Showing results for: Split Case Equipment Near Ukraine
-
Manufactured by MZT Pumpibased in MACEDONIA
Horizontal Split Case Double Suction Centrifugal Pumps D are engineered to pump clean water or low viscosity clean liquids at moderate heads more economically than any other type of pump. All fabricated parts are standardized and accurately machined for true alignment, increasing overall durability. Impellers are statically and ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HTRV-A split tube furnaces have a maximum operating temperature of 1700 °C. The split heating module allows either easy positioning of the work tube or positioning around reactors which have fixed end flanges. The split design may also allow faster cooling of samples. The control thermocouple is fitted in the centre of the heating ...
-
Manufactured by Termomeccanica S.p.A. (TM.P.)based in ITALY
Single stage, axially split casing, double suction impeller. These pumps are distinguished by a considerable disassembly and maintenance simplicity, with low operating costs added to high operational security and reliability. The two sliding guide bearings are located inside the pump casing and they are lubricated by the pumped fluid, ...
-
Manufactured by Termomeccanica S.p.A. (TM.P.)based in ITALY
Two and three stage, axially split casing and double volute pumps designed in accordance with API 610 standards. D2D type pumps have two stages, both with double suc-tion impeller. PF type pumps have two or three stages, the second and third one with single suction impeller. Horizontal arrangement, center line mounted. The ...
-
Manufactured by Norm Hydrophore Pumpbased in TURKEY
Nominal Flow 400 gpm / 91 m3/h. Nominal Pressures (m ...
-
Manufactured by Turbosan Turbomakinalar San. ve Tic. A.S.based in TURKEY
Our horizontal end suction NORM and split case CEP pumps which are manufactured to be used in fire fighting pump sets, have “UL LISTED” and “FM APPROVED” certification. In these sets; electric motor, diesel engine, controller and other connection equipment with UL Listed and FM Approved certification are used. Our ...
-
Manufactured by Turbosan Turbomakinalar San. ve Tic. A.S.based in TURKEY
The Turbo-CEP series pumps designed for general purposed are made of double enrty, single state with casing axialy ...
-
Manufactured by MAS DAF MAKINA SAN. A.S.based in TURKEY
Single stage, axially split casing, double-suction pumps. Double entry radial impeller has hydraulic thrust compensation. Suction and discharge flanges are along the same line. Upper body is lighter than the lower body and joins it in such a way that it is easily assembled. Double suction pumps have the advantage of low NPSH (net positive ...
-
Manufactured by Ebitt Fluid Technologiesbased in HUNGARY
Single-stage horizontal centrifugal pumps, with suction and discharge flanges on the same axis. Split case design allows disassembly of pump hydraulic parts without disassembling suction and discharge flanges. Double suction impeller design increases suction performance and balances axial forces on impeller and ...
-
Manufactured by Layne Bowler Pump Company Inc.based in TURKEY
Horizontal, radially split volute casing type, single stage, end suction centrifugal pump with enclosed impeller. Dimensionally complies with DIN 24255 / EN 733.In addition to 29 basic sizes conforming with DIN 24255 / EN 733, there are 20 additional sizes. Dimensions of additional sizes can differ from other suppliers. The suction and ...
-
Manufactured by FLSmidthbased in USA
A heavy-duty slurry pump for tough, abrasive applications; Our KREBS UMD™ centrifugal slurry pump is the most advanced heavy-duty slurry pump available for mill discharge applications. Optimized hydraulic design delivers the highest efficiency and even wear in the most abrasive mining ...
-
Manufactured by FLSmidthbased in USA
Proprietary-design slurry pump; The key advantages of our efficient millMAX Slurry Pump design are lower power requirements (up to 30% less); long, even wear life; and less pump downtime – all of which result in lower cost-per-ton pumped along with better cyclone ...
-
Manufactured by FLSmidthbased in USA
The slurryMAX XD has found success all over the world, in the most aggressive applications, for more than a decade. Extremely thick elastomer liners and a heavy-duty impeller provide this pump with extended wear life, in addition to all of the advantages gained from the millMAX suction-side-sealing ...
-
Manufactured by FLSmidthbased in USA
Our Split-case slurryMAX™ Pump solution; You asked for a split-case pump with longer wear life and better efficiency – one that can easily and safely be installed throughout your plants. Our solution? The slurryMAX, with multiple liner and impeller material ...
-
Manufactured by Procompactor Waste Management Equipment & Vehiclesbased in TURKEY
Combi Jetting Vacuum Vehicles Equipments are designed for the removal of clogged sewage canals and manholes. They are capable of vacuuming sludge, wastewater, and half solid waste inside their sludge tank by strong vacuum force created by means of a vacuum pump. For more on this ...
-
Manufactured by Goksan Pompa Sanayi ve Ticaret A.S. (SEP)based in TURKEY
Pumped Fluid: Low viscosity, clean or slightly polluted without any solid particles and fiber ...
-
Manufactured by Goksan Pompa Sanayi ve Ticaret A.S. (SEP)based in TURKEY
They are horizontal shaft, single stage, end suction pumps with radial/mixed flow closed impeller SEP GDS series pumps are manufactured different types from DN 80 to DN 350. SEP GDS series pumps are adventages other pump types: Minimal axial thrust due to double- entry impellerL. Quick and easy assembly/dismantling of the rotor components due to elastically prestressed mountings. Short and rigid ...
-
Manufactured by Sempa Pompa Limitedbased in TURKEY
Discharge Flange : DN 65 – DN 600. Capacity : up to 6000 m³/h. Head : up to 180 m. Working Temperature : From -20 °C to + 110 °C*. Casing Pressure (Pmax) : 16 bar - 25 ...
-
Manufactured by Andritz AGbased in AUSTRIA
ANDRITZ multi-stage axial split case pumps are highly engineered pumps designed to customers’ specific requirements. Among other benefits, they are notable for their excellent efficiencies above industry average, very good NPSH values and low energy consumption. ...
-
Manufactured by Croatia Pumpe Nova Ltd.based in CROATIA
Although outstanding by the simplicity of their maintenance and control during operation, double inlet single stage nonself-priming DH and selfpriming DHs pumps, as such, represent a kind of highly serviceable, long-life and tested pump devices. DHv pumps adaptable from DH pumps are used for temperature of 100 to 150°C. It means that each of the mentioned DH pumps - on the purchaser's wish - ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you