solids pumping equipment in Indiana

  • QuikSoil - Model 2900 - Bio Solids

    The dosage rate for QuikSoil 2900 ranges from 3 to 6 ounces per wet ton of biosolids, depending on intensity and offensiveness of the odor. Water is added to the QuikSoil® 2900 to provide enough liquid to facilitate mixing. Typically, 80 to 100 ounces of water are added to each wet ton along with the 2900. This amounts to 6 to 7 pounds of ...

    By Global Odor Control Technologies, LLC (GOC) based in Bloomington,, INDIANA (USA). from Bio Solids Product line

  • Griffin - Trash Pumps

    Griffin's Self Priming Trash Pumps are available in 4' and 6' models standard that do not require additional priming systems. These pumps are wet-priming portable pumps. They operate efficiently under intermittent flow conditions. These pumps are capable of handling high flows and head conditions exceeding 125 ft. The pump includes a suction ...

    By Griffin Dewatering Corporation Office in Hammond, INDIANA (USA). from Trash Pumps Product line

  • Single Diaphragm Pump

    Diaphragm pumps are ideally suited for all sectors of the construction industry as well as for municipal and industrial applications where dry priming pumps are required. They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids. One of the best features of the diaphragm pumps is that they can run ...

    By Patriot Pumps Office in Indianapolis, INDIANA (USA). from Single Diaphragm Pump Product line

  • Double Diaphragm Pump

    Diaphragm pumps are ideally suited for all sectors of the construction industry as well as for municipal and industrial applications where dry priming pumps are required. They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids. One of the best features of the diaphragm pumps is that they can run ...

    By Patriot Pumps Office in Indianapolis, INDIANA (USA). from Double Diaphragm Pump Product line

  • Standard Trash Pump (GST)

    Global Pump Standard Trash pumps are specifically designed to effectively handle a wide range of liquids from water and sewage, to sludge that can contain solids and other material. Global Pump Standard Trash pumps, with advanced enclosed impeller design, provide a dependable, highly efficient solution in a completely automatic priming pump.

    By Global Pump - a Mersino Company Office in Michigan City, INDIANA (USA). from Standard Trash Pump (GST) Product line

  • Griffin - Hydraulic Driven Submersible Pumps

    Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4” to 24” with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to ...

    By Griffin Dewatering Corporation Office in Hammond, INDIANA (USA). from Hydraulic Driven Submersible Pumps Product line

  • High Performance Trash Pumps (GHT)

    Global Pump High Performance Trash pumps are specifically designed to effectively handle a wide range of liquids from water and sewage, to sludge that can contain solids and other material. Global Pump High Performance Trash pumps, with advanced enclosed impeller design, provide a dependable, highly efficient solution in a completely automatic ...

    By Global Pump - a Mersino Company Office in Michigan City, INDIANA (USA). from High Performance Trash Pumps (GHT) Product line

  • Thompson - Heavy Duty Trash

    Thompson trash pumps are specified for the really tough jobs where a wet priming pump capable of handling large solids and/or abrasive material is needed. Thompson trash pumps outperform other centrifugal trash pumps on the market and cost less to operate. The quality and dependability engineered into each Thompson heavy duty trash pump provides ...

    By Patriot Pumps Office in Indianapolis, INDIANA (USA). from Heavy Duty Trash Product line

  • Vacuum Assisted Dry Prime Series

    Thompson engineers developed a series of high pressure jet pumps that can handle liquids with larger solids and more air than standard end-suction centrifugal pumps. By increasing the impeller size and adding the Super Suction Vacuum-Assisted Priming System, Thompson JSV High Pressure Jet Pumps are able to pass large amounts of solids and able to ...

    By Patriot Pumps Office in Indianapolis, INDIANA (USA). from Vacuum Assisted Dry Prime Series Product line

  • 4-20mA Amp Probe

    The current sensor will monitor AC motor amperage from 0-250 amps.  The sensor outputs a 2-wire, 4-20mA signal.  The sensors are a solid-core, where the conductor runs through the sensor.  Amp probes are not needed to calculate pump on/off cycles and runtime, but are recommended to display pump amperage.  Works only with ...

    By OmniSite based in Indianapolis, INDIANA (USA). from 4-20mA Amp Probe Product line

  • Environmentalist - Non Chemical Water Treatment Systems

    The “ENVIRONMENTALIST®” is a totally self-contained system which consists of three primary components: a pump, a centrifugal solids separator and a Superior Water Conditioner®. This system will reduce the amount of discharge water that is normally sent to the drain (by most chemically treated cooling tower systems) by as much ...

    By Superior Manufacturing Corporation based in Fort Wayne, INDIANA (USA). from Non Chemical Water Treatment Systems Product line

  • Solids Handling Pumps

    Cornell solids handling pumps that can produce up to 200 PSI. Unique benefits, including the Run-Dry® System, Cycloseal and Redi-Prime®, make Cornell the benchmark in Agricultural pumping applications.

    By Cadman Power Equipment Ltd. Distributor in Onward, INDIANA (USA). from Solids Handling Pumps Product line

  • Premium

    Verderflex - Model Rollit H 19SH - Single Head Pump

    Maximum flow rate : 500 l/hr. Maximum speed : 165 RPM. Maximum discharge pressure : 2 bar. Maximum suction lift : 7 mWc. Maximum temperature of medium : 80°C. Maximum motor power : 0.37 KW. Maximum Solids Content : 14 mm compressible 1mm smooth incompressible. Nominal hose diameter : 19 mm. Hose options : Natural Rubber (NR), Neoprene (CR) and ...

    By Verderflex Peristaltic Pumps - part of the Verder Group Distributor in INDIANA (USA). from Single Head Pump Product line

  • Gorman-Rupp - Model SF Series (Infinity) - Submersible Solids-handling Pumps

    Gorman-Rupp SF Series submersible solids-handling pumps are designed to provide you with the ultimate in pumping performance. All SF Series pumps use NEMA Premium Efficiency motors and pass a minimum 3' spherical solid. Vortex pumps use the patent-pending Staggerwing impeller technology. SF Series submersible solids-handling pumps are available in ...

    By Gorman-Rupp Co. Distributor in INDIANA (USA). from Submersible Solids-handling Pumps Product line

  • Premium

    Verderflex - Model Rollit H 35SH - Single Head Pump

    Maximum flow rate : 3816 l/hr. Maximum speed : 165 RPM. Maximum discharge pressure :2 bar. Maximum suction lift : 7 mWc. Maximum temperature of medium : 80°C * Maximum motor power : 0.37 KW. Maximum Solids Content : 22 mm compressible 1mm smooth incompressible. Nominal hose diameter : 30 mm. Hose options : Natural Rubber (NR), Neoprene (CR) ...

    By Verderflex Peristaltic Pumps - part of the Verder Group Distributor in INDIANA (USA). from Single Head Pump Product line

  • Premium

    Verderflex - Model Rollit H 30SH - Single Head Pump

    Maximum flow rate : 2683 l/hr. Maximum speed : 165 RPM. Maximum discharge pressure : 2 bar. Maximum suction lift : 7 mWc. Maximum temperature of medium : 80°C *. Maximum motor power : 0.37 KW. Maximum Solids Content : 2.5mm compressible, 1mm smooth incompressible. Nominal hose diameter : 30 mm. Hose options : Natural Rubber (NR), Neoprene (CR) ...

    By Verderflex Peristaltic Pumps - part of the Verder Group Distributor in INDIANA (USA). from Single Head Pump Product line

  • Premium

    HIGH TC GEOTHERMAL GROUT - Enhanced Thermally Conductive Grout

    HIGH TC GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part, thermally conductive grouting material to improve the performance of ground source heat loop applications. HIGH TC GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) ...

    By Colloid Environmental Technologies Company (CETCO) Distributor in Indianapolis, INDIANA (USA). from Enhanced Thermally Conductive Grout Product line

  • Premium

    GEOTHERMAL - Enhanced Thermally Conductive Grout

    GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part thermally conductive grouting material to improve the performance of ground source heat loop applications. GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced ...

    By Colloid Environmental Technologies Company (CETCO) Distributor in Indianapolis, INDIANA (USA). from Enhanced Thermally Conductive Grout Product line

  • Super - Model U Series - Self-Priming Pumps

    Gorman-Rupp Super-U Series® pumps are among the most efficient self-priming, solids handling pumps available.  Their unique hydraulic design and smooth wall volute casing minimize friction loss and drag.  The multi-vane, open impeller is designed for high efficiency operation yet can still handle limited solids.  The pumps not ...

    By Gorman-Rupp Co. Distributor in INDIANA (USA). from Self-Priming Pumps Product line

  • Super - Model T Series - Self-Priming Pumps

    Designed for economical, trouble-free operation, the superior solids-handling capabilities of Super T Series® pumps make them ideally suited for a variety of applications including solids-laden liquids and slurries.  The large volute design allows automatic repriming in a completely open system without the need for suction or discharge ...

    By Gorman-Rupp Co. Distributor in INDIANA (USA). from Self-Priming Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you