Strainer Equipment Near Virginia
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RW and 206-RW series control valves offer superior corrosion resistance performance in grey or reclaimed water applications and can be used in all standard and special applications. It’s constructed from materials which are selected specifically to address corrosion concerns from chlorine, chloramine, and other corrosive elements typically found in grey or reclaimed ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Reinforced Basket Strainer on Foot Valves. Vertical or Horizontal Mount. Standard Connection is IPS Solvent Weld. Optional Connections on Foot Valves include: 45° Solvent Weld, Flanged, 45° ...
-
Manufactured by Marathon Equipment Companybased in USA
Closed-End Horizontal Balers are ideal for multi-material processing. The ram packs the material in the compaction chamber and the bale is ejected through the end. The gate operates hydraulically. Closed-End Horizontal Balers are mid-sized, closed-end balers that processes a wide variety of material and can produce up to 20 tons of OCC in a typical day's shift. Several models are available with ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Polypropylene floor drains (available in Adjustable and ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer 106/206-2PR-630 Pressure Management Valve is a simple package to save water loss and money. It meets system needs by providing higher pressure when called for 24/7 and reduced pressure to save water leakage (and money) at all other times. An orifice with a low pressure drop 1.0 psi, (0.07 Bar) is installed upstream of a standard pressure reducing valve fitted with an extra pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-R and 206-PR-R pressure reducing and pressure sustaining valves are based on the 106-PG or 206-PG main valve with the addition of the sustaining pilot 81-RP and pressure reducing pilot PR-160. Provided the upstream pressure setting is satisfied, the 81-RP pilot is kept open, permitting the valve to be controlled by the 160 pilot. The 160 pilot senses downstream pressure and under ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed, when the pressure returns below ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined demand. At the desired maximum set-point, the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-F-Type 5 non-modulating float valve is based on the 106-PG main valve. It is ideal for allowing normal forward flow to fill water tanks to a desired high level and where the pilot and valve of the storage tanks are easily accessible. The valve functions as a two-position valve, either open or closed. The valve remains closed when the tank level drops, until the float reaches the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-8700 pressure relief valve, which is UL / FM labelled and listed, automatically relieves excess pressure in the fire protection system to discharge. The RPS series valves will also automatically modulate to relieve excess pump capacity during pump start up and shut down, allowing the pump to operate without causing surges. These relief valves are based on the 106-PG or A106-PG main ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
THE IPEX SYSTEM ADVANTAGE: Introducing IPEX vinyl process piping systems – A complete line of pipe, fittings, flanges, strainers and valves to meet all your process system requirements. IPEX manufactures the Xirtec® PVC and Xirtec® CPVC systems to meet industry demands for a complete Pipe, Valves and Fittings (PVF) ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Sediment Strainers designed to trap suspended particles flowing in the process ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
A complete line of pipe, fittings, flanges, strainers and valves to meet all your process system ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you