We couldn't find any steam turbine equipment suppliers or service providers located in Kenya

Here is a list of equipment results with suppliers serving Kenya

steam turbine Equipment available in Kenya

  • CTMI Steam Turbines - Model PS and MS Series - Steam Turbines

    CTMI offers Single stage and Multistage Steam Turbines models that cover the range of Power from 5 kW to 30000 kW. Single stage turbines have been a fixture in most of the process industries meeting their process requirements and also serving with Power. CTMI also offers one of its kind Single Stage Condensing Turbines.High fuel and high energy ...

    By Chola Turbo Machinery International Pvt Ltd based in Bangalore, INDIA.

  • Elliott - Model YR - Steam Turbines

    Elliott YR steam turbines are globally renowned for performance in a wide range of services.They are known for quality, reliability, and adaptability, operating for decades in conditions ranging from humid tropical heat and rainfall to freezing icy tundra and snowfall. Around the world, YR turbines are on the job driving pumps, compressors, fans, ...

    By Elliott Group based in Jeannette, PENNSYLVANIA (USA). from Steam Turbines Product line

  • Model SCF 10 MW - 100 MW - Steam Turbines

    Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct ...

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Model SRCF 30 MW - 150 MW - Steam Turbines

    Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. ...

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Skinner - Model SK25 - Steam Turbine

    In turbine applications where rugged and dependable performance is critical to your operation, the wise choice is a Skinner SK25 Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for their unique operations within an ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model S23 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner S23 Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for their ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model S28 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner S28 Single-Stage Steam Turbine.  Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model SB18 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner SB18 Single-Stage Steam Turbine.  Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Siemens - Model SST-9000 - Steam Turbine

    Steam turbines of the SST-9000 series are typically operated in power plants with a power output of up to 1,900 MW. They feature a double flow high-pressure (S) cylinder and up to 3 double flow low-pressure (L) cylinders with shrunk on disk rotors for 25 and 30 Hz.

    By Siemens Power Generation based in Erlangen, GERMANY. from Steam Turbines Product line

  • Skinner - Model S18 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner S18 Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment. As a result, they gained power solutions for their unique ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model SBV18 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner SBV18 Vertical Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment. As a result, they obtained power solutions for ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model S11 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner S11 Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for their ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Siemens - Model SST-050 Series - Steam Turbines

    The SST-050 (formerly known as AF or BF series) is a single-stage, back pressure steam turbine in which the flow passes axially through the blading. It is mainly used as a power source for pumps or fans and especially as a stand-by unit with quick-start capability.

    By Siemens Power Generation based in Erlangen, GERMANY. from Steam Turbines Product line

  • Skinner - Model SB11 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner SB11 Single-Stage Steam Turbine.  Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Model DC / SL - DL 50 MW - 250 MW - Steam Turbines

    Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although ...

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Skinner - Model SB23 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment. As a result, they obtained power solutions for their unique ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Model HIC / DL - ML 100 MW - 500 MW - Steam Turbines

    This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles ...

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Model DHI / DL - ML 300 MW - 850 MW - Steam Turbines

    Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction blading.

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Steam Turbines

    A steam turbine is a device that converts the heat energy in captured, pressurized steam, and converts it to mechanical energy. A steam turbine generator works by heating water to extremely high temperatures until it is converted into steam, then the steam energy is used to rotate the blades of a turbine to create mechanical or rotational energy. ...

    By Tuba Turbine GmbH based in Frankfurt am Main, GERMANY.

  • Steam Turbine

    Large amounts of biogas (for example by using waste from food processors) can be used to produce steam. Steam can be used as heat or to turn a steam turbine which is able to produce electric power.

    By Biogas Direct LLC based in Sauk City, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you