stack testing Equipment | Environmental XPRT

CGA and RATA - Stack Testing System

Monitor Tech can do your the Relative Accuracy Test Audit (RATA) in accordance with the procedures mandated by the EPA in 40 CFR method test procedures.Monitor Tech will perform the required quarter preventive maintenance before each ...

By Monitor Tech Lab LLC based in Columbus, OHIO (USA).

Pace - Stack Testing System

PACE Environmental offers state-of-the-art mobile laboratories to provide quality, affordable testing of all vapor control devices for regulatory, certification, process and stack testing. PACE’s varied testing capabilities are performed in accordance with Federal, State and Local test methods including ...

By Pace Environmental based in Whitehall, PENNSYLVANIA (USA). from Stack Testing Product line

Model RTOs - Mobile Testing System

We can use one of our mobile RTOs to test emissions at your facility and demonstrate the effectiveness of our ThermaGrid technology. Those tests well allow us to gather the data needed to size a full-scale RTO to solve your VOC problem ...

By McGill AirClean LLC based in Columbus, OHIO (USA). from Mobile Stack Testing Product line

Model ESP - Mobile Testing System

Our mobile ESP can be used to study your emission problem on site and develop an effective solution. This equipment enables us to analyze your flue gas stream, determine ESP collection efficiencies, and collect data to size a full-scale wet or dry ESP system for your ...

By McGill AirClean LLC based in Columbus, OHIO (USA). from Mobile Stack Testing Product line

Mobile Scrubber Testing System

We can test emissions on site and engineer an acid gas control system for your application. By using our mobile spray-dry scrubber in conjunction with our mobile ESP, we can demonstrate the effectiveness of a full-scale air pollution control ...

By McGill AirClean LLC based in Columbus, OHIO (USA). from Mobile Stack Testing Product line

Premium

Certifier FA - Model 4070 - Flow Analyzer Ventilator Test System

Low-cost flow analyzer system capable of testing multiple parameters of ventilator performance. The 4070 Certifier FA System is made up of a 4076 Certifier FA High-Flow Module Kit and an 4078 Certifier FA Interface Display Module ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Certifier Flow Analyzers Product line

Premium

J.U.M. - Model 3-300A - High Temperature Total Hydrocarbon Analyzer

The 3-300A heated FID was designed in the early 80's as a space saving alternative to our VE7. Also the 3-300A was a "first" in the industry due to its sample filter back purge feature. It is also a very much liked 19" rack mount heated FID throughout the stack testing community and well known for its ...

By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Heated FID Analyzers - FIDs with Backpurge Filter Product line

Premium

J.U.M. - Model 3-200 - Portable High Temperature Total Hydrocarbon Analyzer

the industry and the stack testing community and is much liked for its ruggedness, high accuracy, sensitivity and stability. Our optional 50 liter low pressure metal hydride fuel storage can easily be mounted on the left side panel and allows a 45 hour minimum of uninterrupted operation. This fuel storage can be ...

By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Heated FID Analyzers - FIDs with Backpurge Filter Product line

Premium

TCR Tecora - Model ISOFROST 3 - Closed Circuit Portable Chiller

ISOFROST 3 was born from the development of previous chiller systems ISOFROST and ISOFROST 2. ISOFROST 3 is able to support multiple samplings in extreme environmental conditions (e.g. summer season). A magnetic drive recirculation pump is incorporated in the device and not takes up valuable space in the tub allowing simultaneous sampling of PCDD/F & PCBs and others (e.g heavy metals, ...

By TCR-Tecora based in Cogliate (MB), ITALY. from Industrial Emissions - Water Cooled Portable Chiller Product line

Premium

JCT - Model JPES - Portable Gas Sampling Probe with JHSo Heated Sample Line

. Especially designed for:. Stack testers. Authorities (QAL 2). mobile back-up ...

By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Portable Product line

Premium

HI-Q - Model S-275, R-275, #415, MR-5, MR-8, MR-12 & SK25 - Dry Gas Totaling Meters

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet (connected on the vacuum side of an air sampling ...

By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Air Sampling Accessories Product line

Premium

FRITSCH - Model ANALYSETTE 18 - Heavy Duty Analytical Sieve Shaker

Particularly suitable for particle size analysis and portioning of coarse-grained ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Heavy Duty Analytical Sieve Shaker Product line

Premium

J.U.M. - Model VE7 - High Temperature Total Hydrocarbon Analyzer

Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and ...

By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Heated FID Analyzers - FIDs with Backpurge Filter Product line

Premium

J.U.M. - Model 2812D - Compact Sample Pump

The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have ...

By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Heated FID Analyzers - Sampling Accessories Product line

Premium

Isokinetic Heated Rotative Probe - TCR Tecora

More and more standards forced stack emission testers to adapt their equipment and the necessary devices to carry out correct pollutants sampling activity. Cooling-condensed molecules presence in the exhausts makes it necessary to heat the probe and all the connected devices. All the materials used therefore ...

By TCR-Tecora based in Cogliate (MB), ITALY. from Industrial Emissions - Sampling Probes Product line

Cal Check - Model 101 - Audit System

The 101 easily fits onto the lens barrel and locks in place with a thumbscrew. The iris is adjusted to simulate clear stack condition. Test filters are used to get a calibration ...

By Cal Check based in Raleigh, NORTH CAROLINA (USA).

Long Test-Ball / MS2 Test-Ball

Cherne's Long Test-Ball plugs are designed for waste stack testing—sealing the rise and the run to perform the test. These long ball plugs can also be used to seal the wye to conduct sewer air tests. Molded-in sealing ribs at each end of the plug ensure a leak-free ...

By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Pneumatic Plugs Product line

Cherne - Original Gripper Plug

Cherne's Gripper plugs can be used in a variety of applications including DWV (drain, waste and vent) testing and stack testing. End-of-Pipe design won't fall in, whereas the Inside-of-Pipe design allows you to locate the plug inside the pipe as far as you need. Time tested, the Gripper remains one of the most ...

By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Mechanical Plugs Product line

TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer

The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...

By Teledyne API based in San Diego, CALIFORNIA (USA). from Sulfur Compound Instruments Product line

Neptech Flexotherm - Heated Sample Lines

Flexotherm™ manufactures heated sample lines specifically for use in gaseous emissions sampling. The two primary sampling industries would be engine and stack testing. Our products meet or exceed all EPA guidelines for emissions sampling. We provide precise and even heating on all our products. ...

By Neptech Inc. based in Highland, MICHIGAN (USA). from Heated Products Product line