Stainless Steel Separation Equipment Near Tonga
-
Manufactured by Fox Environmental Systems Pty Ltdbased in AUSTRALIA
The Fox Oil Water Separator range is designed to provide solutions for companies generating waste water that will require treatment before disposal to the council’s sewer infrastructure, re-use systems or ...
-
Manufactured by FLSmidthbased in USA
Keeping a solid focus on your fine-particle separation needs; hen fine particle separation is of utmost importance, only small-diameter cyclones will provide that critical cut point. Our CP (Close-Packed) Vessels use cyclones from 13mm (0.5-in) up to 76mm (3-in) that maximize the unit’s separation abilities and provide a finer cut point ...
-
Manufactured by SAMPI S.P.A.based in ITALY
. They are basically built with our flow-meters and pumps contained inside a strong stainless or treated steel cabinet with a wide range of accessories such as hose reels, filter-water separator, extra by-pass for double flow-rates, mechanical and electronic read out, pulser, ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Infrared sensor SIR to measure the snow surface temperature. The compact infrared sensor SIR provides for the exact and non-contact measurement of the temperature of the snow surface. ...
-
Manufactured by PumpEng Pty Ltdbased in AUSTRALIA
The Raptor 5kW High Head Dewatering submersible pump offers a multitude of operating and cost saving benefits. The Raptor 5kW has a two part stator casing / junction box lid which reduces down time and on-going maintenance costs. Complete Flygt* stator casing change out kits are available. Flygt Interchangeable: BS ...
-
Manufactured by KELLER Pressurebased in SWITZERLAND
The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Impac IN 500 series includes the IN 510 and IN 520 and are digital pyrometers with miniature sensor heads for non-contact temperature measurement of non-metallic or coated metallic surfaces. Suitable for measuring temperature ranges between -40 and 700°C. Sensor head and cable usable in ambient temperature up to 85 or 180°C without cooling, dependent on the type. Field ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMP 308 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and mainten-ance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O - ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed ...
-
ShowcaseManufactured by Skim-pakbased in USA
skim-pak series 600 is designed to remove floating contaminants including oils, foams and particulates from limited access and smaller skimming ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 2000 skimmers are rugged, compact and portable for operation in sumps, tanks and pits, and separators. Capable of fitting through a 24” access, the Series 2000 skimmers utilize a unique self adjusting flow control eliminating manual adjustments. All of this results in a greater recovery of oil with less water and ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 4000 skimmers are rugged, compact and portable for operation in tanks, lagoons, ponds, lakes, rivers and harbors. Capable of fitting through any 24” access, the Series 4000 skimmers utilize a unique self adjusting flow control eliminating manual adjustments. This unique flow control will recover more oil and less water, resulting in higher overall recovery rates and ...
-
Manufactured by Diversitechbased in CANADA
The electric Immersion Separator Wet Mix Vacuum Cleaner from Diversitech is designed to safely vacuum explosive, combustible liquids and dusts. Our immersion separator system neutralizes explosive, conductive, and combustible dusts by submerging them into a neutralizing liquid bath, rendering them inert and eliminating any risk of ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Diameter 19 mm – ideal for deep wells. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe – piezo-resistive stainless steel measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement ...
-
Manufactured by bioteg Biofilter Systems GmbHbased in GERMANY
The biofilters of the series EKBF which consist of a stainless steel cladding with integrated separately removable and refillable biofilter cartridge have been designed and optimized specially as a complete system for odor reduction of waste water ...
-
Manufactured by Hankook Matics Co.,Ltd (HKM)based in SOUTH KOREA
This separator is for separating weak magnetic materials such as stainless steel by using very high intensity magnetic force. It can be reached 14,000 gauss on the drum face and suitable for separating SUS304 and SUS316 steel from shredded ...
-
Manufactured by ATO Automationbased in USA
This series of high temperature pressure sensors use a high-performance silicon piezoresistive pressure core as core element. The internal ASICs convert the mV signal into a standard current signal (4-20mA/0-20mA), voltage signal (0-5V/1-5V/0-10V) or RS485. Pressure sensor with stainless steel sealing structure has cooling fins, high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you