solids pumping equipment in Oregon

  • Solids Handling Pumps

    Cornell offers a wide range of solids handling pumps, from 1.25” though 30” discharge size, to handle the most difficult waste water applications. Cornell solids handling pumps can be found in a wide range of applications in the Municipal, Agricultural, and Industrial markets; and available in a variety of mounting configurations ...

    By Cornell Pump Company based in Clackamas, OREGON (USA).

  • Submersible Solids Handling Pumps

    Cornell's Submersible pumps maintain superb operating efficiencies and are coupled with premium efficient motors. All come standard with heavy walled volutes for extended life under abrasive service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and Stainless Steel upper and intermediate guide ...

    By Cornell Pump Company based in Clackamas, OREGON (USA).

  • BEKA HAMAX - Model 1 - Universal Breaker Lubrication System for All Kinds of Lubricant

    The Universal Breaker Lubrication System for All Kinds of Lubricant. Advantages: The solution for small and medium breakers. Installation directly at the breaker equals the ideal solution for interchangeable attachments. Also suitable for lubricants with solids. Adjustable delivery rate. Activation by impulse - therefore suitable for applications ...

  • Model P3O87 - Self-Priming Centrifugal Trash Pumps

    With up to 2.75 inch solids handling capability. These pumps offer unrivalled reliability through the use of high quality ductile iron castings and 17-4PH stainless steel shafts. Bare shaft, frame mounted, self-priming, heavy duty,solids handling pump

  • Electric Submersible Pumps

    Ideal Usage: Removing water and handling solids up to 3.15' when electric power source is available.

    By BakerCorp Office in Portland, OREGON (USA). from Electric Submersible Pumps Product line

  • Prime - Model PP44S8 - End Suction Centrifugal Pump

    The PP44S8 is a high flow, ruggedized pump designed to operate over a broad range of performance while delivering outstanding suction lift. The rugged construction and modular design provide proven reliability and flexibility in the most demanding applications. Bare Shaft, Frame Mounted, Fully Automatic Dry Priming, Vacuum Assisted, Run Dry, Heavy ...

    By Pioneer Pump - Franklin Electric Co., Inc. based in Canby, OREGON (USA). from End Suction Centrifugal Pump Product line

  • Chopper Pumps

    Cornell’s Chopper Pump is ideally suited for chopping Solids. The standard casing, made of ASTM A536 grade 65-45-12 ductile iron, stands up to robust applications. Everything about the pump is built to tackle hard jobs, from the replaceable cutter bar made of T1 tool steel heat treated to a minimum of 60 Rockwell C hardness, to the heat ...

    By Cornell Pump Company based in Clackamas, OREGON (USA).

  • Mitchell - Wastewater Pumps

    An unfortunate bi-product of the production process; it can be corrosive, abrasive or anything in-between, and now we need to move it.  Mitchell Lewis & Staver has the pumps you need to get this stuff to the treatment plant, or off site.  Submersibles, self-primers and vertical sump pumps are just a few of the types of pumps we can ...

    By Mitchell Lewis & Staver Company based in Wilsonville, OREGON (USA). from Wastewater Pumps Product line

  • Model ES3O87 - End Suction Centrifugal Pump

    With up to 2.5 inch solids handling capability. These pumps offer unrivalled reliability through the use of high quality ductile iron castings and 17-4PH stainless steel shafts.

    By Pioneer Pump - Franklin Electric Co., Inc. based in Canby, OREGON (USA). from End Suction Centrifugal Pump Product line

  • REDI-PRIME - Dry Prime pumps

    Cornell's Redi-Prime® pumps offer the widest range of Dry Prime pumps in the industry—from 1.25' though 30' discharge size. Virtually all of Cornell's Solids Handling and Clear Liquids handling centrifugal pumps can be fitted with the Redi-Prime® system. The pump of choice for rental companies and OEM's around the world, you'll find ...

    By Cornell Pump Company based in Clackamas, OREGON (USA).

  • Dissolved Air Flotation Pumps (DAF)

    Dissolved Air Flotation (or D.A.F.) is a process in which tiny air molecules bind themselves to Solids particles and then float to the surface of a holding tank, allowing the Solids to be skimmed from the surface. Through the combination Cornell's patented Cycloseal® and an innovative impeller design, the Cornell D.A.F. pump is able to create ...

    By Cornell Pump Company based in Clackamas, OREGON (USA).

  • Excavation

    The diagram below shows a water treatment system in which contaminated groundwater at a construction site can be pumped away from the site and cleaned. Once the solid contaminants are filtered out, the clean effluent is then suitable for discharge to a municipal storm drain system or elsewhere.

    By BakerCorp Office in Portland, OREGON (USA). from Excavation Product line

  • Effluent Sewer Collection System

    How Effluent Sewers Work:With an Orenco Effluent Sewer, raw sewage flows from the house or business to a watertight underground tank. Only the filtered liquid portion is discharged (by either pump or gravity) to shallow, small-diameter collection lines that follow the contour of the land. Solids remain in the underground tank for passive, ...

    By Orenco Systems Inc. based in Sutherlin, OREGON (USA).

  • Model BGDC - Control System

    SEEPEX control system “BGDC” offers an integral metering, mixing and conveying system specifically for generating of biogas. Digestate and substrates are metered in adjustable proportions in the hopper of the SEEPEX pump. Level controls ensure the solids input is optimally mixed with the digestate with the patented “BTH” ...

    By seepex Gmbh Office in Clackamas, OREGON (USA). from Control System Product line

  • Astoria - Model 2 - Automated Wet Chemistry Analyzers

    Price was the primary influence in the development of this system: not everyone needs the four to six detectors of an Astoria Analyzer, and there are several laboratories with PQLs that discrete analyzers can’t hit. The two (2) channel Astoria2–having combined the pump, cartridge base and detector modules of the Astoria into one solid ...

    By Astoria-Pacific, Inc. based in Clackamas, OREGON (USA). from Automated Wet Chemistry Analyzers Product line

  • Oil/Water Separator - Slant Rib Coalescing Oil/Water Separator (SRC) & Fiberglass Tank Oil/Water Separator (SRM)

    Parkson’s Model SRC and SRM Oil/Water Separators offer a reliable, compact, and economical solution to a wide array of oil/water separation applications. The Oil/Water Separators remove free, non-emulsified oil and settleable solids to produce an effluent with less than 10 mg/l of oil droplets 20 micron or larger.The influent flow first enters an ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you