Sound Measuring Equipment Near Spain
-
Manufactured by Campbell Scientific, Inc.based in USA
The CSAT3A 3-D Sonic Anemometer is the 3-D sonic anemometer of choice for eddy-covariance measurements. It has an aerodynamic design, a 10 cm vertical measurement path, operates in a pulsed acoustic mode, and withstands exposure to harsh weather conditions. Three orthogonal wind components (ux, uy, uz) and the speed of sound (c) are ...
-
Manufactured by Hioki E.E. Corporationbased in JAPAN
Convenient measurement of sound levels from electrical equipment and machinery. Simple operation—no range switching needed Compact, lightweight design for easy one-handed operation. 30dB to 130dB. Analog ...
-
Manufactured by DEWESoftbased in SLOVENIA
The perfect solution for noise source determination brought to an entirely new level by Dewesoft. Sound intensity measurements reimagined in a simple and intuitive way while perpetuating utmost precision and industry unmatched ...
-
Manufactured by DEWESoftbased in SLOVENIA
Dewesoft Sound power solution merges best of both worlds: widely established sound power measurements with familiar, distinctive user interface and industry unmatched adaptability. Rate and compare different noise sources with ease and exactness while simultaneously monitoring any number of measured ...
-
Manufactured by DEWESoftbased in SLOVENIA
Due to its logarithmic frequency axis, octave analysis is an indispensable tool for sound measurement as well as predictive monitoring. Dewesoft octave analysis solution meets all of the IEC and ANSI Class I specifications for octave ...
-
Manufactured by DEWESoftbased in SLOVENIA
Due to its logarithmic frequency axis, octave analysis is an indispensable tool for sound measurement as well as predictive monitoring. Dewesoft octave analysis solution meets all of the IEC and ANSI Class I specifications for octave ...
-
Manufactured by Balcke-Durr GmbHbased in GERMANY
Broad range of sizes and materials available, like GFRP, stainless steel or galvanized steel. Optional add-ons such GFRP basin, cage ladder or stair tower etc. Including sound attanuation measures (air inlet sound attanuator, air outlet sound attanuator, impingement baffles, ultra low noise fans, etc.). Accessories (vibrations ...
-
based in AUSTRALIA
Portable solar-powered hardware for reliable and accurate real-time, unattended noise measurement. EMU Noise Logger: Unattended noise measurement. Noise monitoring is often required when new developments are planned or during compliance investigations. Assessments require sound levels to be measured over long periods of time to ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
. Coupled to a pressure sensor in a durable titanium housing, the SoundBar 2 is lowered through the water column, measuring the sound velocity as it goes. The display unit records this data and presents the mean sound velocity value over the profile, which may then be output in a variety of industry standard formats to the ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
remotely for on-site calibration checks. With the proper choice of microphone, it can provide frequency response characteristics consistent with precision sound level meter requirements for free-field or random incidence measurements. Equipped with A, C and Z-weighting filters and a 20 dB gain, the 426A12 is ideal for use with any electronic ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Under IEC and ANSI standards, a sound intensity measuring system consists of a two microphone sound intensity probe and a dual channel processor. The accuracy of the intensity measurement is strongly dependent upon the phase accuracy between the two measurement channels, including the microphones. ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
IEC 60942 Class 1 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Other Sound Measuring Equipment. The Larson Davis CAL200 Sound Level Calibrator is a battery operated precision microphone calibrator used for the calibration of sound ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
. Automated sequential multi-channel sound and vibration measurements using a single or dual channel analyzer under PC control via RS232 interface. One example is the measurement of sound power using multiple microphones in anechoic, hemi-anechoic, or reverberation rooms as per the ANSI S12.30 series or the ISO 3740 series of ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Quantitative measurements of sound pressure levels generated by firearms with and without suppression devices and silencers. Many firearm examiners are tasked with determining whether installation of a suppressor or silencer on a firearm results in a “perceptible” reduction of the sound pressure level of a gun. The Larson ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
for unattended monitoring and an inexpensive shroud to create a product that is ideal for remote sound level measurement. New in the PRM2103 is an automatic calibration check that checks five different frequencies all at the same time which enables better detection of any failure. When used with the Model 831 sound level meter, the acoustic ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The REF500 (120/240V, 50Hz) and REF600 (120/240V, 60Hz) Reference Sound Sources are an excellent tool for providing accurate and repeatable reference sound levels. These sources offer extremely flat response over a broad frequency range and are ideal for use in such applications as sound power, sound absorption, and ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
IEC 60942 Class 1 Handheld Sound Level Calibrator for 1” microphones at 251.2 Hz Used for Sound Level Meters and Other Sound Measuring Equipment. The Larson Davis Model CAL250 is a battery operated precision microphone calibrator used for the calibration of sound level meters and other ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters. The Larson Davis CAL150 Sound Level Calibrator is a battery operated precision microphone calibrator used for the calibration of sound level meters and other sound ...
-
Manufactured by Norsonic ASbased in NORWAY
Reference sound source for Sound Power measurements. The rugged and compact design makes it well suited for both laboratory and field use. The design ensures a stable and uniform sound power output with unique long-term stability. The reference sound source Nor278 is designed to produce a stable and uniform ...
-
Manufactured by Norsonic ASbased in NORWAY
The Microphone boom/turntable Nor265 may be used as a stand-alone device to obtain the spatial average of sound level by moving a measurement microphone back and forth continuously. Main applications are building acoustic measurements (ISO 140-series), measurement of sound absorption in a reverberation room (ISO ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you