stack gas Equipment available in Cayman Islands

Available in Cayman Islands| Near Cayman Islands
523 Results found

We couldn't find any stack gas equipment in Cayman Islands

Here is a list of results available in Cayman Islands

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: stack gas ×

  • Available in: Latin America ×

  • Available in: Cayman Islands ×


Instrumatic OXYDAN - Model DPIII/79x - Stack Gas Dilution Sampling Probe

by Instrumatic A/S     based in Ry, DENMARK

Instrumatic is a world leader in design and manufacture of exhaust gas dilution probe systems. In compliance with Environmental Protection Administrations and tested by International Association of Instruments Users SIREP-WIB-EXERA 1993.No matter how good or precise the analyzer/sensor are the result never better than the sample provided to the ...

Land - Model FGA 900 Series - Range of Stack Gas Emissions Analysers

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The FGA range of analyzers use dual sensor technology to measure the levels of Nitrogen Oxides, Carbon Monoxide and Oxygen in flue gas. O2, CO, NO, NO2, NOX.

Environnement S.A. - Model HOFI PROBE - Hot Extractive Stack Gas Sampling System

by Environnement S.A     based in Poissy, FRANCE

Hot extractive Stack gas sampling system. Gas sampling system to be connected to heated analyzers( e.g. MIR FT ).

Lancom - Model 4 - Portable Combustion & Stack Emissions Gas Analyser

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The Lancom 4 is a compact, portable combustion and emissions analyser for checking or testing a boiler system or pollutant process. Building on the success of the Lancom III, the Lancom 4 is represents the next generation of portable gas analyser technology. It has the capability to monitor up to 9 different gases, and a total of 17 measurement ...

Stack Gas Analyzer - Model OMGA-8000 - Online Stack Gas Analyzer

by Vasthi Engineers Pvt Ltd     based in Hyderabad, INDIA

The Vasthi Online Stack Gas Analyzer for Nox and Sox gases uses microprocessor control and Direct Extractive detection method to measure high concentration total oxides of Nitrogen (Nox), and total oxides of Sulfuric (Sox). The analyzer delivers excellent sensitivity and reliability by using single measurement channel and gas sample accumulator to ...

Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a ...

Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

GCEM - Model 40 Series - Extractive Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been ...

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

Model 1010 - Cross Duct CO Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The Model 1010 is a single channel cross-duct analyser for the measurement of CO. It uses an infrared transmitter to project a beam of light across the duct to a receiver mounted opposite. The light beam is tuned to a specific wavelength where the CO molecules absorb the light energy but there is no interference from water vapour and other gases. ...

Model RB Technologies O2 Probe - Stack Gas Analysers

by ENVIRONMENTAL CONSULTANCY SERVICES     based in Bibra Lake, AUSTRALIA

The RB Technologies ZR Probe Oxygen Detector is of a very high safety level that includes 3 certified flame arrestors.

Model VCEM5000 - Gas Velocity Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Model SM-3 - Mercury Stack Gas Monitor

by Mercury Instruments GmbH, Analytical Technologies     based in Karlsfeld, GERMANY

The SM-3 Mercury Stack Gas Monitor is used for continuous monitoring of mercury in stack gas. Bound forms of mercury like HgCl2, HgO, HgS and particulate mercury are detected as well as elemental mercury.

HI-Q - Gas Sampling & ISO-Kinetic Sampling Probes

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design ...

Online Stack Gas/CEM Systems

by P S Analytical Limited     based in Orpington, UNITED KINGDOM

The emission of mercury into the environment is now of global concern because of its high toxicity, bioaccumulation and long range atmospheric transport. It is estimated that over half the mercury emissions to the atmosphere are caused by anthropogenic activities. (Further information is available from the EPA website). The majority are caused by ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...


NEO Monitors - Model LaserGas™ II SP - Single Path Monitor for In-Situ Measurement in Stacks

by NEO Monitors AS     based in Skedsmokorset, NORWAY

Single Path Monitors are designed for in-situ measurement in stacks, ducts, or reactors with typical path lengths in the range 0.5 to 20 meters. By-pass and extractive configurations are also possible. The monitors’ compact design comprises the transmitter unit with laser module; collimating optics, and main electronics and the receiver unit ...

Land - Model CEMs - Continuous Emissions Monitoring System Backup

by AMETEK Land     based in Dronfield, UNITED KINGDOM

What happens to your emissions data when a CEMs undergoes routine maintenance or an unexpected breakdown occurs?. Simple, it continues to be captured with the LAND CEMs Back-up system. This system keeps data downtime to a minimum - and ensures that any possible restrictions on data availability as part of an operating permit are met. The CEMs ...

Cerex - Model UV3000P - Fixed Mount Multi-Gas Analyzer

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

Insitu DeSOX, DeNOx – Ammonia Slip, General CEMs; The Cerex UV3000P is a fixed mount insitu multi-gas analyzer with a flange adapted probe. Gas concentration measurements are made directly within the stack gas stream. There is no loss of water soluble compounds. Available with two ports for operator specified quality assurance audits, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you