Spectroscopy Method Equipment Available In Connecticut
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
testing with the NanoRam-1064 can be performed through transparent containers, all the while maintaining sample volume and integrity. The unit also offers full onboard library and method validation, making a complinat workflow for methods and library ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with fixed slit width for simultaneous measurement of sample and reference ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm NIRS lab analyzers enable you to perform routine analysis quickly and with confidence – without requiring sample preparation or additional reagents and yielding results in less than a minute. Combining visible (Vis) and near-infrared (NIR) spectroscopy, these analyzers are capable of performing qualitative analysis of ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with five variable slit widths and double monochromator for reducing stray light for simultaneous measurement of sample and reference signal, ideal for samples with particularly high absorptions and higher stray light ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with five variable slit widths for the simultaneous measurement of sample and reference signal in a wide measurement range from 185-1200 nm, optimal for the measurement of solutions and solids with highest demands on optical ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Dual-beam photometer with split beam technology for routine qualitative and quantitative photometric ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Vehicle-based solution for the network inspection of underground gas pipes:economical – laser-based – fully automatic. The LaserGasPatroller is a vehicle-based solution for the economical network inspection of underground gas pipes. Gas leaks are detected when the laser-based measuring system LGP 800 is driven over the gas pipes. The LGP 800 is operated by the SeCuRi SAT software ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NanoRam is a state-of-the-art, handheld Raman instrument for nondestructive identification and verification of incoming raw materials such as APIs, excipients, and intermediates. Compact and flexible, the NanoRam can be used by non-technical users to rapidly identify samples in the warehouse, on the loading dock, or in the lab, minimizing quarantine areas and expediting materials through the ...
-
Manufactured by INDATECH - Chauvin Arnoux Groupbased in FRANCE
Proteins, which are highly reactive molecules, are present in very small quantities, so they require a spectroscopy method suitable for such low concentrations. Due to its high sensitivity, UV spectroscopy is ideal for this type of measurement. ...
-
Manufactured by Chinainstru & Quantumtech (Hefei) Co.,Ltd.based in CHINA
Electron paramagnetic resonance (EPR) or electron spin resonance (ESR) spectroscopy is a method for studying materials paramagnetic species. EPR spectroscopy is particularly useful for studying metal complexes or organic radicals. EPR200 is designed for CW-EPR application. It is a powerful analytical tool for routine EPR research. EPR 200 ...
-
Manufactured by Chinainstru & Quantumtech (Hefei) Co.,Ltd.based in CHINA
Electron paramagnetic resonance (EPR) or electron spin resonance (ESR) spectroscopy is a method for studying materials paramagnetic species. EPR spectroscopy is particularly useful for studying metal complexes or organic radicals. EPR200 is designed for CW-EPR application. It is a powerful analytical tool for routine EPR research. EPR 200 ...
-
Manufactured by Bridge12 Technologies, Inc.based in USA
Overhauser Dynamic Nuclear Polarization (ODNP) spectroscopy is a powerful method for site-specific studies of hydration dynamics at or near bio-macromolecules, membrane proteins, or other solid/liquid interfaces. ODNP can be used to enhance the signal intensity in low-field NMR spectroscopy. Bridge12 manufactures microwave power sources ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM 500 is an extractive on-line gas analyser dedicated to continuous emission monitoring (CEM). This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years). It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
-path flow cell of 1200 mm coupled to a high resolution spectrograph (0.1 nm) using an ultra-sensitive 2048 pixels CCD (charge-coupled device). It gives a high sensitivity and a longer lamp life time (3 years). The uv spectroscopy brings a higher sensitivity than Infra-red spectroscopy and also gives the possibility to measure several ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years) It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
-path flow cell of 1200 mm coupled to a high resolution spectrograph (0.1 nm) using an ultra-sensitive 2048 pixels CCD (charge-coupled device). It gives a high sensitivity and a longer lamp life time (3 years). The uv spectroscopy brings a higher sensitivity than Infra-red spectroscopy and also gives the possibility to measure several ...
-
Manufactured by Moor Instruments Ltdbased in UNITED KINGDOM
The moorVMS-OXY superficial tissue oxygenation monitor uses a white light spectroscopy method to assess superficial tissue oxygen saturation (SO2), tissue haemoglobin concentration and temperature. The technique offers practical advantages such as simplicity in use, real time measurement and the possibility to measure tissue oxygenation, ...
-
Manufactured by KORBI Co., Ltd.based in SOUTH KOREA
HATP-4000 is a measuring instrument that automates the ultraviolet / visible spectroscopy (thermal oxidation method) of the water pollution test method. In the pretreatment step, potassium persulfate is added to the sample and heated at 120°C for 30minutes to oxidize and decompose the phosphorus compound into phosphate form. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you