Showing results for: Split Case Equipment Near Turkey
-
Manufactured by Layne Bowler Pump Company Inc.based in TURKEY
Horizontal, radially split volute casing type, single stage, end suction centrifugal pump with enclosed impeller. Dimensionally complies with DIN 24255 / EN 733.In addition to 29 basic sizes conforming with DIN 24255 / EN 733, there are 20 additional sizes. Dimensions of additional sizes can differ from other suppliers. The suction and ...
-
Manufactured by Sempa Pompa Limitedbased in TURKEY
Discharge Flange : DN 65 – DN 600. Capacity : up to 6000 m³/h. Head : up to 180 m. Working Temperature : From -20 °C to + 110 °C*. Casing Pressure (Pmax) : 16 bar - 25 ...
-
Manufactured by Procompactor Waste Management Equipment & Vehiclesbased in TURKEY
Combi Jetting Vacuum Vehicles Equipments are designed for the removal of clogged sewage canals and manholes. They are capable of vacuuming sludge, wastewater, and half solid waste inside their sludge tank by strong vacuum force created by means of a vacuum pump. For more on this ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HTRV-A split tube furnaces have a maximum operating temperature of 1700 °C. The split heating module allows either easy positioning of the work tube or positioning around reactors which have fixed end flanges. The split design may also allow faster cooling of samples. The control thermocouple is fitted in the centre of the heating ...
-
Manufactured by Turbosan Turbomakinalar San. ve Tic. A.S.based in TURKEY
Our horizontal end suction NORM and split case CEP pumps which are manufactured to be used in fire fighting pump sets, have “UL LISTED” and “FM APPROVED” certification. In these sets; electric motor, diesel engine, controller and other connection equipment with UL Listed and FM Approved certification are used. Our ...
-
Manufactured by Turbosan Turbomakinalar San. ve Tic. A.S.based in TURKEY
The Turbo-CEP series pumps designed for general purposed are made of double enrty, single state with casing axialy ...
-
Manufactured by MAS DAF MAKINA SAN. A.S.based in TURKEY
Single stage, axially split casing, double-suction pumps. Double entry radial impeller has hydraulic thrust compensation. Suction and discharge flanges are along the same line. Upper body is lighter than the lower body and joins it in such a way that it is easily assembled. Double suction pumps have the advantage of low NPSH (net positive ...
-
Manufactured by Norm Hydrophore Pumpbased in TURKEY
Nominal Flow 400 gpm / 91 m3/h. Nominal Pressures (m ...
-
Manufactured by A.M. Industrial Technologies ITLbased in ISRAEL
Type: Single Stage Axially Split Case Pumps with double entry impeller. Size Range: 50mm(2") to 400mm(16") discharge nominal bore. Capacity: up to 3000 m3/hr. Head: up to 200 m. Speed: up to 3000 rpm. Construction: Single / double volute depending on head. Soft packed / mechanical seal fitted options. Horizontal / vertical shaft. CW / CCW ...
-
Manufactured by A.M. Industrial Technologies ITLbased in ISRAEL
Type: Two Stage Axially Split Case Pumps with two single or two double entry impellers. Size Range: 65mm(2.5") to 250mm(10") discharge nominal bore. Capacity: up to 1200 m3/hr. Head: up to 360 m. Speed: up to 3000 rpm. Construction: CW /CCW rotation. Internal /external cross-over depending on size. Horizontal / vertical shaft. Soft ...
-
Manufactured by Goksan Pompa Sanayi ve Ticaret A.S. (SEP)based in TURKEY
Pumped Fluid: Low viscosity, clean or slightly polluted without any solid particles and fiber ...
-
Manufactured by Goksan Pompa Sanayi ve Ticaret A.S. (SEP)based in TURKEY
They are horizontal shaft, single stage, end suction pumps with radial/mixed flow closed impeller SEP GDS series pumps are manufactured different types from DN 80 to DN 350. SEP GDS series pumps are adventages other pump types: Minimal axial thrust due to double- entry impellerL. Quick and easy assembly/dismantling of the rotor components due to elastically prestressed mountings. Short and rigid ...
-
Manufactured by Z.E.T. Industriesbased in ISRAEL
to pressure without risk of splitting even in the case of blockage. The filter lining eliminates the turbulent flow and releases the trapped air, at the top of the trap there is an opening to install an air release valve. At the bottom of the trap there is a large opening washing waste collection chamber without the need for dismantling the ...
-
Manufactured by Fullblaze Middle East- Fire Pumpsbased in JORDAN
Capacities 500 up to 1500 GPM, FM/UL ...
-
Manufactured by Termomeccanica S.p.A. (TM.P.)based in ITALY
Single stage, axially split casing, double suction impeller. These pumps are distinguished by a considerable disassembly and maintenance simplicity, with low operating costs added to high operational security and reliability. The two sliding guide bearings are located inside the pump casing and they are lubricated by the pumped fluid, ...
-
Manufactured by Termomeccanica S.p.A. (TM.P.)based in ITALY
Two and three stage, axially split casing and double volute pumps designed in accordance with API 610 standards. D2D type pumps have two stages, both with double suc-tion impeller. PF type pumps have two or three stages, the second and third one with single suction impeller. Horizontal arrangement, center line mounted. The ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
The HSM pump is a heavy-duty process pump of our Industrial Line mainly for high pressure ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
The Ruhrpumpen type SMI is a heavy duty, horizontal, axial split casing, volute type, multi-stage, centrifugal pump according to API 610, latest edition. SMI pumps with axial split casing are robust and reliable. Hydraulic balance is obtained by arranging the impellers in opposed ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
The HSR pump is a horizontal, single stage, double suction, double volute axially split case centrifugal pump. The suction and discharge nozzles are integrally cast in the lower half of the casing and on the same horizontal centerline. The nozzle configuration is ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
Design Features: NFPA-21, UL-448, FM-1311, Special design available on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you