We couldn't find any steel submersible pump equipment suppliers or service providers located in Vatican City

Here is a list of equipment results with suppliers serving Vatican City

steel submersible pump equipment available in Vatican City

  • Premium

    Piranha - Corrosion Resistant Pumps

    Piranha 316 stainless steel submersibles feature recessed impellers for extra solids handling capability while minimizing abrasive wear. The majority of material pumped never comes in contact with the impeller. Mechanical seals are abrasion resistant silicon carbide. All wetted metal components are 316 stainless steel except the rotor shaft which ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Corrosion Resistant Pumps Product line

  • Premium

    Piranha - Model FP Series - Floating Industrial Duty Pumps

    Our Piranha FP Series Floating Platforms are designed for floating industrial duty pumps in water removal, water supply, or solids removal applications. Our FP series floats feature high strength tubular steel, a urethane oven baked powder coat finish, modular hi-density polyethylene foam filled floats, and stainless steel fasteners. Floating ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Floating Industrial Duty Pumps Product line

  • Premium

    ASTIM - Model KUM - Travelling Scraper

    Traveling scrapers “KUM” for single, twin or triple type basins manufactured as full wall, half wall, steel profile or truss beam according to static calculations and requirements. The system consists of a traveling gantry over the channel which carries the grit and grease removal systems. Bridge is mounted on end carriages at both ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Travelling Scraper Product line

  • Premium

    ASTIM - Central Driven Scraper

    Central Driven Scraper “CRS” with two, three or four scraper arms are manufactured for installation at pier supported or peripheral carried concrete or steel structure bridges. The scraper blades are mounted on arms which are connected to a rotating shaft. Central driven type scrapers are generally used in cross flow square concrete ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Central Driven Scraper Product line

  • Model F series - 4" Submersible Pump

    Multi-stage pumps built in section with radial or semi-axial floating impellers. Impellers and diffusers in Noryl or polycarbonate with stainless steel AISI 304 wear rings. Pump exterior totally in stainless steel AISI 304. Shaft in stainless steel AISI 304. Vertical or horizontal installation. Coupling: NEMA standard.

    By Joval Pumps based in Fafe, PORTUGAL. from 4" Submersible Pump Product line

  • Booster Sets

    Booster sets for electric submersible pumps made of stainless steel or galvanized steel for horizontal or vertical installations, well suited not only to new systems but also to existing pipelines. Caprari’s experience in making electric submersible pumps for every field of application has been applied to these niche installations and is the ...

    By Caprari S.p.A. based in Modena, ITALY. from Booster Sets Product line

  • Tuffa - Model 3500VBFS - Bunded Fuel Stations

    Complete with: 2' BSP fill connection c/w cap and chain, Vent, Contents gauge, A H&S approved low level fill point cabinet to house all appropriate equipment (lockable doors), A submersible pump * 240 volt, A digital flowmeter, 4 metres of delivery hose and automatic shut off nozzle, 10 micron filtration, Nozzle holster, Bund / overfill alarm ...

    By Tuffa UK Limited based in Uttoxeter, UNITED KINGDOM. from Bunded Fuel Stations Product line

  • Model TWU - Stainless Steel Submersible Well Pumps

    Design: 4” Submersible Well Pumps with Noryl Impellers.

    By Wilo USA LLC based in Rosemont, ILLINOIS (USA). from Stainless Steel Submersible Well Pumps Product line

  • Model CSS Series - Horizontal Openwell Submersible Pumps

    These centrifugal pumpsets are ideally suitable for openwells or tanks where there is a wide fluctuation in water level occur. This works under water and it rests at bottom of the well. Hence suction and priming problem do not arise. Pump’s volute chamber is designed to give the best possible hydraulic efficiency. Dynamically balanced ...

    By C.R.I. PUMPS (PVT) LIMITED based in Saravanampatty, INDIA.

  • Model UGM-Series - Submersible Motors

    The UGM 4' submersible motors of Swiss Pump are fully stainless steel, rewind able and water-cooled. UGM 6“, 8“, 10“ are made of cast-iron top and bottom with epoxy-coated paint. The other parts are of stainless steel SS304. Motors for high water temperature up to 90°C and motors made of only stainless steel SS316 are ...

    By Swiss Pump Company AG based in Thun - Gwatt, SWITZERLAND.

  • Model T-T100 - Submersible Drainage Pumps

    The T-T100 is a submersible drainage pump for clean water suitable for domestic and industrial use, tank filling and many other applications. 0.37-0.9kW, 8m maximum head and 160l/min maximum capacity. The T-T100 is a submersible drainage pump for clean water, with non-abrasive particles (max. solids bodies: 5mm). It has a stainless steel body, ...

    By T-T Pumps Ltd. based in Woore, UNITED KINGDOM. from Submersible Drainage Pumps Product line

  • Model 4 - Submersible Pumps

    Submersible pumps of FP4 series are of new design, very solid and compact, easy to maintain. The supports, stainless steel AISI 304, obtained with wax casting process, ensure great robustness and reliability of the product. The new design of independent floating impeller, patented, guarantees a low axial load on the motor. The new materials used ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Pumps Product line

  • Model AUP Series - Submersible Water Pumps

    Stainless Steel Motor Housing. Fiberglass Reinforced Engineering Composite Body. Detachable Base Strainer. Non-Clog Vortex Impeller For Free. Passage of Large Solids & Fibers. Continuous Duty Submersible Pump.

    By Alita Industries Inc. based in Arcadia, CALIFORNIA (USA). from Submersible Water Pumps Product line

  • Pompe Rotomec - Model CF – CV - Submersible Pump

    Submersible pumps in stainless steel and vertical delivery port, open impeller (CF) or Vortex impeller (CV) and port of discharge vertical. Motor cooled by the pumped water passing between the motor jacket and the external jacket Max liquid temperature 50°C.

    By Pompe Rotomec Srl based in Cernusco S/N, ITALY. from Submersible Pump Product line

  • Model DIVER series - Submersible Pump

    5” multistage submersible pumps with outer casing in AISI 304 stainless steel; encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Cooling of the pump is ensured by the pumped liquid. The radial centrifugal ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Pump Product line

  • Model MICRA series - Submersible Pump

    3” centrifugal submersible pumps for wells consisting of 3GF series canned motors coupled with multistage pumps; discharge and bracket made of brass, outer casing, pump shaft and cable protector made of steel, diffusers and impellers made of technopolymer; the special construction of the canned motor guarantees maximum safety in the most ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Pump Product line

  • SEPFLOAT - Model G4 F03 - 4` Pumps Deep Well Submersible Pumps

    Stainless steel body, multistage, noryl floating impeller, suitable for nema standard motor, clean water submersible pumps

    By Goksan Pompa Sanayi ve Ticaret A.S. (SEP) based in Cigli - Izmir, TURKEY. from 4` Pumps Deep Well Submersible Pumps Product line

  • ESPA - Model Drain 100 - Submersible Pumps

    Submersible pumps for the drainage of water without solids in suspension. Materials: Discharge body and upper mounting in cast iron. Impeller in tecnopolomer. Double mechanical seal in ceramic/grafito/NBR. Filter in rigid plastic. Motor housing and transport handle in stainless steel AISI 304.

    By Espa Pumps (UK) Ltd based in Essex, UNITED KINGDOM. from Submersible Pumps Product line

  • Model Draincor - Submersible Grinder Pumps

    Submersible grinder pumps, for sewage water, with filaments. Materials: Pump body, discharge body, suction body and impeller in cast iron. Dilacerative system in steel F-520. Mechanical seal in silicon carbide and graphite. Pump base in stainless steel AISI 304, detachable for coupling of accessories. O’rings in NBR. Motor shaft in stainless ...

    By Espa Pumps (UK) Ltd based in Essex, UNITED KINGDOM. from Submersible Grinder Pumps Product line

  • Model TE series - Vertical Submersible Pump

    In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the construction design, the use of bearing and shaft seals can be ...

    By SCHMITT-Kreiselpumpen GmbH & Co. KG based in Ettlingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you