Stationary Sampler Equipment Available In Idaho
-
Manufactured by GIMAT GmbH Umwelttmesstechnikbased in GERMANY
The samplers FS / FSV according to ISO 5667 are specially designed for automatic sampling of surface waters and waste water. They have all the functions that are necessary for fully automatic ...
-
Manufactured by POL-EKO A.Polok-Kowalska sp.k.based in POLAND
Representative sample taking according to PN-ISO ...
-
Manufactured by 3S Analyzers S.r.l.based in ITALY
be combined with an optional, lockable, tamperproof Sampler Module Front ...
-
Manufactured by GIMAT GmbH Umwelttmesstechnikbased in GERMANY
The Efcon family of automatic samplers to ISO 5667, in a robust, double-walled plastic housing, are flexibly configurable, reliable and economical partners for all applications. The modern control unit Jazz allows time, quantity and event proportional sampling and time ...
-
Manufactured by 3S Analyzers S.r.l.based in ITALY
The AQUA-S320 for indoor applications only, is based around an high performance refrigerated cabinet. All electronic equipment is protected in the upper compartments, while collected samples are kept separately and securely in the lockable, temperature controlled, lower compartment. The AQUA-S320 can be used with the full range of Sample Collection Vessels, including Integral Bottlers, which are ...
-
Manufactured by ORI Abwassertechnik GmbH & Co. KGbased in GERMANY
The Stationary sampler is made of durable high quality stainless steel (AISI 304 optional AISI 316 Ti) for use in ATEX Zone 1 and 2 environments. The sampler has optional integrated cooling and heating and a choice of either a peristaltic or vacuum membrane pump system, dosing slide, ball valve or scoop technic. The sampler ...
-
Manufactured by Manning Environmental Inc.based in USA
Manning portable samplers provide accurate‚ repeatable sample volumes for a wide range of applications. Peristaltic sampler has a rugged NEMA 4X/NEMA 6 ABS housing with stainless steel hardware that stands up to the harshest sampling environments. These features‚ along with watertight connectors‚ ensure long service ...
-
Manufactured by Manning Environmental Inc.based in USA
The S5000’s Anti-Clog technology will keep your lines free, hard and/or particulates won’t damage it, and varying water levels won’t affect sample volume, so no need to re-calibrate. Available in single bottle configuration with 5/8” ID flow path and 1-liter chamber. Training for this unit is minimal so new personnel can be trained in minutes. Two control knobs are easy to ...
-
Manufactured by WaterSam GmbH & Co. KGbased in GERMANY
Whether for indoor or outdoor use, the WS 316 is an all-rounder that impresses with its generous storage space and expandability. It can be tailored for a wide variety of different sampling requirements and conditions, and can even be retrofitted later with other equipment. ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
The S200 is the simplest of the refrigerated Aquacell Stationary Wastewater Sampler range. Where an indoor refrigerated Sampler is required for a secure location the S200 is the perfect solution. As with every Sampler in the Aquacell range the S200 model incorporates the well proven and dependable Aquacell Module. ...
-
Manufactured by WaterSam GmbH & Co. KGbased in GERMANY
The WS 312 is a space-saving sampler for all standard indoor and outdoor applications. ...
-
Manufactured by Aysix Technologiesbased in CANADA
The four S300 Series variants centre around the same high performance Aysix S300 Cabinet. As with every Sampler in the Aysix Sampler range each S300 model incorporates the well proven and dependable Aquacell ...
-
Manufactured by WaterSam GmbH & Co. KGbased in GERMANY
to standards for ATEX Ex-Zone 2. As with other samplers, the samples can be safely stored at a preset temperature. The huge cost savings and advantages in quality relative to a fully Ex-certified sampler have made the WS 316 Ex 2 Interior the choice of market-leading international ...
-
Manufactured by Manning Environmental Inc.based in USA
Industry-standard, freestanding all-refrigerator tailored for the wastewater industry’s water sampler ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
The S50 is the simplest of the Aquacell Wall Mounted Samplers and is designed specifically for indoor applications. Being extremely compact the Aquacell S50 can be conveniently positioned adjacent to your effluent source. As with every Sampler in the Aquacell Sampler range the S50 model incorporates the well proven and dependable Aquacell ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
The S100 is the full specification Aquacell Wall Mounted Wastewater Sampler. Being extremely compact, the wall mountable S100 can be conveniently positioned adjacent to your effluent source, either indoor or out. As with every Sampler in the Aquacell range the S100 model incorporates the well proven and dependable Aquacell ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
The Aquacell S320H is the highest specification Aquacell model in the S300 Series of Wastewater Samplers. Incorporating Sample Refrigeration and Sample Frost Protection, the S320H is perfectly suited for outdoor applications where collected samples must be kept cool. As with the Aquacell S310H, the S320H is supplied with an additional ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
The Aquacell S310H is a non refrigerated Stationary version of the S300 Series of Wastewater Samplers. Incorporating Sample Frost Protection, the S310H is ideally suited for outdoor use. As with the Aquacell S320H, the S310H is supplied with an additional Upper Protection door. Being lockable this door gives a user the option of ...
-
Manufactured by Geonor ASbased in NORWAY
Effective sample length for the K-100 model is 700 mm. The sampler can be used on drilling rigs without disassembling rods and sampler between each sampling. The K-100 model is equipped with replaceable cutting head. One thin-walled head intended for undisturbed samples of silt and clay and one coarse head for sandy soil. Sand catcher can be ...
-
Manufactured by WaterSam GmbH & Co. KGbased in GERMANY
The WS 98 is a compact sampler for indoor applications that do not require cooling. It features the same range of functions as larger, stationary samplers. Typical WaterSam® quality and performance in a compact package. Housing made of high-value 316Ti stainless steel as standard; well suited for use in demanding environments. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you