Only show results available in Virginia? Ok

Steam Flare equipment

  • Premium

    AEREON - Steam Assisted Flares

    Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is ...

    By AEREON based in Austin, TEXAS (USA). from Onshore & Offshore Flares Product line

  • UOP Callidus - Inner Steam Flares

    The internal steam flare and the internal steam super sonic flare represent significant improvements over traditional internal steam designs.

  • UOP Callidus - Upper Steam Flares

    Upper steam flare tips incorporate a high-stability pilot and a flame retention system. With a high efficiency, low noise steam injection ring, the flare tip provides smokeless burning with lower noise than traditional steam injection systems. The upper steam injection is mechanically superior in design while providing greater flow at lower steam ...

  • GCT Steam Flares

    The GBA GCT series flare tip is a robust and flexible design that is routinely used on refinery and chemical plant duty. It's principal means of steam injection is via the upper manifold. This uses a number of injector nozzles located on a manifold positioned around the tip circumference to inject steam at high pressure directly into the flame. ...

    By GBA Flare Systems based in Burnham, UNITED KINGDOM.

  • Steam Assisted Flares Systems

    Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground flare ...

    By Europem N.V based in Lier, BELGIUM. from Elevated Flares & Ground Flares Product line

  • Steam Assist Flares

    If your plant has a steam boiler, steam assisted flares are the ideal method for smoke free flaring. Compared to air assisted flares, steam flares have a lower capital cost and a wider operating range. High pressure steam (40-150 psi) is injected into the flame zone above the flare tip. The steam inspirates air into combustion zone to provide ...

    By Hero Flare LLC based in Bastrop, TEXAS (USA). from Smoke Free Flares Product line

  • Premium

    AEREON - Utility Flares

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two ...

    By AEREON based in Austin, TEXAS (USA). from Onshore & Offshore Flares Product line

  • Premium

    AEREON - Air-Assist Flares

    Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving ...

    By AEREON based in Austin, TEXAS (USA). from Onshore & Offshore Flares Product line

  • ITAS - Enclosed Ground Flares

    Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes ...

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY. from Flares Product line

  • Utility Flares

    Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and ...

    By Europem N.V based in Lier, BELGIUM. from Elevated Flares & Ground Flares Product line

  • Air Assisted Flares

    Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip ...

    By Europem N.V based in Lier, BELGIUM. from Elevated Flares & Ground Flares Product line

  • UOP Callidus - Air Assisted Flare

    The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of forced draft air cools the tip and prevents flame pull down in high wind conditions.

  • Callidus - Hemisflare

    The Callidus Hemisflare tip design is a breakthrough in modern flare technology. Through the use of computational fluid dynamics (CFD) modeling and physical testing, a new method of flare gas combustion has been created. We’ve incorporated a Coanda design with enhanced ridges that has increased the flare gas and air mixing while enabling ...

  • UOP Callidus - Totally Enclosed Ground Flare

    UOP Callidus Totally Enclosed Ground Flare (TEGF) system was originally designed to eliminate light and noise from flaring waste gases. This flare has been used extensively in the combustion of waste gases from chemical plants, hydrocarbon loading terminals, FPSO floating production vessels, refineries, and any other application where low ...

  • UOP Callidus - Flare Gas Recovery (FGR) Unit

    UOP Callidus Flare Gas Recovery (FGR) technology offers you an easy way to address growing environmental, commercial and public relations concerns regarding flaring and flare emissions. FGR technology gives your facility the ability to “recycle” flare gas. The system provides a direct reduction in emissions. In addition to ...

  • Premium

    Anguil - Model VCU - Vapor Combustor Unit

    Thermal flaring technologies used for the destruction of Hydrocarbons, Volatile Organic Compounds (VOCs) or Hazardous Air Pollutants (HAPs) are designed in two basic configurations; open and enclosed flame burners.  Recent regulations on visible emissions, vapor radiation, Greenhouse Gases (GHGs) and noise pollution have driven industry away ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Thermal & Catlytic Oxidizers Product line

  • ITAS - Demountable Flares

    Demountable flares are used when locating several flares in a limited available plot plan is critical, while limiting plant shut-down costs for maintenance. From design, engineering, fabrication, supervision and training, Fives offers up to 200 meters demountable flares systems.

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY.

  • Combustion Research Associates - Sonic Utility Flares

    Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. We also manufacture low flow flares and sonic flares with high-pressure tips to reduce emissions and provide cost effective ...

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

  • CAF Air Assisted Flares

    Where there is a need for smokeless combustion of low pressure, heavy waste gases but no steam is available then GBA Flare Systems CAF air assist flares can be used. CAF air assist flares use forced draft air to create turbulence and to supply the requisite primary air into the base of the flame thus achieving a clean, upright flame. For CAF air ...

    By GBA Flare Systems based in Burnham, UNITED KINGDOM.

  • Enclosed Ground Flare

    Enclosed Flares (VCUs) designed and manufactured by Combustion Research Associates offer smokeless flaring of various pollutants such as Hydrocarbon gases and vapors, Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs). With a concealed flare, these stacks pass stringent regulations against visible emissions, vapor radiation, ...

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you