solids pumping equipment in Massachusetts

  • Edson - Model 290-235-7.5E - Central Vacuum System for Multiple Station Applications

    High volume vacuum for Multiple station operation. Simultaneous pumping from up to 3 stations. 235 gal. Galvanized steel tank. Dry start lift to 25'. Pump up to 50% solids. Push button start/stop at Each station. Easy to use, low Maintenance operation.. All materials specified for The marine environment.

    By Edson International, Pumps Division based in New Bedford, MASSACHUSETTS (USA). from Central Vacuum System for Multiple Station Applications Product line

  • Hydro Quip - Above Ground Oil Water Separator

    Hydro Quip offers a complete line of Above Ground Rectangular Oil Water Separators for the effective separation of free and dispersed (non-emulsified) oil and settleable solids, that can be customized for your specific application. All our equipment meets or exceeds API 421 guidelines. The type of material and the type of media are always based on ...

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA). from Above Ground Oil Water Separator Product line

  • Hydro Quip - Hopper Oil Water Separators

    For the separation of free and dispersed (non-emulsified) oil, and collection of settleable solids and DNAPL for removal, Hydro Quip offers above ground oil water separators with hopper chamber that can be customized for your specific application. All our equipment meets or exceeds API 421 guidelines. The type of material and the type of ...

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA). from Hopper Oil Water Separators Product line

  • Prochem Maxflo - Model Mark II & III - Impeller Pumps

    High efficiency, high solidity impellers for use in turbulent side entering applications. They are especially effective for fluids possessing a yield value, such as paper stock. The high solidity permits operation nearer the boiling point without cavitation.

    By National Oilwell Varco Office in MASSACHUSETTS (USA). from Impeller Pumps Product line

  • Chemineer - Model S-4 - Impeller Pump

    A cost effective impeller for operation very near the floor of a tank for agitating the heel in solids suspension applications. Also an effective impeller in laminar flow applications, especially when impeller Reynolds numbers drop below 50.

    By National Oilwell Varco Office in MASSACHUSETTS (USA). from Impeller Pump Product line

  • Chemineer Impeller - Model P-4 - Impeller Pump

    A reasonably cost effective impeller in both turbulent and laminar flow. Good impeller for applications where the viscosity changes over a wide range causing the flow regime to vary between turbulent and laminar flow. A reasonably cost effective impeller for solids suspension.

    By National Oilwell Varco Office in MASSACHUSETTS (USA). from Impeller Pump Product line

  • Electric Submersible Pumps

    Ideal Usage: Removing water and handling solids up to 3.15' when electric power source is available.

    By BakerCorp Office in Oxford, MASSACHUSETTS (USA). from Electric Submersible Pumps Product line

  • Chemineer - Model RL-3 - Impeller Pump

    The Chemineer RL-3 impeller is designed for applications where a ragless agitator is desired to prevent fibrous material build-up on the rotating impeller. Typical in Waste Treatment applications the RL-3 is a rag shedding impeller which prevents build-up of fibrous materials on the impeller, while providing a strong axial flow for efficient ...

    By National Oilwell Varco Office in MASSACHUSETTS (USA). from Impeller Pump Product line

  • FMS EconoTrace - Parallel Solid Phase Extraction System

    The EconoTrace Parallel Solid Phase Extraction System is an automated. One-Step Extraction and Concentration System is designed to streamline your workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace® Parallel Solid Phase Extraction System uses consistant reproducible ...

    By Fluid Management Systems, Inc. (FMS) based in Watertown, MASSACHUSETTS (USA). from Parallel Solid Phase Extraction System Product line

  • Model B50 - Air Operated Diaphragm Pump

    B50 diaphragm pumps are characterized by exceptional performance, power, and strength, making them ideal for pumping liquids with very high apparent viscosity up to 50000 cps (at 20°C), even if containing suspended solids.

    By Clark Solutions based in Hudson, MASSACHUSETTS (USA). from Air Operated Diaphragm Pump Product line

  • Chemineer - Model HE-3 - High-Efficiency Impeller Pump

    An extremely efficient turbulent flow impeller for blending, heat transfer and solids suspension. Most effective for Reynolds numbers over 50. Developed to minimize the creation of trailing vortices and incorporating the otherwise wasted energy into macro-flow.

    By National Oilwell Varco Office in MASSACHUSETTS (USA). from High-Efficiency Impeller Pump Product line

  • Chemineer - Model XE-3 - High Efficiency Impeller Pump

    The highest efficiency turbulent flow impeller available in the marketplace. Ideal for blending, heat transfer, and solids suspension applications. Developed to maximize strength at lower weights as compared to other axial flow impellers, allowing for longer shafts without internal support, smaller shaft diameters, and smaller seal sizes if ...

    By National Oilwell Varco Office in MASSACHUSETTS (USA). from High Efficiency Impeller Pump Product line

  • Edson - Model 120A Series - Air Powered Diaphragm Pump

    Edson Air Powered Diaphragm Pumps are ideal for collection and transfer of liquid waste, dewatering, slurry, and filter applications. An externally mounted reciprocating air cylinder powers the single diaphragm at low air consumption rates. Open flow-through flapper valves and accurate, variable speed ceramic solenoid control make these pumps ...

    By Edson International, Pumps Division based in New Bedford, MASSACHUSETTS (USA). from Air Powered Diaphragm Pump Product line

  • Edson - Model 220ACB-150 - Air Powered Diaphragm Pump

    Edson Air Powered Diaphragm Pumps are ideal for collection and transfer of liquid waste, dewatering, slurry, and filter applications. An externally mounted reciprocating air cylinder powers the single diaphragm at low air consumption rates. Open flow-through flapper valves and accurate, variable speed ceramic 4-way valve make these pumps ideal for ...

    By Edson International, Pumps Division based in New Bedford, MASSACHUSETTS (USA). from Air Powered Diaphragm Pump Product line

  • Mid Air Operated Diaphragm Pump

    MID mini diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with very high apparent viscosity up to 50000 cps (at 20°C), even if containing suspended solids. The stall-prevention pneumatic system assures a safe running pump and it does not require lubricated air. Self-priming ...

    By Clark Solutions based in Hudson, MASSACHUSETTS (USA). from Mid Air Operated Diaphragm Pump Product line

  • Thermoplastic Sediment Strainers

    Sediment strainers protect pipeline components such as pumps and meters by removing suspended solids and impurities. Transparent thermoplastic construction permits easy detection of the screen's condition.

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA).

  • Excavation

    The diagram below shows a water treatment system in which contaminated groundwater at a construction site can be pumped away from the site and cleaned. Once the solid contaminants are filtered out, the clean effluent is then suitable for discharge to a municipal storm drain system or elsewhere.

    By BakerCorp Office in Oxford, MASSACHUSETTS (USA). from Excavation Product line

  • RUWAC - Model SPS 250-D 15 - Chip Extractors

    These specialist vacuum cleaners reliably separate liquids from solids. These models are suitable for cleaning machinery, removing wet chips and separating cutting oils and cooling lubricants. Particularly suitable for machining centres with extractor pump control; for continuous operation. The vacuum cleaners are tested by Eurofins (formerly ...

    By RUWAC Industriesauger GmbH Office in Holyoke, MASSACHUSETTS (USA). from Chip Extractors Product line

  • Solids Handling Pumps

    Cornell offers a wide range of solids handling pumps, from 1.25” though 30” discharge size, to handle the most difficult waste water applications. Cornell solids handling pumps can be found in a wide range of applications in the Municipal, Agricultural, and Industrial markets; and available in a variety of mounting configurations ...

    By Cornell Pump Company Distributor in MASSACHUSETTS (USA).

  • Submersible Solids Handling Pumps

    Cornell's Submersible pumps maintain superb operating efficiencies and are coupled with premium efficient motors. All come standard with heavy walled volutes for extended life under abrasive service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and Stainless Steel upper and intermediate guide ...

    By Cornell Pump Company Distributor in MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you