solids pumping equipment in West Virginia

  • Self-Priming, Solids Handling Centrifugal Pumps

    With over 25 years of experience in designing and manufacturing reliable solids control equipment for the oil & gas industry, Elgin recognizes the need for reliable and efficient self-priming pumps.  Elgin’s line of self-priming, solids-handling pumps have been designed to reliably handle a myriad of solids-laden fluids with minimal ...

    By Elgin Separation Solutions Office in St. Albans, WEST VIRGINIA (USA). from Self-Priming, Solids Handling Centrifugal Pumps Product line

  • Submersible Feed Pump

    With over 25 years of experience in designing and manufacturing reliable solids control equipment for the oil & gas industry, Elgin recognizes the need for reliable and efficient submersible feed pumps.  Elgin’s line of solids-handling pumps have been designed to reliably handle a myriad of solids-laden fluids with minimal ...

    By Elgin Separation Solutions Office in St. Albans, WEST VIRGINIA (USA). from Submersible Feed Pump Product line

  • Elgin - Model KEMTRON 1500HD2 - Packaged Mud Recycling System

    The KEMTRON 1500HD2 is the flagship product in Elgin's trenchless line of packaged mud recycling / cleaning systems. By boasting an impressive 1,500 gallons per minute (95 lps) cleaning capacity, this unit is designed to handle high solids and high viscosity drilling fluid recycling requirements. The KEMTRON 1500HD2 features a 9,000 gallon (34,000 ...

    By Elgin Separation Solutions Office in St. Albans, WEST VIRGINIA (USA). from Packaged Mud Recycling System Product line

  • Elgin - Model 1500DT - Dredge Dewatering System

    The Elgin 1500DT is the flagship product in Elgin's  line of mobile dredge dewatering systems.  By boasting an impressive 2,000 gallons per minute (95 lps) cleaning capacity, this unit is designed to handle high solids and high viscosity drilling fluid recycling requirements.  The Elgin 1500DT features a 9,000 gallon (34,000 liters) ...

    By Elgin Separation Solutions Office in St. Albans, WEST VIRGINIA (USA). from Dredge Dewatering System Product line

  • Premium

    PISTA TURBO™ - Grit Pump

    Smith & Loveless’ rugged PISTA Turbo Grit Pump is the only pump in the industry exclusively designed for pumping grit separated from sewage. The PISTA Turbo Grit Pump is available in both top-mounted vacuum-primed and remote-mounted flooded-suction configurations. Equipped with a Ni-Hard volute and Ni-Hard recessed impeller mounted ...

    By Smith & Loveless Inc. Distributor in WEST VIRGINIA (USA). from Grit Pump Product line

  • Premium

    S&L STAR ONE™ - Vacuum Prime Pump

    Our vertical, close-coupled STAR ONE™ S&L Non-Clog Pump design meets the highest of standards that promote superior efficiency, durability and ease of maintenance, including the 10 States Standard for 3” (76 mm) solids. Its rugged design, featuring exclusive oversized, stainless steel pump shafts and bearings, will typically ...

    By Smith & Loveless Inc. Distributor in WEST VIRGINIA (USA). from Vacuum Prime Pump Product line

  • Deming - Demersible Solids Handling Non-Clog Pump

    Deming Demersible Solids Handling Non-Clog pumps are used in industrial wastewater applications and have a 4' spherical solids handling capability to easily pass the solids encountered in most industrial environments. Deming Demersible flows to over 4,000 GPM and heads in excess of 265 feet. Deming Demersible Series is designed for continuous ...

    By Crane Pump & Systems Distributor in WEST VIRGINIA (USA). from Demersible Solids Handling Non-Clog Pump Product line

  • Premium

    Flottweg - Model OSE - Decanter Centrifuge

    The Flottweg OSE Decanter. Optimal Sludge Dewatering of Primary and Excess Sludge. The decomposition process in a sewage treatment facility continually generates biological sludge. To ensure a stable decomposition process in the biological cleaning stage, this biological sludge must be removed. The removed biological sludge is called surplus ...

    By Flottweg SE Distributor in WEST VIRGINIA (USA).

  • Model RACN - RACNS - Process Pumps for Slurry

    RACN-RACNS series impeller is open type designed with wide cross sections between the blades to pump, without any clogging problems, thick or highly viscous liquids with non-fibrous solid particles, and solutions with high solid content. It is suitable for heavy duty in the paper and cellulose industry (for pulp or stock with up to 10% ...

    By Gardner Denver Distributor in Cedarburg, WEST VIRGINIA (USA). from Process Pumps for Slurry Product line

  • Model 1910XA - Stainless Steel Sump Pump

    1910XA Cascade series sump pumps are industrial units of heavy duty construction and furnished with suction strainer. Pump units will pass any solids that pass through the suction strainer openings. This series is constructed for installation in wet pits and will drain any area that must be kept dry and is below sewer level. Typical installations ...

    By Swaby Manufacturing Company Distributor in WEST VIRGINIA (USA). from Stainless Steel Sump Pump Product line

  • Deming - Non- Clog Vertical Column Sump Pumps

    Deming Non- Clog Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation.

    By Crane Pump & Systems Distributor in WEST VIRGINIA (USA). from Non- Clog Vertical Column Sump Pumps Product line

  • Weinman - Non- Clog Vertical Column Sump Pumps

    Weinman Non- Clog Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation.

    By Crane Pump & Systems Distributor in WEST VIRGINIA (USA). from Non- Clog Vertical Column Sump Pumps Product line

  • Model 1910XA - Stainless Steel Vertical Sump Pump

    Bulletin 1910XA Cascade series sump pumps are industrial units of heavy duty construction and furnished with suction strainer. Pump units will pass any solids that pass through the suction strainer openings. This series is constructed for installation in wet pits and will drain any area that must be kept dry and is below sewer level. Typical ...

    By Swaby Manufacturing Company Distributor in WEST VIRGINIA (USA). from Stainless Steel Vertical Sump Pump Product line

  • Model 5200X - Non-Clog Ejector

    Major series screenless, wet basin vertical pump units. For pumping liquids containing solids. Unscreened sewage-industrial by-products-wastes-beet pulp-paper-storm water-food solids-tannery wastes. Capacities 50 to 2000 GPM. Also available in duplex arrangement with complete liquid level control, alternator and high water alarm. Can be furnished ...

    By Swaby Manufacturing Company Distributor in WEST VIRGINIA (USA). from Non-Clog Ejector Product line

  • Effluent Sewer Collection System

    How Effluent Sewers Work:With an Orenco Effluent Sewer, raw sewage flows from the house or business to a watertight underground tank. Only the filtered liquid portion is discharged (by either pump or gravity) to shallow, small-diameter collection lines that follow the contour of the land. Solids remain in the underground tank for passive, ...

    By Orenco Systems Inc. Distributor in WEST VIRGINIA (USA).

  • Model 5500 - Submersible Non-Clog Ejector

    Submersible, screenless, non-clog pump units. For the pumping of liquids containing solids. Unscreened sewage-wastes-paper pulp-food solids-industrial by-products-beet pulp-stormwater-tannery wastes. Motor is sealed to run completely under water and is furnished with stainless steel shaft, double mechanical shaft seals housed in filled chamber. ...

    By Swaby Manufacturing Company Distributor in WEST VIRGINIA (USA). from Submersible Non-Clog Ejector Product line

  • Model 5500 - Submersible Non-Clog Ejector

    Submersible, screenless, non-clog pump units. For the pumping of liquids containing solids. Unscreened sewage-wastes-paper pulp-food solids-industrial by-products-beet pulp-stormwater-tannery wastes. Motor is sealed to run completely under water and is furnished with stainless steel shaft, double mechanical shaft seals housed in filled chamber. ...

    By Swaby Manufacturing Company Distributor in WEST VIRGINIA (USA). from Submersible Non-Clog Ejector Product line

  • Model 4200 - Non-Clog Ejector

    4200 Olympic series are non-clog screenless, pump units arranged for installation in wet basins. It is for liquids containing solids on all applications within its range. It was designed for these numerous intermediate installations where extremely heavy duty, such as encountered by our 5200X Major series, is not required. Units are available in ...

    By Swaby Manufacturing Company Distributor in WEST VIRGINIA (USA). from Non-Clog Ejector Product line

  • HexAir

    EDI HexAir™ diffuser is ideally suited when continuous online performance and low-maintenance cost are a must. This includes flow conveyance channels, pump wet wells, and single-reactor applications. The system features a rod-thru design allowing all in-basin piping and diffuser elements to be mechanically cleaned should an obstruction ...

    By Environmental Dynamics International (EDI) Distributor in WEST VIRGINIA (USA). from HexAir Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you