Only show results available in Virginia? Ok

spiral wound reverse osmosis equipment

  • Premium

    ADVANCEES - Model CCP Series - Seawater Reverse Osmosis Pretreatment / Seawater Reverse Osmosis Post-treatment

    Pre-treatment is important when working with RO and nanofiltration (NF) membranes due to the nature of their spiral wound design. The material is engineered in such a fashion to allow only one way flow through the system. As such the spiral wound design doesn't allow for backpulsing with water or air agitation to scour its surface and remove ...

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • DOW FILMTEC - Model FORTILIFE™ XC-N - Spiral-wound Element

    The DOW FILMTEC™ FORTILIFE™ XC-N Element allows industrial end users to reduce costly reverse osmosis (RO) concentrate waste by converting a large fraction of RO concentrate into pure, easier-to-crystallize salt solutions.

    By Dow Water & Process Solutions based in Midland, MICHIGAN (USA).

  • DOW FILMTEC - Model FORTILIFE™ XC70 - Spiral-wound Element

    The DOW FILMTEC™ FORTILIFE™ XC70 Element offers the ability to achieve reject Total Dissolved Solids (TDS) level > 70,000 ppm within standard reverse osmosis (RO) operating limits, helping maximize the RO recovery rate. The element also provides improved fouling resistance and cleaning efficiency through careful module design and ...

    By Dow Water & Process Solutions based in Midland, MICHIGAN (USA).

  • DOW FILMTEC - Model FORTILIFE™ XC80 - Spiral-wound Element

    The DOW FILMTEC™ FORTILIFE™ XC80 Element offers users the ability to achieve reject Total Dissolved Solids (TDS) level > 80,000 ppm within standard reverse osmosis (RO) operating limits, helping lower brine volume and maximize water recovery in the brine concentration step. The element also provides improved cost-efficiency of the ...

    By Dow Water & Process Solutions based in Midland, MICHIGAN (USA).

  • Spiral Wound Module

    Wound modules provide large membrane surfaces in relation to the module volume. The special design provides for optimum filtering properties at minimum energy consumption. There are sanitary and industrial versions available for the various application scenarios. Abwa-tec GmbH is a manufacturer of membrane systems in the nano and reverse osmosis ...

    By Abwa-tec GmbH based in Oberndorf, GERMANY.

  • Spiral Wound Membranes

    Produce pure water, recover valuable assets, reduce costs with GE membranes. GE’s spiral wound membrane elements cross the spectrum of membrane including reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF). Originally designed for water desalination, spiral wound membranes are now used in a variety of ...

  • Reverse Osmosis Membranes

    Reverse Osmosis (RO) is a proven technology and widely applied as the final step in many water treatment processes in order to turn polluted water into drinkable or reusable water. The Aquaporin Inside™ technology allows RO membranes to have both improved water flux and higher rejection rates. All our RO products are made from flat ...

    By Aquaporin A/S based in Kongens Lyngby, DENMARK. from Reverse Osmosis Membranes Product line

  • Reverse Osmosis Systems

    Agape Water Solutions, Inc. provides RO Systems which utilize semi permeable membranes to purify water. Membranes are manufactured by companies such as Toray America, Hydranautics and Dow Filmtec. The spirally wound membranes are housed inside a round pressure vessel. Water pressure is applied at the membrane inlet to remove dissolved solids from ...

    By Agape Water Solutions, Inc. based in Harleysville, PENNSYLVANIA (USA).

  • Reverse Osmosis (RO) 1812 Elements

    1812 spiral wound RO membrane elements are perfect for mimicking operating conditions that are representative of full size reverse osmosis membrane filtration systems.

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Reverse Osmosis (RO) 1812 Elements Product line

  • Sea Water Reverse Osmosis Units

    Tech Universal's Seawater Reverse Osmosis system design incorporates the updated membrane technology of spiral wound (thin film composite) membranes and hollow-fine fibre type membrane, where salt rejection reaches 99.8%.

    By Tech Universal (UK) Ltd based in Cardiff, UNITED KINGDOM. from Sea Water Reverse Osmosis Units Product line

  • Watertrak - Reverse Osmosis (RO) System

    Reverse Osmosis (RO) uses a semi-permeable spiral wound element to remove up to 99% of dissolved solids (TDS) and bacteria from the feed water source. A high pressure feed pump forces raw water into thin film membrane layers thus allowing the permeate product water to collect in the center tube of the RO element. Water containing impurities and ...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA). from Reverse Osmosis (RO) System Product line

  • Sea Water Reverse Osmosis (SWRO)

    Sea Water Reverse Osmosis (SWRO) is a reverse osmosis desalination membrane process that has been commercially used since the early 1970s. The typical single-pass SWRO system consists of the following components: Intake, Pretreatment, High pressure pump, Membrane assembly, Remineralisation and pH adjustment, Disinfection, Alarm/control panel. ...

    By Global Aqua Technologies Co. Ltd. (GATCO) based in Jeddah, SAUDI ARABIA.

  • ROMEMBRA - Toray RO Membrane

    TORAY first began producing Reverse Osmosis and Nanofiltration spiral wound membrane elements in 1967, starting with cellulose acetate membrane elements. Today, our product line includes a full range of state-of-the-art cross-linked polyamide composite membranes manufactured under ISO-9001 certification.

    By Toray Membrane Europe based in Münchenstein, SWITZERLAND.

  • Analog 1812 Membrane Test Skid

    Sterlitech 1812 Membrane Test Skids are designed to evaluate the performance of membranes widely used in Reverse Osmosis, Nanofiltration, Ultrafiltration, and Microfiltration applications by simulating the flow dynamics of larger, commercially available membrane systems. This test skid offers experimental control by allowing adjustment of the flow ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Analog 1812 Membrane Test Skid Product line

  • Dow - Model EDI-310 - Electrodeionization Modules

    DOW Electrodeionization EDI-310 modules are made using a patented spiral wound design containing membrane and ion exchange resins sealed in a high strength fiberglassed reinforced plastic (FRP) pressure vessel. The modules can be used in place of conventional mixed bed ion exchange for polishing of reverse osmosis (RO) permeate eliminating the ...

    By Dow Water & Process Solutions based in Midland, MICHIGAN (USA). from Electrodeionization Modules Product line

  • Desalination

    Ultrapure & Industrial Services reverse osmosis units are designed and manufactured for sea water applications. They are horizontal configurations utilizing horizontal high-rpm centrifugal pumps. They are pre-engineered, pre-assembled units that minimize installation and start-up costs. They are fully tested at the factory and require simple ...

    By Ultrapure & Industrial Services, LLC based in Dallas, TEXAS (USA).

  • KYsearo - Model 2000 TPD - Seawater Desalination System

    KYsearo is one of the specially authorised partner of TOYOBO in China. We use TOYOBO hollow fiber RO membrane to desalinate water in large systems of above 200TPD.TOYOBO hollow fiber RO membrane is the latest technological reverse osmosis membrane,its fresh water production capacity is 10 times than usual spiral wound membrane,so many seawater ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you