solids pumping equipment in Kansas

  • Premium

    PISTA TURBO™ - Grit Pump

    Smith & Loveless’ rugged PISTA Turbo Grit Pump is the only pump in the industry exclusively designed for pumping grit separated from sewage. The PISTA Turbo Grit Pump is available in both top-mounted vacuum-primed and remote-mounted flooded-suction configurations. Equipped with a Ni-Hard volute and Ni-Hard recessed impeller mounted ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Grit Pump Product line

  • Chopper Pump

    A chopper pump is a centrifugal pump, which is equipped with a cutting system to facilitate chopping/maceration of solids that are present in the pumped liquid. The main advantage of this type of pump is that it prevents clogging of the pump itself and of the adjacent piping, as all the solids and stringy materials are macerated by the chopping ...

    By Haynes Equipment Co Inc based in Olathe, KANSAS (USA). from Chopper Pump Product line

  • Grit Pump

    Grit is highly abrasive. For wastewater treatment plants, grit is typically defined as an 'inorganic solid” and it can be made up of sand, grav­el, cinder, glass and other heavy inorganic material. The major abrading component of grit is silica sand. The amount of grit entering these plants varies. However, both facilities must ...

    By Haynes Equipment Co Inc based in Olathe, KANSAS (USA). from Grit Pump Product line

  • Premium

    S&L STAR ONE™ - Vacuum Prime Pump

    Our vertical, close-coupled STAR ONE™ S&L Non-Clog Pump design meets the highest of standards that promote superior efficiency, durability and ease of maintenance, including the 10 States Standard for 3” (76 mm) solids. Its rugged design, featuring exclusive oversized, stainless steel pump shafts and bearings, will typically ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Vacuum Prime Pump Product line

  • CDW - Ladder Pump Dredge

    Ladder Pump Dredger: A ladder pump dredge has the pump located as the name states on the ladder. Locating the pump on the ladder allows for the pump to become submerged when the ladder is lowered. When the pump is submerged it becomes more efficient and allows for a higher percentage of solids to be pumped through the system. Ladder pump dredges ...

    By Custom Dredge Works Inc. based in Topeka, KANSAS (USA). from Ladder Pump Dredge Product line

  • Premium

    Flottweg - Model OSE - Decanter Centrifuge

    The Flottweg OSE Decanter. Optimal Sludge Dewatering of Primary and Excess Sludge. The decomposition process in a sewage treatment facility continually generates biological sludge. To ensure a stable decomposition process in the biological cleaning stage, this biological sludge must be removed. The removed biological sludge is called surplus ...

    By Flottweg SE Office in Russel, KANSAS (USA).

  • Versi-Dredge - Model 5012 LP - Dredger for Standard Cutter

    Transportability: One truck transportable (fully assembled). Propulsion: Self-Propelled w/ IMS patented Starwheel Drive. Nominal Pump Capacity1: 795m3/hr. (1,033yds3/hr.). Total Solids Capacity2: 199m3/hr. (260 yds3/hr.). Dredging Depth: 6.7m (22 ft.). Total Installed Power: 242 kW (325 HP). Dry Weight: 13,180 kg (30,445 lbs.). Pipe Diameter: ...

    By IMS Dredges - a division of LWT, LLC based in Overland Park, KANSAS (USA). from Dredger for Standard Cutter Product line

  • Versi-Dredge - Model 5012 HP - Dredger for Standard Cutter

    Transportability: One truck transportable (fully assembled). Propulsion: Self-Propelled w/ IMS patented Starwheel Drive. Nominal Pump Capacity1: 795m3/hr. (1,033yds3/hr.). Total Solids Capacity2: 199m3/hr. (260 yds3/hr.). Dredging Depth: 6.7m (22 ft.). Total Installed Power: 242 kW (325 HP). Dry Weight: 13,180 kg (30,445 lbs.). Pipe Diameter: ...

    By IMS Dredges - a division of LWT, LLC based in Overland Park, KANSAS (USA). from Dredger for Standard Cutter Product line

  • Versi-Dredge - Model 7012 HP - Dredger for Standard Cutter

    Transportability: One truck transportable (fully assembled). Propulsion: Self-Propelled w/ IMS patented Starwheel Drive. Nominal Pump Capacity1: 1,135m3/hr. (1,475yds3/hr.). Total Solids Capacity2: 284m3/hr. (371 yds3/hr.). Dredging Depth: 9.1m (30 ft.). Total Installed Power: 332 kW (445 HP). Dry Weight: 21,636 kg (47,700 lbs.). Pipe Diameter: ...

    By IMS Dredges - a division of LWT, LLC based in Overland Park, KANSAS (USA). from Dredger for Standard Cutter Product line

  • Versi-Dredge - Model 5012 LP 2D - Dredger for Multi-Function Cutter

    Transportability: One truck transportable (fully assembled). Propulsion: Self-Propelled w/ IMS patented Starwheel Drive. Nominal Pump Capacity1: 795m3/hr. (1,033yds3/hr.). Total Solids Capacity2: 199m3/hr. (260 yds3/hr.). Dredging Depth: 6.7m (22 ft.). Total Installed Power: 242 kW (325 HP). Dry Weight: 13,180 kg (30,445 lbs.). Pipe Diameter: ...

    By IMS Dredges - a division of LWT, LLC based in Overland Park, KANSAS (USA). from Dredger for Multi-Function Cutter Product line

  • High Pressure Kits

    DewEze has a full line of high pressure clutch pump kits for almost any current model truck. DewEze kits allow you to operate knuckle boom cranes and hooklifts without the restrictions of a PTO. You will be able to operate these products in a broad engine RPM range and have the mobility you need to get the job done. Flows available from 3 ½ ...

    By Harper Industries Inc. based in Harper, KANSAS (USA). from High Pressure Kits Product line

  • Premium

    SaniTEE - Effluent Screening Device

    SaniTEE wastewater screens are now available in 4″, 8″ and 16″ sizes and provide consistent retention of wastewater solids for applications up to 20,000 gallons per day. Multiple SaniTEE screens can be used for flows above 20,000. SaniTEE Wastewater Screens SaniTEE self-cleaning wastewater deflection screens (commonly known as ...

    By BioMicrobics, Inc. based in Lenexa, KANSAS (USA). from Effluent Screening Device Product line

  • Oil/Water Separator - Slant Rib Coalescing Oil/Water Separator (SRC) & Fiberglass Tank Oil/Water Separator (SRM)

    Parkson’s Model SRC and SRM Oil/Water Separators offer a reliable, compact, and economical solution to a wide array of oil/water separation applications. The Oil/Water Separators remove free, non-emulsified oil and settleable solids to produce an effluent with less than 10 mg/l of oil droplets 20 micron or larger.The influent flow first enters an ...

  • Model Vault 50 Inch - Filtered Pump

    Hanging filtered pump vault installs into primary or pump tanks. Protects pump and disposal field from solids larger than 1/16”. All models available with 4 filter plates. Includes maintenance plate for servicing ease.

    By Quanics Incorporated Distributor in Olathe, KANSAS (USA). from Filtered Pump Product line

  • Model 70200 - Progressive Cavity Pumps

    Model 70200, the workhorse of our progressing cavity pump line, is ideal for handling a wide variety of materials which are often considered unpumpable. The 70200 offers the most economical solution for tough pumping problems like highly viscous, abrasive, shear sensitive, or solid-containing materials.

    By Roper Pump Company Distributor in Lenexa, KANSAS (USA). from Progressive Cavity Pumps Product line

  • Dolmar - Model MP-352.4 - 4-Stroke Water Pump

    Powerful, solid and quiet 4-Stroke engine with few emissions. Ideal for watering gardens and other landscapes where no electric power is available.

    By Dolmar Distributor in Bucyrus, KANSAS (USA). from 4-Stroke Water Pump Product line

  • Model 70500 - Progressive Cavity Pumps

    Its solid drive shaft makes the 70500 the pump of choice for handling anything with a tendency to set up -- and eventually build up -- in a hollow-shaft model. That includes thermosetting adhesives, concrete, grout, plaster and other materials which have the potential to harden inside the shaft. When these materials are allowed to build up and ...

    By Roper Pump Company Distributor in Lenexa, KANSAS (USA). from Progressive Cavity Pumps Product line

  • AutoPump - Air-Powered Remediation Pumps for Landfill Pumping

    AutoPump Automatic Air-Powered Remediation and Leachate & Methane Condensate Pumps. QED’s AutoPumps originated the automatic air-powered pump concept in 1986 and has led the industry ever since. AutoPumps were designed specifically to handle difficult conditions reliably and safely, including hydrocarbon (LNAPL and dissolved phase) ...

    By QED Environmental Systems, Inc Distributor in Lawrence, KANSAS (USA). from Air-Powered Remediation Pumps for Landfill Pumping Product line

  • AutoPump - Model AP4+ - Landfill and Remediation Pumping

    The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ...

    By QED Environmental Systems, Inc Distributor in Lawrence, KANSAS (USA). from Landfill and Remediation Pumping Product line

  • Engineered Pump Systems (EPS)

    Liberty offers Engineered Pump Systems (EPS) in various configurations.  From simplex to duplex grinder and solids handling systems, we can provide the specific pump system to meet your job requirements. Simply provide us your specifications and our technical sales department will draft a detailed quotation with drawings for your submittal ...

    By Liberty Pumps Distributor in Lenexa, KANSAS (USA). from Engineered Pump Systems (EPS) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you