Only show results available in Virginia? Ok

submersible axial pump equipment

  • Premium

    ASTIM - Model PST - Central Driven Stirer

    Central Driven Stirrer “PST” is designed to be used for Circular Vortex Grit Chambers. The Vortex Grit Chamber’s guided flow pattern represents another breakthrough in grit removal technology. The inlet and outlet channels are designed in such a manner to guide the flow to obtain vortex. The Central Driven Stirrer repeatedly ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Central Driven Stirer Product line

  • Model F series - 4" Submersible Pump

    Multi-stage pumps built in section with radial or semi-axial floating impellers. Impellers and diffusers in Noryl or polycarbonate with stainless steel AISI 304 wear rings. Pump exterior totally in stainless steel AISI 304. Shaft in stainless steel AISI 304. Vertical or horizontal installation. Coupling: NEMA standard.

    By Joval Pumps based in Fafe, PORTUGAL. from 4" Submersible Pump Product line

  • Vertical Turbine & Submersible Pumps

    Baked-On Porcelain Lining. Enhances efficiency. Connections. 6” and 8” models are threaded bowls and all other models are bolted bowls. Rib Reinforced Flange. Adds strength and rigidity to bowl to withstand installation and transportation. stresses. Registered Fit. Maintains essential axial alignment

    By American Turbine based in Lubbock, TEXAS (USA).

  • JC Series (J Series)

    JC Series portable submersible pumps by Gorman-Rupp are excellent for sewage bypass and other solids-handling applications. These pumps are designed specifically for trash handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature ...

    By Gorman-Rupp Co. based in Mansfield, OHIO (USA). from JC Series (J Series) Product line

  • Model CSS Series - Horizontal Openwell Submersible Pumps

    These centrifugal pumpsets are ideally suitable for openwells or tanks where there is a wide fluctuation in water level occur. This works under water and it rests at bottom of the well. Hence suction and priming problem do not arise. Pump’s volute chamber is designed to give the best possible hydraulic efficiency. Dynamically balanced ...

    By C.R.I. PUMPS (PVT) LIMITED based in Saravanampatty, INDIA.

  • Axial-Flow Submersible Motor Pump

    Capacities up to 50000 cu.mtr./hr. Heads up to 20 mtrs. Motors upto 1500 kw and more. Compact unit in mono-block design. Wide range of duties. With wet and dry motor options..

    By Gruppo Aturia SpA based in Gessate (Milano), ITALY. from Axial-Flow Submersible Motor Pump Product line

  • Model ECONO-4 4 - Submersible Multi-Stage Pumps

    These types of pumps are suited for open wells with a minimum diameter of 100 mm. It’s a very compact pump, easy to install and of easy maintenance. It can pull out water till minimum level of 50 70 mm. A double mechanical seal with oil chamber, together with pumping water coling allow the motor a long life. This patented new design of ...

    By f.el.som. Middle East based in Sharjah, UNITED ARAB EMIRATES.

  • Model 4 - Submersible Pumps

    Submersible pumps of FP4 series are of new design, very solid and compact, easy to maintain. The supports, stainless steel AISI 304, obtained with wax casting process, ensure great robustness and reliability of the product. The new design of independent floating impeller, patented, guarantees a low axial load on the motor. The new materials used ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Pumps Product line

  • Model S12M - 12” Hydraulic Submersible Axial Flow High Volume Pump

    The S12M is designed for pumping high volumes of water at low to medium heads. This pump is great for lake draining, flood control, drydock, foundation and cofferdam de-watering.

    By Hydra-Tech Pumps based in Nesquehoning, PENNSYLVANIA (USA). from 12” Hydraulic Submersible Axial Flow High Volume Pump Product line

  • Hidrostal - Axial Flow Submersible Pumps

    Pumps made for low head applications. The Hidrostal axial flow pump is designed for low head applications up to 15m, and flows from 30 to 1400 l/s. It is commonly used when large volumes of liquid have to be transferred at relatively low lift conditions for applications such as Land Drainage Pumping Stations. An axial-flow pump is simple in ...

    By Hidrostal Holding AG based in Neunkirch, SWITZERLAND. from Axial Flow Submersible Pumps Product line

  • Stainless Steel Axial Flow Submersible Storm Water Pumps

    Carry's Stainless Steel Axial-Flow Submersible pumps are an economical solution for high-volume, low-head flow applications.  The Carry line offers single pumps with the capacity for 50 to  2,800 GPM at 2 to 25 feet of total dynamic head.  These pumps are also efficient and economical in parallel use for larger volumes.

    By Carry Manufacturing, Inc. based in Caro, MICHIGAN (USA).

  • Griffin - Hydraulic Driven Submersible Pumps

    Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4” to 24” with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to ...

    By Griffin Dewatering Corporation based in Houston, TEXAS (USA). from Hydraulic Driven Submersible Pumps Product line

  • Model S6P - 6 Hydraulic Submersible Axial Flow High Volume Pump

    The S6P is a lightweight axial flow pump designed for pumping high volumes of water at relatively low heads. The propeller design allows this pump to driven by small hydraulic power sources such as small tractors, backhoes or our 10 to 15 HP power units. This pump is great for lake draining, tank filling, flood irrigation, arial firefighting and ...

    By Hydra-Tech Pumps based in Nesquehoning, PENNSYLVANIA (USA). from 6 Hydraulic Submersible Axial Flow High Volume Pump Product line

  • Model S18M - 18” Hydraulic Submersible Axial Flow High Volume Pump

    The S18M is designed for pumping high volumes of water at low to medium heads. The mixed flow impeller allows this pump to be used in a wide range of applications including lake draining, stream by-pass, flood control, drydock, foundation and cofferdam de-watering

    By Hydra-Tech Pumps based in Nesquehoning, PENNSYLVANIA (USA). from 18” Hydraulic Submersible Axial Flow High Volume Pump Product line

  • Soggia - Model 4FR - 4" Borehole pumps

    Series of submersible pumps 4 'newly developed, designed and built for maximum resistance against sand (up to 250 g / m³) and other impurities. Materials certified for use in drinking water that allow the pump to run dry without even deteriorate. The supports are made of steel AISI 304, obtained with casting process, ensure extreme robustness and ...

    By Soggia Water Pumps based in Abano Terme, ITALY. from 4" Borehole pumps Product line

  • Bizzi & Tedeschi - Model 6TN Series - 6 Submersible Electric Pumps

    Manufactured completely in Bizzi & Tedeschi factory located in Campegine-Italy, thanks to the use of fine quality materials and construction which takes care of details, this product meets low cost and long life requirements. The duration especially represents an element which is much greater than similar products of competitor brands.The 6TN ...

    By Bizzi & Tedeschi S.r.l. based in Campegine (Reggio Emilia), ITALY. from 6 Submersible Electric Pumps Product line

  • Panelli - Model Series 180 RX - Radial Electric Submersible Pumps

    The radial pumps have a very limited axial dimension of every stage (impeller, diffusor, diffusor over). For this reason the radial solution allows to use a lot of stages and obtain, with the same well diameter, high head with small and medium capacity.­ PANELLI production offer standard radial pumps 8” in the version Completely ...

    By Panelli s.r.l. based in Spinetta M.go (Alessandria), ITALY.

  • Submersible Motor

    3'' types: asynchronous, bipolar; s.steel, external jacket; F class insulation; IP58 protection. Threephase or singlephase with capacitor start; voltage, current, frequency, power and torque data according to international rules. Coupling to body pumps according to NEMA STANDARDS; axial load to be coupled in compliance with hydraulic performances. ...

    By PRIMA POMPE - by FINVALORI based in Casarsa (PN), ITALY.

  • The KMA 333 Hydraulic Submersible Pump

    The KMA 333 is of the axial flow design, with impeller pitch adjusted to maximize its efficiency when transferring viscous products at moderate to high-head conditions (up to 265 feet). The pump features a stainless steel intake, impeller, stator, and plenum, and can be outfitted with a stainless steel motor for use with aggressive chemicals ...

    By Marine Pollution Control Corporation based in Detroit, MICHIGAN (USA).

  • APD - Model S3M - Submersible Motor

    S3M: Pressed Brass coupling flange 3' according NEMA rules Outer shell of SSAISI304.Stud-bolt, washers and nuts for pump coupling of SS AISI304 Shaft extension of SS Duplex ® Power: single-phaseO,37Kw-1,1Kw three-phase 0,37Kw -1,1 Kw Voltage: single-phase 230V ± 10% 50Hz o 60Hz.three-phase 230V or 400V ± 10% 50Hz o 60Hz Axial ...

    By APD Technology srl based in Chiarano (TV), ITALY. from Submersible Motor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you