stormwater treatment system Equipment in France

10 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: stormwater treatment system ×

  • In: Europe ×

  • In: France ×

LIPD - Silt Storage System

by Simop     based in Sainte-Mère-Eglise, FRANCE

The silt storage is a device designed to separate and store heavy matter (sand, gravel, silt) contained in raw water before their passage in greases separator or oil separator. When it's placed upstream to a greases separator it permits to lower the temperature of collected water come from kitchen

Model RSU - Combined Sewer Overflow Screen

by ROMAG aquacare ag     Distributor in Villeurbanne, FRANCE

The CSO screen RSU, fitted horizontally between the discharge culvert and the relief sewer, reliably retains all visible solids when the excess water flows through.

Model RSO - Combined Sewer Overflow Screen

by ROMAG aquacare ag     Distributor in Villeurbanne, FRANCE

The CSO screen RSO, fitted horizontally between the discharge culvert and the relief sewer, reliably retains all visible solids when the excess water flows through.

Model RSW - Combined Sewer Overflow Screen

by ROMAG aquacare ag     Distributor in Villeurbanne, FRANCE

The CSO screen RSW, fitted vertically between the discharge culvert and the relief sewer, reliably retains all visible solids when the excess water flows through.

Model RSW-K - Combined Sewer Overflow Screen

by ROMAG aquacare ag     Distributor in Villeurbanne, FRANCE

The CSO screen RSW-K, fitted vertically between the discharge culvert and the relief sewer, reliably retains all visible solids > 4 mm when the excess water flows through horizontally. It is mounted on the owner‘s prepared concrete sill. The height of the sill depends on the hydraulic survey. Type RSW-K is a combination of Type RSW and a ...

Groundwater Filtration

by BakerCorp     Office in Notre Dame de Gravenchon, FRANCE

The diagram below shows a groundwater treatment system in which turbid,contaminated stormwater can be removed from a industrial jobsite before new construction begins. The clean effluent is then suitable for discharge to a municipal storm drain system or elsewhere.

Model KDA - Doppler Pipe Sensor

by NIVUS GmbH     Office in Sessenheim, FRANCE

KDA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The pipe sensors are designed for installation in pipes from the outside using a nozzle. Combined with transmitter types such as PCM F and without OCM F the result is a complete flow measurement system.

Model KDA - Doppler Wedge Sensor

by NIVUS GmbH     Office in Sessenheim, FRANCE

KDA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for installation on either the channel wall or the channel bottom. Combined with transmitter types such as PCM F and OCM F the result is a complete flow measurement system.

Pipe Measurement Section

by NIVUS GmbH     Office in Sessenheim, FRANCE

For flow measurement and discharge control. Available with various diameters and lengths. For sensor installation for reliable flow detection in part-filled and full pressurised pipelines.

Model POA - Correlation Wedge Sensor

by NIVUS GmbH     Office in Sessenheim, FRANCE

Medium measurement range for levels up to ca. 1m. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for ...

Need help finding the right suppliers?

Let the XPRTs do the work for you