sonic anemometer Equipment

50 Results found
Only show results available in Virginia?
OK
  • Keyword: sonic anemometer ×

Model CSAT3 3-D - Sonic Anemometer

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The CSAT3 is a three-dimensional sonic anemometer. It measures wind speed and the speed of sound on three nonorthogonal axes. From these measurements, orthogonal wind speed and sonic temperature can be computed. The CSAT is used in eddy covariance applications to measure the turbulent fluctuations of horizontal and vertical wind. From the ...

WindMaster - Model 3D - Sonic Anemometer

by Gill Instruments Limited     based in Lymington, UNITED KINGDOM

The WindMaster 3D sonic anemometer will monitor wind speeds of 0-45m/s (0-100mph), providing digital outputs for U, V, and W vectors. Outputs for Speed of Sound and Sonic Temperature are available as standard.WindMaster is constructed from aluminium and carbon fibre and is available with either a 20Hz or 32 Hz data output rate. Optional analogue ...

Model WE-1100 - Sonic Anemometer

by Scientific Sales, Inc.     based in Lawrenceville, NEW JERSEY (USA)

The Model WE-1100 Sonic Anemometer (P/N 102779) is designed for ambient wind sensing in harsh environment industrial applications as a direct replacement for conventional mechanical propeller and cup anemometers, both in terms of performance and cost. It requires no periodic maintenance or calibration.

Climatronics - Model WE-2100 - Wind Energy Sonic Anemometer for Wind Turbine Control

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Specifically developed for wind turbine performance assessment and monitoring, Climatronics new, rugged, no moving parts, sonic anemometer provides the reliable wind speed and direction data so critical to efficient wind turbine operation. It is ideal for applications requiring high reliability, NO maintenance, ruggedness and/or ice-free ...

PVmet - Model 200 - Ultra Sonic Model

by RainWise Inc.     based in Trenton, MAINE (USA)

The PVmet- 200US ultra sonic commercial model features all the same high quality sensors as our best selling PVmet-200, upgraded with a precision Ultra Sonic anemometer. The Ultra Sonic anemometer offers a superior quality sensor with no moving parts greatly increasing it’s durability and practically eliminating maintenance.  As with ...

Model uSonic-1 Spinner - Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model uSonic-1 Flow - Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model uSonic-2 - Heavy Duty Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model uSonic-3 Class A - Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model uSonic-3 Omni - Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model uSonic-2 - Wind Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model HD2003 - Static Anemometer

by Bit Line     based in Collecchio, ITALY

Static anemometer for measuring the speed and direction of the wind.

Model uSonic-3 - Scientific Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

Model uSonic-2 - Tunnel Ultrasonic Anemometer

by METEK Meteorologische Messtechnik GmbH     based in Elmshorn, GERMANY

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

ATI - Model Sx Style Probe - Ultrasonic Anemometer, SATI Series

by Applied Technologies, Inc. (ATI)     based in Longmont, COLORADO (USA)

The 'Sx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for environmental monitoring where the horizontal wind measurements are required to be in the same plane. The W component measurement on the upwind side of the probe provides the most accurate and unobstructed value of vertical ...

ATI - Model SPAS/2Y - Commercial Anemometer System

by Applied Technologies, Inc. (ATI)     based in Longmont, COLORADO (USA)

The 'SPAS/2Y' style Ultrasonic Anemometer is a 2 axis, 2d, 15 cm, commercial Ultrasonic Anemometer. This sensor offers high quality performance in an inexpensive package. The electronics are contained within the probe and a single cable connects it to your PC. This sensor can provide nearly the accuracy and resolution of the scientific Ultrasonic ...

ATI - Model K Style Probe - Ultrasonic Anemometer, SATI Series

by Applied Technologies, Inc. (ATI)     based in Longmont, COLORADO (USA)

'K' Style Ultrasonic Anemometer - 3 axis, 3D orthogonal probe design. This meteorological instrument is a scientific grade wind speed, wind direction and temperature device for use in atmospheric boundary layer studies.  Array design assures minimum flow distortion errors in measured turbulence statistics. The 'K' style Ultrasonic Anemometer ...

Ultrasonic Anemometer 2D

by Theodor Friedrichs & Co.     based in Schenefeld, GERMANY

Ultrasonic wind sensor type 4300.0000 is designed for simultaneous measurement of horizontal wind speed and wind direction parameters as well as the acoustic temperature, without use of any moving parts. Its construction features a wide range of applications in meteorology and environment protection, e.g. with automatic weather stations, airports, ...

ATI - Model A Style Probe - Ultrasonic Anemometer, SATI Series

by Applied Technologies, Inc. (ATI)     based in Longmont, COLORADO (USA)

'A' Style Ultrasonic Anemometer - 3 axis, 3D non-orthogonal probe design. This meteorological instrument is a scientific grade wind speed, wind direction and temperature device for use in research grade, weather systems where high velocity information is required. This is the newest ultrasonic anemometer in the Meteorological Instruments Product ...

ATI - Model Vx Style Probe - Ultrasonic Anemometer, SATI Series

by Applied Technologies, Inc. (ATI)     based in Longmont, COLORADO (USA)

The 'Vx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer is a compact design for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within the probe bar. It operates on DC power with a power consumption of about 1 ...

Need help finding the right suppliers?

Let the XPRTs do the work for you