solids pumping equipment in Texas

  • Self-Priming, Solids Handling Centrifugal Pumps

    With over 25 years of experience in designing and manufacturing reliable solids control equipment for the oil & gas industry, Elgin recognizes the need for reliable and efficient self-priming pumps.  Elgin’s line of self-priming, solids-handling pumps have been designed to reliably handle a myriad of solids-laden fluids with minimal ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Self-Priming, Solids Handling Centrifugal Pumps Product line

  • Submersible Feed Pump

    With over 25 years of experience in designing and manufacturing reliable solids control equipment for the oil & gas industry, Elgin recognizes the need for reliable and efficient submersible feed pumps.  Elgin’s line of solids-handling pumps have been designed to reliably handle a myriad of solids-laden fluids with minimal ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Submersible Feed Pump Product line

  • Model UT - 1-phase / 3-phase / 50Hz - Sewage Pumps

    The UT pump features a vortex (eddy flow) structure and wide pump casing interior, preventing clogging by waste and solid matter.

    By Tsurumi Pumps Office in El Paso, TEXAS (USA). from Sewage Pumps Product line

  • Model TITAN series - Submersible Pumps

    Submersible pumps in the TITAN series, designed to pump water containing mud, sand, clay and other abrasive materials. BLACK SERIES Black pumps are ideal for pumping liquids with solids in suspension and in civil and industrial sewage plants.

    By Gilbert Gilkes & Gordon Ltd Office in Kemah, TEXAS (USA). from Submersible Pumps Product line

  • Model 3/8 Inch - Drum Pump

    Reliable polypropylene air center section combined with non-metallic clamped casing materials ensure maximum chemical compatibility. Our patented Max-Pass valve system allows operation under a variety of conditions, ranging from clean fluids to slurries, to solids applications.

    By Delta Rigging & Tools, Inc. based in Pearland, TEXAS (USA). from Drum Pump Product line

  • Model 1/4 Inch T025 - PTFE Pumps

    Housing machined from solid PTFE block. High density polyethylene center section. Suction and discharge ports are 180° rotation adjustable front to back. Vibration pads standard on all pumps. No metal in contact with liquid. Lubrication free operation. Temperatures up to 248°F (120°C)

    By Delta Rigging & Tools, Inc. based in Pearland, TEXAS (USA). from PTFE Pumps Product line

  • Model 3/8 Inch P038 - Polyethylene Pumps

    Housing machined from solid PTFE block. High density polyethylene center section. Suction and discharge ports are 180° rotation adjustable front to back. Vibration pads standard on all pumps. No metal in contact with liquid. Lubrication free operation. Temperatures up to 158°F (70°C).

    By Delta Rigging & Tools, Inc. based in Pearland, TEXAS (USA). from Polyethylene Pumps Product line

  • Electric Submersible Pumps

    Ideal Usage: Removing water and handling solids up to 3.15' when electric power source is available.

    By BakerCorp Office in Borger, TEXAS (USA). from Electric Submersible Pumps Product line

  • ParkUSA - Grinder Pump

    A grinder pump is a high-powered pump fitted with sharp cutters to shred solids and move them under high pressure usually in a relatively small diameter pipe. Grinder pumps are most commonly used for lower flows and high pressure or higher head applications. A common application where a grinder pump is used is when pumping into a pressure sewer ...

    By ParkUSA based in Houston, TEXAS (USA). from Grinder Pump Product line

  • Chopper Pumps

    Cornell’s Chopper Pump is ideally suited for chopping Solids. The standard casing, made of ASTM A536 grade 65-45-12 ductile iron, stands up to robust applications. Everything about the pump is built to tackle hard jobs, from the replaceable cutter bar made of T1 tool steel heat treated to a minimum of 60 Rockwell C hardness, to the heat treated ...

    By Barco Pump based in Wylie, TEXAS (USA).

  • Griffin - Trash Pumps

    Griffin's Self Priming Trash Pumps are available in 4' and 6' models standard that do not require additional priming systems. These pumps are wet-priming portable pumps. They operate efficiently under intermittent flow conditions. These pumps are capable of handling high flows and head conditions exceeding 125 ft. The pump includes a suction ...

    By Griffin Dewatering Corporation based in Houston, TEXAS (USA). from Trash Pumps Product line

  • Model AFG Series - Agitator Pumps

    The AFG Series contains the following features: Offering the highest in quality and performance with an international standard design. Harden and abrasion resistant impeller with a 30~33 HRC Hardness. Abrasion resistant Chrome steel wear ring equipped for model AF-610/615. Equipped with a harden ductile iron agitator with a ...

    By HCP Pumps America, Inc Office in McKinney, TEXAS (USA). from Agitator Pumps Product line

  • Dragon - Model 118 Series - Centrifugal Pump

    Whether you need centrifugal pumps or heavy-duty pumps for handling solid waste and trash, Dragon has you covered. We carry a full line of pumps that can run on a variety of fuels – electric, diesel, or natural gas. Dragon will also help you select the right pump with the right pressure to insure you don’t incur extra horsepower ...

    By Dragon Products, Ltd - Modern Group LTD based in La Porte, TEXAS (USA). from Centrifugal Pump Product line

  • Vossche - Model WQ(D) - Submersible Sewage Pump

    Our machine is widely applied in many fields, such as industry, agriculture, mine, building construction, environment protection, etc. Liquids that contain mud, sand, short fiber, paper scrap and other solid particles as well as soft solids are applicable, for example, mud water, grey water, sewage, excrement, domestic wastewater, etc.

    By Vossche based in Dallas, TEXAS (USA). from Submersible Sewage Pump Product line

  • Model BBA B Series - Self Priming Centrifugal Pumps

    Long life self-priming pumps for handling a wide range of liquids containing solids and abrasives.

    By Gilbert Gilkes & Gordon Ltd Office in Kemah, TEXAS (USA). from Self Priming Centrifugal Pumps Product line

  • Tsurumi - Model PN Series - Sewage and Wastewater Pumps

    The main components of the PN Pump are made of 304 stainless-steel and composite resin materials, making this an ultra-lightweight pump. Suitable for effluent applications where large solids are not likely to exist. Automatic and auto-alternating versions are available in all sizes.

    By Tsurumi Pumps Office in El Paso, TEXAS (USA). from Sewage and Wastewater Pumps Product line

  • Hiller - Model DP - Decapac Skid Mounted High Solids Centrifuge System

    The Decapac features a complete dewatering system including centrifuge, feed pump, polymer system, all in one skid mounted package.

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • Pinnacle-Flo - Model PU Series - Self-Priming Centrifugal Pump

    Self-priming centrifugal, limited solids-handling, high efficiency pumps with reprime capability, and advanced design and maintenance features

    By Pinnacle-Flo, Inc. based in Houston, TEXAS (USA). from Self-Priming Centrifugal Pump Product line

  • Model Ultra V Series - Self-Priming Pumps

    The Gorman-Rupp Ultra V Series® with UltraMate® pump is specifically designed for handling solids and slurries.  They have significantly higher head capabilities than Super T Series® and 10 Series® pumps.  If a clog occurs, it can be removed easily through the coverplate opening without disturbing piping or using any special tools.

    By Barco Pump based in Wylie, TEXAS (USA).

  • MXQ, LLC. - Progressive Cavity Pumps

    MXQ progressive cavity pumps are self-priming, positive displacement pumps. They consist of two elements: the rotating helical rotor and the stationary stator. The rotor conveys the medium with low pulsation and vibration through the stator. MXQ progressive cavity pumps are suitable for all sectors of industry for pumping and dosing thin to ...

    By MXQ, LLC. based in TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you