solids pumping equipment in Michigan

  • AMT - Self Priming Solids Handling Pedestal Drive Pumps

    AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. Specific units are available in cast aluminum, cast iron or thermoplastic construction material. The units feature 3/8' to 2' solids handling construction and are fitted with a cast iron bearing housing,which contains two or three precision sealed ball bearings ...

    By Detroit Pump & Mfg. Co. based in Grand Rapids, MICHIGAN (USA). from Self Priming Solids Handling Pedestal Drive Pumps Product line

  • Single Diaphragm Pump

    Diaphragm pumps are ideally suited for all sectors of the construction industry as well as for municipal and industrial applications where dry priming pumps are required. They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids. One of the best features of the diaphragm pumps is that they can run ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Single Diaphragm Pump Product line

  • Double Diaphragm Pump

    Diaphragm pumps are ideally suited for all sectors of the construction industry as well as for municipal and industrial applications where dry priming pumps are required. They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids. One of the best features of the diaphragm pumps is that they can run ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Double Diaphragm Pump Product line

  • AutoPump - Air-Powered Remediation Pumps for Landfill Pumping

    AutoPump Automatic Air-Powered Remediation and Leachate & Methane Condensate Pumps. QED’s AutoPumps originated the automatic air-powered pump concept in 1986 and has led the industry ever since. AutoPumps were designed specifically to handle difficult conditions reliably and safely, including hydrocarbon (LNAPL and dissolved phase) ...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA). from Air-Powered Remediation Pumps for Landfill Pumping Product line

  • AutoPump - Model AP4+ - Landfill and Remediation Pumping

    The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA). from Landfill and Remediation Pumping Product line

  • Standard Trash Pump (GST)

    Global Pump Standard Trash pumps are specifically designed to effectively handle a wide range of liquids from water and sewage, to sludge that can contain solids and other material. Global Pump Standard Trash pumps, with advanced enclosed impeller design, provide a dependable, highly efficient solution in a completely automatic priming pump.

    By Global Pump - a Mersino Company based in Davison, MICHIGAN (USA). from Standard Trash Pump (GST) Product line

  • RTM - Model G3 - On-Line Temperature, Solids & Liquid Level Tank Monitoring System

    G3 TANK VISION is your Internet Based Tank Monitoring Service providing daily data that can be analyzed by Facility Manager(s). G3 Assists in the Following: Pump Scheduling, Pumper Evaluation, Tank Functionality, Plumbing Issues Related to Grease Trap, Emergency Service Notification, Reporting to City Officials.

    By Remote Tank Monitors L.L.C. based in Saginaw, MICHIGAN (USA).

  • High Performance Trash Pumps (GHT)

    Global Pump High Performance Trash pumps are specifically designed to effectively handle a wide range of liquids from water and sewage, to sludge that can contain solids and other material. Global Pump High Performance Trash pumps, with advanced enclosed impeller design, provide a dependable, highly efficient solution in a completely automatic ...

    By Global Pump - a Mersino Company based in Davison, MICHIGAN (USA). from High Performance Trash Pumps (GHT) Product line

  • AutoPump - Model AP4+ - Aggressive Fluids Specialty Pump

    The AutoPump AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life of the pump and to broaden the range of conditions each model can be used in. All nonmetallic internal parts are PVDF*, a high-grade engineering plastic with higher strength at elevated temperatures and extremely broad chemical ...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA). from Aggressive Fluids Specialty Pump Product line

  • M.W. Watermark - Model AFPCS - Automatic Feed Pump Control System

    AFPCS is used in conjunction with air-operated diaphragm (AOD) feed pumps to automatically increase the feed pump pressure during the filtration cycle. High initial feed pump pressures can build a very tightly packed, impermeable layer of solids on the filter cloth, restricting the flow of slurry and ultimately the density of the cake. Reduced ...

    By M.W. Watermark LLC based in Holland, MICHIGAN (USA). from Automatic Feed Pump Control System Product line

  • Thompson - Heavy Duty Trash

    Thompson trash pumps are specified for the really tough jobs where a wet priming pump capable of handling large solids and/or abrasive material is needed. Thompson trash pumps outperform other centrifugal trash pumps on the market and cost less to operate. The quality and dependability engineered into each Thompson heavy duty trash pump provides ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Heavy Duty Trash Product line

  • Vacuum Assisted Dry Prime Series

    Thompson engineers developed a series of high pressure jet pumps that can handle liquids with larger solids and more air than standard end-suction centrifugal pumps. By increasing the impeller size and adding the Super Suction Vacuum-Assisted Priming System, Thompson JSV High Pressure Jet Pumps are able to pass large amounts of solids and able to ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Vacuum Assisted Dry Prime Series Product line

  • Model S-222 A & E Series - Lift Stations

    These units are engineered as a receiving sump for the fast evacuation of solids laden waste streams. These units are situated at the discharge end of the waste generating equipment to rapidly move the waste from the point of generation to a storage/collection area with a minimum of settling out of solids. Each unit is supplied with either an ...

    By Wastewater Engineers, Inc. based in Oxford, MICHIGAN (USA). from Lift Stations Product line

  • Solids Handling Pumps

    Cornell offers a wide range of solids handling pumps, from 1.25” though 30” discharge size, to handle the most difficult waste water applications. Cornell solids handling pumps can be found in a wide range of applications in the Municipal, Agricultural, and Industrial markets; and available in a variety of mounting configurations ...

    By Cornell Pump Company Distributor in MICHIGAN (USA).

  • Premium

    Bright Technologies - Oil & Filter Recycler Base Machine

    Rugged, Reliable Operation Sebright Products/Bright Technologies have over 28 years’ experience manufacturing hydraulic equipment and over 20 years with liquids/solids separation technology. The OFR 4006 Oil & Filter Recycler is a product that exhibits our experience and continuous improvement in these technologies. The Oil & Filter ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Oil & Filter Recycler Base Machine Product line

  • Gorman-Rupp - Model SF Series (Infinity) - Submersible Solids-handling Pumps

    Gorman-Rupp SF Series submersible solids-handling pumps are designed to provide you with the ultimate in pumping performance. All SF Series pumps use NEMA Premium Efficiency motors and pass a minimum 3' spherical solid. Vortex pumps use the patent-pending Staggerwing impeller technology. SF Series submersible solids-handling pumps are available in ...

    By Gorman-Rupp Co. Distributor in MICHIGAN (USA). from Submersible Solids-handling Pumps Product line

  • Submersible Solids Handling Pumps

    Cornell's Submersible pumps maintain superb operating efficiencies and are coupled with premium efficient motors. All come standard with heavy walled volutes for extended life under abrasive service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and Stainless Steel upper and intermediate guide ...

    By Cornell Pump Company Distributor in MICHIGAN (USA).

  • Proactive Environmental - Mobile Groundwater Remediation Systems

    ProAct provides mobile groundwater treatment systems for flow rates ranging from 20 – 5000 gallons per minute. Our treatment systems are designed to treat a variety of contaminants such as Iron (Fe), Solids, Mercury (Hg), Chromium along with other Metals, Organic Compounds, PCB’s, Chlorine, and more. ProAct’s media vessels, built ...

    By ProAct Services Corporation based in Ludington, MICHIGAN (USA). from Mobile Groundwater Remediation Systems Product line

  • Premium

    WesTech CleanFlo™ - MultiRake Bar Screen

    The WesTech MultiRake Screen is a mechanically cleaned screen suitable for inlet works of treatment plants, pumping stations and water inlet structures. The screen captures solid materials which would otherwise be harmful to downstream equipment.

    By WesTech Engineering, Inc. Distributor in Howell, MICHIGAN (USA). from MultiRake Bar Screen Product line

  • Moyno - Model 2000 HS - Large Pumps for High Solids and Sludge Cake Transfer

    The Moyno 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps and open conveyors, the Moyno 2000 HS System requires a much lower capital investment, lower operating costs and less maintenance.

    By Moyno, Inc. Distributor in MICHIGAN (USA). from Large Pumps for High Solids and Sludge Cake Transfer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you