solids pumping equipment in North Carolina

  • Landia - Model type MPG-I - Long Shaft Chopper Pump

    As a unique feature, the long-shaft MPG-I pump has the inlet on top of the pump housing. Together with the fan housing which is mounted on the pump shaft, this means that the MPG-I pump can pump fluids with a substantially higher content of solid material than most other pumps. Perfect for heavily contaminated fluids or fluids with a high content ...

    By Landia a/s Office in Cary, NORTH CAROLINA (USA). from Long Shaft Chopper Pump Product line

  • Sydex - Model G Range - Range Progressing Cavity Hopper Pumps

    Wide-throat progressing cavity pump with auger designed to handle fluids with very high dry solids content. Optimalised hopper and auger design ensure maximum efficiency and reliability. Widely used in conjunction with centrifuge and belt-press. Pumping highly viscous, and solids laden, non-Newtonian fluids is a difficult and complex process. At ...

    By Sydex srl Office in Waxhaw, NORTH CAROLINA (USA).

  • BHS - Turnkey Engineered Packages

    BHS delivers engineered packages for the BHS process filtration solutions. In the “front-end” phase of a project, BHS identifies the filtration technology via lab and pilot plant studies. We scale-up and engineer the complete system including the feed pumps, tanks and transfer pumps, vacuum pumps, compressors, valves and instruments ...

    By BHS-Sonthofen Inc. based in Charlotte, NORTH CAROLINA (USA).

  • Premium

    Flottweg - Model OSE - Decanter Centrifuge

    The Flottweg OSE Decanter. Optimal Sludge Dewatering of Primary and Excess Sludge. The decomposition process in a sewage treatment facility continually generates biological sludge. To ensure a stable decomposition process in the biological cleaning stage, this biological sludge must be removed. The removed biological sludge is called surplus ...

    By Flottweg SE Office in Waxhaw, NORTH CAROLINA (USA).

  • Solids Handling Pumps

    Cornell offers a wide range of solids handling pumps, from 1.25” though 30” discharge size, to handle the most difficult waste water applications. Cornell solids handling pumps can be found in a wide range of applications in the Municipal, Agricultural, and Industrial markets; and available in a variety of mounting configurations ...

    By Cornell Pump Company Distributor in Mocksville, NORTH CAROLINA (USA).

  • Amstar Filter

    The design and development of Amstar plants rely on the decades' old experience of its founders in over 3,000 technical services on all sorts of plants and brands.Amstar machines are made of the thickest steel and weighs at least 20% more. Amstar filter presses work with high-pressure pumps up to 20 bar /40 bar - aggregates.Amstar has proprietary ...

    By American Research Technologies, LLC based in Lake Wylie, NORTH CAROLINA (USA).

  • Oil/Water Separators with Deep Sump Basin

    The Deep Sump Basin (DSB) is a complete packaged system consisting of the  Deep Sump Basin with Integral Grit and Pump Lift Chambers, Influent Pump Package  and Model HTC Rectangular Aboveground Oil/Water Separator. The system is designed  to remove free-floating oil, grease and settleable oily-coated solids from a vehicle  ...

    By Highland Tank & Manufacturing Company, Inc. Office in Greensboro,, NORTH CAROLINA (USA). from Oil/Water Separators with Deep Sump Basin Product line

  • Advanced Filtration Systems

    The Skimoil Overboard Oil Protection System (OOPS) is designed to simply and economically remove oil contamination from the bilge water of boats. The filtered bilge water is discharged without creating environmental damage. The Skimoil System is simply installed between the bilge pump and the overboard through-hull-fitting, similar to installing a ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Advanced Filtration Systems Product line

  • Submersible Solids Handling Pumps

    Cornell's Submersible pumps maintain superb operating efficiencies and are coupled with premium efficient motors. All come standard with heavy walled volutes for extended life under abrasive service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and Stainless Steel upper and intermediate guide ...

    By Cornell Pump Company Distributor in Mocksville, NORTH CAROLINA (USA).

  • Trapzilla - Model TZ-400 - Supercapacity Grease Trap System

    Thermaco Trapzilla TZ-400 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 75 gallons per minute peak flow, 400+ pounds of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for ...

    By Big Dipper—Thermaco based in Asheboro, NORTH CAROLINA (USA). from Supercapacity Grease Trap System Product line

  • Trapzilla - Model TZ-160 - Supercapacity Grease Trap System

    Thermaco Trapzilla TZ-160 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 35 gallons (2.21 l/s) per minute peak flow, 160+ pounds (72.57+ kg) of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, ...

    By Big Dipper—Thermaco based in Asheboro, NORTH CAROLINA (USA). from Supercapacity Grease Trap System Product line

  • Chopper Pumps

    Cornell’s Chopper Pump is ideally suited for chopping Solids. The standard casing, made of ASTM A536 grade 65-45-12 ductile iron, stands up to robust applications. Everything about the pump is built to tackle hard jobs, from the replaceable cutter bar made of T1 tool steel heat treated to a minimum of 60 Rockwell C hardness, to the heat ...

    By Cornell Pump Company Distributor in Mocksville, NORTH CAROLINA (USA).

  • Model RACN - RACNS - Process Pumps for Slurry

    RACN-RACNS series impeller is open type designed with wide cross sections between the blades to pump, without any clogging problems, thick or highly viscous liquids with non-fibrous solid particles, and solutions with high solid content. It is suitable for heavy duty in the paper and cellulose industry (for pulp or stock with up to 10% ...

    By Gardner Denver Distributor in Pineville, NORTH CAROLINA (USA). from Process Pumps for Slurry Product line

  • Agriculture / Dairy Applications

    Jim Vaughan invented the first chopper pump back in 1960, after working on local dairymen's pumps in his repair shop and realizing the need to 'chop' the solids while pumping.

    By Vaughan Company., Inc. Distributor in Charlotte, NORTH CAROLINA (USA). from Agriculture / Dairy Applications Product line

  • Triton - Screw Centrifugal Pumps

    Vaughan Company, with over 50 years of solids handling experience, introduces the Triton® screw centrifugal pumps, combining the benefits of Vaughan’s superior pump designs with the advantages of high efficient, non-clogging performance. The Triton screw centrifugal pump’s open channel impeller is ideal for handling thick sludges, ...

    By Vaughan Company., Inc. Distributor in Charlotte, NORTH CAROLINA (USA). from Screw Centrifugal Pumps Product line

  • WSP - Chop-Flow Pumps

    Created by the same engineers and manufactured side-by-side with the dependable WEMCO pumps, the WSP Chop-Flow pump is just as rugged and dependable. The WSP Model CF Chop-Flow pump chops as it pumps, keeping oversized solids and stringy material from clogging your downstream process.

    By Weir Power & Industrial Distributor in NORTH CAROLINA (USA). from Chop-Flow Pumps Product line

  • Dolmar - Model MP-352.4 - 4-Stroke Water Pump

    Powerful, solid and quiet 4-Stroke engine with few emissions. Ideal for watering gardens and other landscapes where no electric power is available.

    By Dolmar Distributor in Winston-Salem, NORTH CAROLINA (USA). from 4-Stroke Water Pump Product line

  • EBARA - Model DWU, DWXU - Dominator Sewage Pumps

    The EBARA Model DWU “Dominator” sewage pumps are designed for reliable pumping of wastewater with suspended solids up to 2″ in diameter. The EBARA Dominator is superior in dependability and efficiency. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional ...

    By EBARA International Corporation Distributor in NORTH CAROLINA (USA). from Dominator Sewage Pumps Product line

  • Warman - Model Q-Series QCV - Axial Flow Pump

    The Warman Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. The Warman Q-Series Axial Flow Pumps offer high quality and reliability, high efficiencies and low energy consumption for continuous circulation of ...

    By Weir Power & Industrial Distributor in NORTH CAROLINA (USA). from Axial Flow Pump Product line

  • REDI-PRIME - Dry Prime pumps

    Cornell's Redi-Prime® pumps offer the widest range of Dry Prime pumps in the industry—from 1.25' though 30' discharge size. Virtually all of Cornell's Solids Handling and Clear Liquids handling centrifugal pumps can be fitted with the Redi-Prime® system. The pump of choice for rental companies and OEM's around the world, you'll find ...

    By Cornell Pump Company Distributor in Mocksville, NORTH CAROLINA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you