inc. based in Lafayette , LA, CALIFORNIA (USA). from Macerator Pump Product line

  • EDDY - 2-Inch Commercial Line Slurry Pump

    The 2-Inch commercial line slurry pump by EDDY Pump. Our industrial pumps are non-clog pumps designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

    By EDDY Pump based in El Cajon, CALIFORNIA (USA). from 2-Inch Commercial Line Slurry Pump Product line

  • Grinder Pumps

    Submersible grinder pumps are able to pump soft organic solids in suspension, by shredding to slurry. Grinder pumps are ideal for: Grey water pumping; Sump emptying; Septic effluent & sewage water disposal

    By F & Q Pumps, Inc. based in South El Monte, CALIFORNIA (USA). from Grinder Pumps Product line

  • Sludge Pump

    The Allegro Sludge Pump is excellent for pumping standing water containing sand, solids, leaves,or debris. This Allegro pump can pump at a maximum of 50 gallons per minute. Features double inside mechanical seals with silicon carbide faces and the most durable seal design available; a 403 stainless steel sleeve. The motor is continuously filled ...

    By Enviro Safety Products based in Visalia, CALIFORNIA (USA). from Sludge Pump Product line

  • Electric Submersible Pumps

    Ideal Usage: Removing water and handling solids up to 3.15' when electric power source is available.

    By BakerCorp based in Shafter, CALIFORNIA (USA). from Electric Submersible Pumps Product line

  • Griffin - Trash Pumps

    Griffin's Self Priming Trash Pumps are available in 4' and 6' models standard that do not require additional priming systems. These pumps are wet-priming portable pumps. They operate efficiently under intermittent flow conditions. These pumps are capable of handling high flows and head conditions exceeding 125 ft. The pump includes a suction ...

    By Griffin Dewatering Corporation Office in Ontario, CALIFORNIA (USA). from Trash Pumps Product line

  • Discflo - Submersible Pump

    Discflo offers two lines of sanitary pumps, the SP Series and MIS Series. Both series meet 3-A sanitary and international hygiene standards and USDA requirements. They can be supplied in Clean-in-Place or Steam-in-Place versions, and in a variety of metallurgy to meet the user’s requirements. Discflo’s submersible pumps are the perfect ...

    By Discflo Corporation Inc. based in Santee, CALIFORNIA (USA).

  • Discflo - Model ANSI - Disc Pumps

    Discflo’s ANSI Pump has been employed in the following applications: slurry gel, polymer emulsions, produced water, chemical slurry, liquid tetrahydrafuran, pulp, seawater with cuttings, teflon dispersions, acetone solution and wastewater sludge. Discflo’s ANSI Disc Pump offers unique productivity and cost-saving benefits for users in ...

    By Discflo Corporation Inc. based in Santee, CALIFORNIA (USA).

  • EDDY - 6-Inch Commercial Line Slurry Pump

    The 6-Inch commercial line slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in commercial or extra heavy duty (HD) class. Also, all of our pumps can be setup horizontal or vertical. Our industrial pumps are non-clog pumps designed for high solids pumping applications. Our patented pump technology outperforms all ...

    By EDDY Pump based in El Cajon, CALIFORNIA (USA). from 6-Inch Commercial Line Slurry Pump Product line

  • EDDY - 4-Inch Commercial Line Slurry Pump

    The 4-Inch commercial line slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in commercial or extra heavy duty (HD) class. Also, all of our pumps can be setup horizontal or vertical. Our industrial pumps are non-clog pumps designed for high solids pumping applications. Our patented pump technology outperforms all ...

    By EDDY Pump based in El Cajon, CALIFORNIA (USA). from 4-Inch Commercial Line Slurry Pump Product line

  • Model AUP Series - Submersible Water Pumps

    Stainless Steel Motor Housing. Fiberglass Reinforced Engineering Composite Body. Detachable Base Strainer. Non-Clog Vortex Impeller For Free. Passage of Large Solids & Fibers. Continuous Duty Submersible Pump.

    By Alita Industries Inc. based in Arcadia, CALIFORNIA (USA). from Submersible Water Pumps Product line

  • Model EF Series - Submersible Sewage Pumps

    Non-clogging impeller minimizes abrasives wear and allows large solid passage. Dry motor with overload protector; Cable with an epoxy resin sealed water-proof cable hood; Use deep groove C3 bearing to extend life time. Superior abrasion resistant double mechanical seal to ensure best seal effect. Oil seal mounted outside of seal chamber stops ...

    By C & M Electric Actuators Office in Burbank, CALIFORNIA (USA). from Submersible Sewage Pumps Product line

  • Kracht - Model BT/BTH - Transfer Gear Pump

    Pump series BT and BTH are low speed gear pumps for transfering medium and high viscosity fluids, provided they have certain minimum amount of lubricating property, do not contain any solids and are chemically compatable with the materials of construction.

    By Process Pump Sales Inc based in Poway, CALIFORNIA (USA). from Transfer Gear Pump Product line

  • STT - Submersible Pump

    The Ruhrpumpen Type STT is a submersible pump with non-clogging and non-stringing two-channel impeller in pot design for vertical wet-pit or dry-pit installation and universal use, suitable for pumping sewage with coarse solid matter and fibrous content without upstream screen.

    By RUHRPUMPEN GmbH Office in Orland, CALIFORNIA (USA). from STT - Submersible Pump Product line

  • WSP - Chop-Flow Pumps

    Created by the same engineers and manufactured side-by-side with the dependable WEMCO pumps, the WSP Chop-Flow pump is just as rugged and dependable. The WSP Model CF Chop-Flow pump chops as it pumps, keeping oversized solids and stringy material from clogging your downstream process.

    By Weir Power & Industrial Office in Fresno, CALIFORNIA (USA). from Chop-Flow Pumps Product line

  • Warman - Model Q-Series QCV - Axial Flow Pump

    The Warman Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. The Warman Q-Series Axial Flow Pumps offer high quality and reliability, high efficiencies and low energy consumption for continuous circulation of ...

    By Weir Power & Industrial Office in Fresno, CALIFORNIA (USA). from Axial Flow Pump Product line

  • PowerPrime - Model XH80c - Trailer Mounted Pump

    The XH80c is a high head, high flow 4”x3” pump offering flow rates up to 1,000 GPM and 800 feet of head. The trailer mounted pump comes with the option of Ductile Iron or CD4MCu, allowing for safe management of caustic and abrasive liquids and solids up to .70” in diameter. The PowerPrime® venturi automatic self-priming ...

    By Power Prime Pumps based in Bakersfield, CALIFORNIA (USA). from Trailer Mounted Pump Product line

  • AutoPump - Air-Powered Remediation Pumps for Landfill Pumping

    AutoPump Automatic Air-Powered Remediation and Leachate & Methane Condensate Pumps. QED’s AutoPumps originated the automatic air-powered pump concept in 1986 and has led the industry ever since. AutoPumps were designed specifically to handle difficult conditions reliably and safely, including hydrocarbon (LNAPL and dissolved phase) ...

    By QED Environmental Systems, Inc Office in San Leandro, CALIFORNIA (USA). from Air-Powered Remediation Pumps for Landfill Pumping Product line

  • AutoPump - Model AP4+ - Landfill and Remediation Pumping

    The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ...

    By QED Environmental Systems, Inc Office in San Leandro, CALIFORNIA (USA). from Landfill and Remediation Pumping Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you