solids pumping equipment in Oklahoma

  • SHD - Solids Handling Pump

    The Ruhrpumpen Type SHD pump is a vertical or horizontal pump for solid handling. The vertically mounted pump that has a structurally sufficient base to support the pump, motor and accessories and the horizontally mounted pump is mounted on a common base plate with the driver. With a single impeller with a suction non-clog design and a single ...

    By RUHRPUMPEN GmbH Office in Tulsa, OKLAHOMA (USA). from SHD - Solids Handling Pump Product line

  • Electric Submersible Pumps

    Ideal Usage: Removing water and handling solids up to 3.15' when electric power source is available.

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Electric Submersible Pumps Product line

  • STT - Submersible Pump

    The Ruhrpumpen Type STT is a submersible pump with non-clogging and non-stringing two-channel impeller in pot design for vertical wet-pit or dry-pit installation and universal use, suitable for pumping sewage with coarse solid matter and fibrous content without upstream screen.

    By RUHRPUMPEN GmbH Office in Tulsa, OKLAHOMA (USA). from STT - Submersible Pump Product line

  • Red Lion - Heavy-Duty Cast Iron Effluent Pump

    Ideal for liquid effluent pumping applications, as well as light commercial applications with up to 11/16' diameter solids.

    By Red Lion based in Oklahoma City, OKLAHOMA (USA). from Heavy-Duty Cast Iron Effluent Pump Product line

  • ST - Two Chanel Impeller Centrifugal Pump

    The Ruhrpumpen Type ST is a horizontal centrifugal pump with non-clogging and non-stringing two-channel impeller in pot design for dry installation and universal use, suitable for pumping sewage with coarse solid matter and fibrous content without upstream screen.

    By RUHRPUMPEN GmbH Office in Tulsa, OKLAHOMA (USA). from ST - Two Chanel Impeller Centrifugal Pump Product line

  • STV - Two Chanel Impeller Centrifugal Pump

    The Ruhrpumpen type STV is a vertical centrifugal pump with non-clogging and non-stringing two-channel impeller in pot design for dry installation and universal use, suitable for pumping sewage with coarse solid matter and fibrous content without upstream screen.

    By RUHRPUMPEN GmbH Office in Tulsa, OKLAHOMA (USA). from STV - Two Chanel Impeller Centrifugal Pump Product line

  • Excavation

    The diagram below shows a water treatment system in which contaminated groundwater at a construction site can be pumped away from the site and cleaned. Once the solid contaminants are filtered out, the clean effluent is then suitable for discharge to a municipal storm drain system or elsewhere.

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Excavation Product line

  • Connectra - Model 414 - Hand-Powered (HP) Butt Fusion Machine

    Think solid. Simple and durable, the 414HP's hydraulic system is powered by an easy-to-maintain hand pump and pressure gauge. Its sturdy rectangular frame design provides a rigid and safe fusion platform. Like all Connectra machines it is easy to learn and operate, and you can expect low maintenance costs and a superior return on your investment.

    By Georg Fischer Connectra, LLC based in Shawnee, OKLAHOMA (USA).

  • Model CA-2403-0MHB - Cold Water Gasoline Direct Drive

    Pump: Direct drive triplex piston AR pump with ceramic plungers · Stainless-steel and brass unloader · Adjustable pressure · Forged brass manifold · Thermal relief valve ·  In-line water strainerEngine: Performance-proven Honda OHV engine with low-oil protectionFrame: Light, corrosion resistance aluminum ...

    By Chappell Supply & Equipment Co. based in Oklahoma, OKLAHOMA (USA). from Cold Water Gasoline Direct Drive Product line

  • Juggler - Solid/Liquid Separator

    The Juggler™ is a unique, patented pumping and liquid-solid separating system that services grease traps and septic tanks, with no chemicals. This unit returns a liquid that is 99.98% free of solids, without affecting the bacterial flora.

    By Labrie Enviroquip Group Distributor in Oklahoma City, OKLAHOMA (USA).

  • Marsh Funnel

    Viscosity is a measurement of a fluids resistance to flow: the greater the resistance, the higher the viscosity. As measured by the Marsh Funnel, the viscosity of the fluid in question is influence by the density of the fluid (solids content) and gelation rate (beneficiated solids content). The viscosity of the drilling fluid in use should be ...

    By Wyo-Ben, Inc. Distributor in Edmond, OKLAHOMA (USA). from Marsh Funnel Product line

  • Model TD-16 - Coated Granular Bentonite Grouting Material

    TD-16 is a one-step coated granular bentonite grouting material designed to achieve low permeability seals in water wells, geotechnical borings, and heat pump applications. TD-16 achieves a range of solids contents, 16% to 20% solids by weight. TD-16’s granular nature reduces dusty conditions during mixing operations and slurry loss to the ...

    By Wyo-Ben, Inc. Distributor in Edmond, OKLAHOMA (USA). from Coated Granular Bentonite Grouting Material Product line

  • Model GROUT-WELL AND GROUT-WELL DF - Bentonite Grouting Material

    GROUT-WELL and GROUT-WELL DF are one step bentonite grouting materials designed to achieve low permeability seals in water wells, monitor wells, geotechnical borings, and heat pump holes. GROUT-WELL and GROUT-WELL DF achieve a range of solids contents, 17% to 20% solids by weight. GROUT-WELL DF’s granular nature reduces nuisance dust during ...

    By Wyo-Ben, Inc. Distributor in Edmond, OKLAHOMA (USA). from Bentonite Grouting Material Product line

  • Sand Cone

    Cuttings or solids held in suspension in drilling mud significantly influence the life of pumps, swivels, and hoses. These abrasive particles can be removed by using a sand cone (desander) working in conjunction with good drilling mud characteristics. Mud mixed to a Marsh Funnel viscosity of 34 to 36 seconds can carry cuttings from the hole.

    By Wyo-Ben, Inc. Distributor in Edmond, OKLAHOMA (USA). from Sand Cone Product line

  • Model G-150 - GUAR Drilling Polymer For Irrigation, Core and Seismic Shot Hole Drilling

    G-150 GUAR is a guar-based drilling polymer for irrigation, core and seismic shot hole drilling. G-150 GUAR is a cost effective natural polymer suitable for a wide range of drilling applications. The ability of G-150 GUAR to dissolve and yield viscosity quickly producing a low solids mud system is advantageous. It gives fast cuttings removal, high ...

    By Wyo-Ben, Inc. Distributor in Edmond, OKLAHOMA (USA). from GUAR Drilling Polymer For Irrigation, Core and Seismic Shot Hole Drilling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you