Source Sampling Equipment
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments PFAS Sampling System is based on the EPA Other Test Method 45 (OTM-45) and Other Test Method 50 (OTM-50) for the isokinetic collection of PFAS from stationary sources. PFAS stands for per- and polyfluoroalkyl chemicals, which are found in a wide range of consumer products and facilities. PFAS can accumulate in the body and ...
-
Manufactured by Genius5-Instruments GmbHbased in AUSTRIA
The Genius5 Windselect includes an interface, where an ultrasonic windsensor is connected. The Windsensor measures Windspeed and Wind direction and transfes the results to the Genius5 controller once a second. The software defines 2 Windsectors for sampling and a threshold velocity The controller samples to 1 cartridges dependent on Wind ...
-
Manufactured by Camsco, Incbased in USA
Utilizing the same sorbent tubes used for fenceline monitoring, a personal sampling pump can quickly pull grab samples for an instantaneous measurement. The Active Sampling Kit can be used for collecting ambient samples between the source and the monitoring station. The pump provided allows for larger volumes ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Many air sampling procedures call for remote site sampling where the vacuum source (air sampling pump) cannot be conveniently located in the same area where sampling is required. This may be due to a variety of reasons including explosive sampling environments, inaccessibility, and noise level ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Model XC-523 is a full-feature manual meter console. Designed with a convenient display layout for manual data recording, this Isokinetic XC-523 Source Sampling Console allows the operator to monitor gas velocities, temperatures, and pressures and adjust sample flow rates to maintain isokinetic sampling ...
-
PremiumManufactured by CETCObased in USA
It is desirable to know the sand content of drilling muds because excessive sand may result in the deposition of a thick filter cake on the wall of the hole, or may settle in the hole about the tools when circulation is stopped, thus interfering with successful operations of drilling tools or setting of casing. High sand content also may cause excessive abrasion of pump parts and pipe ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and has worked with a leading industry partner to improve the quality of natural gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran Model 2641 Portable Mercury Sampler ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms. If you require 0-1000ppm analysis, please see our ZR1000. For those applications where a source of sample flow is not available, the 905P ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Methane, Non-Methane Total Hydrocarbons and Total Hydrocarbons with ChromaTHC-OCU. When odor issues occur at an industrial site, rapid diagnosis must be done to define the best source treatment strategy. Manual sampling techniques can lead to problems during sampling and transport to the laboratory for analysis. Therefore, there is a ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1115i Synchronized Multi-Port Sampling System utilizes the advanced capabilities of the Model 2537X Mercury Vapor Analyzer to conditionally control up to eight separate valve input/output ports. The 1100i can be configured to automatically sample eight separate input ports. With the 1115i valves can be triggered based on a ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 Mr analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mr is modular designed and capable of simultaneously measuring NO, NOx and NO2 from sources with pressure variations. It features a dual inlet option for assessing two different sources at ...
-
Distributed by Oak Environmental Inc.based in CANADA
Oak is a proud distributor of the Waterra line of ground water sampling products. We also source sampling supplies from other manufacturers (i.e. QED, Geotech, SKC, and ...
-
Distributed by Artec Testnologybased in NETHERLANDS
Quantify the warm/cool sensation of textiles and fabrics via ASTM D7984 The C-Therm Tx employs the patented Modified Transient Plane Source (MTPS) technique. The one-sided, interfacial heat reflectance sensor applies a momentary constant heat source to the sample. Thermal conductivity and effusivity are measured directly, providing a ...
-
Manufactured by Udeyraj Electricals Private Limitedbased in INDIA
UDEY ‘CTPTA-504 is a comprehensive CT and PT analyzer. It’s constant voltage and current is highly stable. DSP system controls the constant voltage and current source output and amplitude. This source generates AC of 0-125V and or DC of 0-0.5A current to sample CT. The DSP system besides controlling the sources, also ...
-
Manufactured by Meyer Burgerbased in SWITZERLAND
. The modular concept of MicroSys 200 / MicroSys 300 allows a customized setup of plasma sources and sample heating or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you