solvent separation Equipment

467 Results found
Only show results in Virginia?
OK
  • Keyword: solvent separation ×

Solvent Recovery, Distillation, Separation and Purification

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

B&W MEGTEC provides complete systems for liquid solvent separation and purification. Water soluble solvents and multiple solvent mixtures may need to be separated from the water and/or separated into their individual components prior to reuse. B&W MEGTEC offers complete extractive and azeotropic multicomponent distillation systems for the ...

LiChrosolv solvents - high-perfomance solvents for HPLC and LC-MS

by Merck Millipore     based in Darmstadt, GERMANY

For analytical HPLC, Merck Millipore provides LiChrosolv® solvents in 'isocratic grade' and 'gradient grade'. Gradient grade LiChrosolv® solvents enable you to minimize the gradient effect of the solvent involved (for example in enantiomeric separations on chiral phases) and are suitable for UPLC and UHPLC: Minimal baseline noise, Low ...

Alliance HPLC System - HPLC has never looked better...

by Waters Corporation     based in Milford, MASSACHUSETTS (USA)

- Time-tested, flexible, and reliable workhorse for your HPLC separations- New industrial design, exemplifying Waters' continued commitment to our industry-trusted HPLC line- Bridge the gap between HPLC and UPLC performance with XP 2.5 µm columns- Integrated solvent and sample management to ensure consistent system-to-system performance and high ...

ACQUITY - UPLC M-Class System

by Waters Corporation     based in Milford, MASSACHUSETTS (USA)

Let your LC inlet do the work for your Nano- to Microscale separations. System of choice for sample-limited applications in proteomics and biomarker discovery, Higher sensitivity for any MS, Maximum amount of data from any sample, Less sample preparation volume and cost, Reduced solvent consumption, Increased dynamic range, Flexible configurations ...

ACQUITY - Model Arc - Quaternary-Based, Modern LC System

by Waters Corporation     based in Milford, MASSACHUSETTS (USA)

HPLC and UHPLC method compatibility at the flip of a switch. The ACQUITY Arc System is a quaternary-based, modern LC system for scientists working with established methods who are looking for the versatility and robustness required to bridge the gap between HPLC and UPLC while continuing to support validated assays.

ACQUITY - Model UPLC - H-Class System

by Waters Corporation     based in Milford, MASSACHUSETTS (USA)

Highest resolution of any quaternary LC system: Improve your laboratory’s efficiency by scaling your methods to UPLC Technology. Use UPLC’s unmatched resolution to get better characterization of your complex samples. Take advantage of tools that simplify and streamline your method development workflow. Future-proof your lab by running ...

SpeedExtractor - Model E-914/E-916 - Pressurized Solvent Extraction Laboratory Instrument

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

The SpeedExtractor is your best solution for fast Pressurized Solvent Extraction (PSE). Increase productivity by processing up to 6 samples in parallel. Streamline the workflow of your sample preparation thanks to ease of sample loading and ready-to-use extract collection.

Prepsolv - Solvents optimized for preparative Chromatography

by Merck Millipore     based in Darmstadt, GERMANY

Prepsolv® solvents are tailored to the requirements of preparative HPLC to facilitate scale-up from analytical to preparative separations. - Extremely low evaporation residue (< 1 mg/l) - Low water content - Optimal protection for columns Prepsolv® solvents for large-scale application are supplied in returnable stainless steel barrels, ...

Applied Separations - Model Spe-ed SFE Basic - Entry Level SCF System

by Applied Separations     based in Allentown, PENNSYLVANIA (USA)

The Spe-ed SFE Basic is the base SFE in our series of instruments for supercritical fluid processes. This no-frills machine satisfies the rigorous needs of research in the lab with a price tag that allows everyone to take advantage of the benefits of Supercritical fluids. It is safe, simple to operate, fast and affordable, with features found in ...

Model RB Solvent Series - Rotary Basket

by Cleaning Technologies Group, LLC     based in Cincinnati, OHIO (USA)

RB Solvent Series hermetically sealed solvent degreasing SFK Series machines - cleaning with non-halogenated solvents like Class III A hydrocarbons, are equipped with following standard features:

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

PSS - Model SDV - Gel Permeation Chromatography (GPC) / Size Exclusion Chromatography (SEC) Columns Soluble in Organic Solvents

by Polymer Standards Service-USA Inc.     based in Mainz, GERMANY

Applicability : Poly(styrene), Poly(vinyl chloride), Poly(carbonate), Elastomers, Resins and others. Eluents: THF, Toluene, TCM, DCM. Material : Styrene-divinylbenzene copolymer network. Maximum Pressure: 45 - 150 bar (650 - 2180 psi), depending on porosity. Maximum Temperature: 100° C. Maximum Flow Rate : 3 ml/min (I.D.: 8 mm, 5 µm ...

Evaporators

by PESCO-BEAM Environmental Solutions, Inc.     based in Roanoke, VIRGINIA (USA)

PESCO-BEAM designs and builds skid mounted evaporation systems. Our evaporators are made to separate high solid material or viscous solvents and oils from recoverable products. Our systems incorporate thin film, wiped film or forced circulation evaporators, multi stage vacuum systems, and a variety of steel components. Our units can be customized ...

PSS - Model PFG - Gel Permeation Chromatography (GPC) / Size Exclusion Chromatography (SEC) Columns Soluble in Organic Solvents

by Polymer Standards Service-USA Inc.     based in Mainz, GERMANY

Applicability : Crystalline polymers, Polyesters, Nylons, Poly(lactide), POM, etc. Eluents : HFIP, TFE, other fluorinated solvents. Material : Modified silica. Maximum Pressure : 150 - 200 bar (2180-2900 psi), depending on porosity. Maximum Temperature : 90° C. Maximum Flow Rate : 3 ml/min (I.D.: 8 mm). Particle Size : 5 µm, 7 µm. ...

PSS - Model PolarSil - Gel Permeation Chromatography (GPC) / Size Exclusion Chromatography (SEC) Columns Soluble in Organic Solvents

by Polymer Standards Service-USA Inc.     based in Mainz, GERMANY

Applicability : Polyurethane, Polyimide, Starches, Celluloses, certain Polyamide, other polar polymers. Eluents: DMF, DMAc, NMP, DMSO. Material : Polyester copolymer network. Maximum Pressure: 50 -120 bar (725 - 1740 psi), depending on porosity. Maximum Temperature : 90° C. Maximum Flow Rate: 2 ml/min (I.D.: 8 mm). Particle Size: 10 µm. ...

Distillation Systems

by PESCO-BEAM Environmental Solutions, Inc.     based in Roanoke, VIRGINIA (USA)

PESCO-BEAM's owners and staff have two decades of experience designing, building, modifying and operating a variety of distillation systems.

PSS - Model GRAM - Columns for Polar Polymers in Medium Polar Organic Solvents

by Polymer Standards Service-USA Inc.     based in Mainz, GERMANY

Applicability : Polyurethane, Polyimide, Starches, Celluloses, certain Polyamide, other polar polymers. Eluents: DMF, DMAc, NMP, DMSO. Material : Polyester copolymer network. Maximum Pressure: 50 -120 bar (725 - 1740 psi), depending on porosity. Maximum Temperature : 90° C. Maximum Flow Rate: 2 ml/min (I.D.: 8 mm). Particle Size: 10 µm. ...

PSS - Model PROTEEMA - Gel Permeation Chromatography (GPC) / Size Exclusion Chromatography (SEC) Columns Soluble in Aqueous Solvents

by Polymer Standards Service-USA Inc.     based in Mainz, GERMANY

Applicability : Natural and synthetic Proteins, Peptides, Enzymes, Gelatins/Collagens. Eluents : Water, water with salt/buffer; pH: 2 -9. Material : Special modified silica. Maximum Pressure: 150 - 200 bar (2180 - 2900 psi), depending on porosity. Maximum Temperature: 70° C. Maximum Flow Rate: (8 mm I.D.) 3 ml/min. Particle Size : 3 µm, ...

Model OES 200 - 52.8 GAL./200L - Solvent Recyclers

by Oregon Environmental Systems     based in North Plains, OREGON (USA)

These recycker models are particularly suitable for companies, having a considerable solvent consumption and they are manufactured according to the Class / Division / Group D rules. The working cycle is completely automatic and is driven by a 8 bit Microprocessor equipped with digital display carrying out diagnostic/alarm function and advising ...

Model S60A and D60A - Solvent Recycling Systems

by Solutex Ltd.     based in Ellesmere, UNITED KINGDOM

The Professional S60 for non flammable solvents and the D60 for flammable solvents. The Professional series features a two stage distillation cycle so that residues can be dried. They can also be equipped with various options including automatic loading and unloading systems for greater automation. A load capacity of 60 litres and available in 4 ...

Need help finding the right suppliers?

Let the XPRTs do the work for you