Stack Gas Emissions Monitoring Equipment Available In Africa
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our transportable model 3-200 fully heated FID is successfully used throughout international markets for over 30 years. Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using our proprietary back purge sample filter. It is widely distributed throughout the industry and the stack ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. The sample injection method is used in this 190 deg.C heated sample diluter for fast response and improved zero and span ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 3-300A heated FID was designed in the early 80's as a space saving alternative to our VE7. Also the 3-300A was a "first" in the industry due to its sample filter back purge feature. It is also a very much liked 19" rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgivingness and long ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
purging, this technique allows uninterrupted measurements during cleaning of the sample filter while not in the sample mode. During back purging the sample filter, the sample line is also cleaned. The use of a stack probe filter is not ...
-
Manufactured by Testa GmbHbased in GERMANY
The 19” Flame-Ionisation-Detector (FID) 1230NMHC measures with its built-in NMHC-Cutter the methane concentration (methane only) and after switching to THC in a wide range of applications like stack gas emissions monitoring, ambient air monitoring, thermal reactor and combustor emissions ...
-
Manufactured by Testa GmbHbased in GERMANY
The portable TESTA High Temperature Heated FID 2010 NMHC measures with its built in NMHC Cutter the methane concentration (methane only) and after switching over to a different channel also the THC in a wide range of applications like stack gas emissions monitoring, ambient air monitoring, thermal reactor and ...
-
Manufactured by Testa GmbHbased in GERMANY
The stationary Flame-Ionisation-Detector (FID) iFiD NMHC measures with its built in NMHC Cutter the methane concentration and parallel in a second channel also the THC in a wide range of applications like stack gas emissions monitoring, ambient air monitoring, thermal reactor and combustor ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High-performance analysis of total hydrocarbons (THC), methane (CH4) and non-methane hydrocarbons (NMHC). The SERVOPRO HFID heated total hydrocarbon analyzer utilizes a highly sensitive Flame Ionization Detector (FID) for measuring volatile hydrocarbon concentrations in vehicle/engine certification testing and industrial gas stack ...
-
Manufactured by Sierra Instruments, Inc.based in USA
North America's #1 selling thermal mass flow sensor(Flow Research, Boston MA) can be integrated into your end product package as a thermal mass flow sensor probe or probe / electronics set. Tell us the length of the insertion mass flow sensor probe and we will make it to your exact ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Named North America's #1 selling thermal mass flow meter (2009 Flow Research, Boston MA), Sierra’s SteelMass Model 640S delivers precise measurements for heavy-duty industrial gas mass and air flow meter measurement applications. This insertion thermal mass air/gas flow meter offers precision SCFM (standard cubic feet per minute), ...
-
Manufactured by VIG Industriesbased in USA
The VIG Industries, Inc. Model 300/2 is designed to measure a two gasses (or three with oxygen option). The Model 300/2 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving parts in the Model 300/2 optical bench which ...
-
Manufactured by VIG Industriesbased in USA
The VIG Industries, Inc. Model 300 is designed to measure a single gas (or two with oxygen option). The Model 300 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you