We couldn't find any submersible motor equipment suppliers or service providers located in Lebanon

Here is a list of equipment results with suppliers serving Lebanon

submersible motor equipment available in Lebanon

  • Premium

    Mellegard & Naij - Model RK - Grinder for Solids in Water, Sludge & Waste

    Robust stainless steel construction. Can be used for both wet and dry applications. Can be flange pipe mounted as well as open in channels or chutes. Can be combined with compactors and screens to increase each machines efficiency. High material capacity. Easy changeable drive unit, shaft extension, submersible motor, hydraulic motor. Grinder RK ...

    By Hydria Water AB based in Borås, SWEDEN. from Grinder for Solids in Water, Sludge & Waste Product line

  • Model MTR BLM-SB-073S-60 - Brushless Submersible Motor

    SunPumps SCS series submersible pump motors incorporate the latest in high efficiency, permanent magnet, sensorless brushless DC technology. The motor windings are epoxy sealed and there are no electronics inside the motor thus eliminating the possibility of water damaging the controller. The motors are constructed of corrosion resistant, 304 and ...

    By SunPumps, Inc. based in Safford, ARIZONA (USA). from Brushless Submersible Motor Product line

  • Model MX-GI - Submersible Mixers

    These mixers are ideal for mixing and homogenization of liquids and are the result of our long experience in water treatment. Different rotation speeds, obtained using multipole motors, propellers with self-cleaning profiles and two or three blades, outside components in cast iron, make mixers MX-gi suitable for a wide range of application, with ...

    By SCM Tecnologie based in San Giorgio (MN), ITALY. from Submersible Mixers Product line

  • Aqua-Hobby - Floating Surface Aerator with Submersible Motor

    Ihe motor of this model hangs under the well-proven square float (as used tor the Aqua-Hobby). The surface area of ihe screen (stainless steel screen basket, stan-dard bar spacing 9.5 mm - also available with 5.5 mm bar spacing) has been considerably enlarged. This aerator is less prone to clogging,making it more reliable! The stainless steel ...

    By LINN Gerätebau GmbH based in Lennestadt-Oedingen, GERMANY.

  • Gorman-Rupp - Model SF Series (Infinity) - Submersible Solids-handling Pumps

    Gorman-Rupp SF Series submersible solids-handling pumps are designed to provide you with the ultimate in pumping performance. All SF Series pumps use NEMA Premium Efficiency motors and pass a minimum 3' spherical solid. Vortex pumps use the patent-pending Staggerwing impeller technology. SF Series submersible solids-handling pumps are available in ...

    By Gorman-Rupp Co. based in Mansfield, OHIO (USA). from Submersible Solids-handling Pumps Product line

  • Simflo - Submersible Pumps

    Simflo's discharge elbows are fabricated steel and are provided with a class 150 ANSI raised face flanges of the same diameter as the column pipe. The discharge elbow has an integral steel base drilled for flange mounting and lifting lugs of sufficient strength to lift the entire head, column pipe and pump/motor assembly safely for installation ...

    By Simflo Pumps Inc based in Willcox, ARIZONA (USA).

  • Submersible Solids Handling Pumps

    Cornell's Submersible pumps maintain superb operating efficiencies and are coupled with premium efficient motors. All come standard with heavy walled volutes for extended life under abrasive service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and Stainless Steel upper and intermediate guide ...

    By Cornell Pump Company based in Clackamas, OREGON (USA).

  • Borewell Stainless Steel Pumps

    Stainless Steel Submersible Motor & Pumps for Deep Wells 100 mm.

    By Sharp Sales & Service based in CHENNAI, INDIA.

  • Hydromatic - Model S Series - 3` Discharge Submersible Solids Handling Pumps

    3' Discharge Submersible Solids Handling. Key Features: Oil Filled Motors - Cooler operating than air filled motors and continuous lubrication of the bearings for longer life. Slip Fit Stators - For easy of service. Seal Cord Entrance - Triple seal protection, prevents moisture entry for longer life. Available configurations, rails and ...

    By Hydromatic pump based in Ashland, OHIO (USA). from 3` Discharge Submersible Solids Handling Pumps Product line

  • Longtech - Submersible Root Blower

    Compact. Much quieter when submerged, without the need for added soundproofing. Strict management of quality standards. For convenience, the motor and blower’s body are connected as one to avoid conveyor installation. Both motor and the blower are entirely sealed with an o-ring to ensure waterproofing and a special outer case can easily be ...

    By Longtech Machinery Industry Co., Ltd. based in Luchu Hsiang, TAIWAN.

  • Sydex - Model E Range Vertical API 676 - Vertical Progressing Cavity Pumps

    The highly versatile vertical ‘E’ range pumps are also known as barrel emptying, vertical sump or semi-submersible pumps. Vertical pumps are suitable for numerous applications within the oil and gas, and chemical industries where high suction lifts (low NPSHa) are an issue. The pumps can be directly mounted inside a tank, keeping the ...

    By Sydex srl based in Lonigo (VI), ITALY.

  • Plad - Model SBM Type - Submersible Pump

    Plad Submersible Pump.Industrial type submersible pump featuring a cast iron volute and a stainless steel fabricated impeller.Available from 4 In. (150mm) to 10 In. (250mm) Nominal speed from 900 to 3600 Rpm.A heavy duty submersible pump featuring a centralized discharge flange and a stainless steel to corrosive resistant impeller.Stainless steel ...

    By Plad Equipment Ltd. based in Bois des fillions, QUEBEC (CANADA). from Submersible Pump Product line

  • Model PC-AL - Site Submersible Pump

    Temperature of pumped liquid from 0 to 40°. 3-phase motor 400 V. 50 Hz. 3000 rpm. Protection by thermistor. With 10 or 20 m of cable according to model. Threaded outlet from 0 50 mm to 80 mm according to model. Maximum admissible particle size : 0 8.5 mm. Motor housing aluminium, stainless shaft. Tightness by double stuffing box. Agitator on ...

    By Pompes Japy based in FESCHES-LE-CHATEL, FRANCE. from Site Submersible Pump Product line

  • Subteck - Model RI 4 and 6 - Submersible Pumps

    Submersible pumps for deep wells of 6inch or greater diameter. Sized for connection to 4” Franklin motors up to 7.5 kw and 6” Franklin motors to 37 kw. Flow rates from 50 lpm to 950 lpm. Heads up to 350 m3/hr. Recommended for pumping clean water with a sand content no higher than 100 g/m3. High efficiency pumps with stainless shell and ...

    By Electrical & Pump Services Ltd (EPS) based in Mallow, IRELAND. from Submersible Pumps Product line

  • Industrial Duty Submersible and End-Suction Centrifugal Pumps

    Cat Pumps offers a line of centrifugal pumps that complements our piston and plunger pump product line. These pumps offer solutions to high-flow, low-pressure pumping needs. The pump housings are made of bulge formed 304 stainless steel that is stronger, lighter, more durable and more cost-effective than conventional cast iron pumps. There are ...

    By Cat Pumps based in Minneapolis, MINNESOTA (USA). from Industrial Duty Submersible and End-Suction Centrifugal Pumps Product line

  • Mettifogo - Model MX 4 - 4` Submersible Pumps

    Submersible motors filled with food grade dielectric fluid. Motor housing, shaft and lower bracket manufactured from stainless steel. Brass upper bracket; amply sized equalization diaphragm.

    By Mettifogo SpA based in San Vito al Tagliamento (PN), ITALY. from 4` Submersible Pumps Product line

  • Orlando - Submersible Pump

    Motor-Pump; Brushless motor with a neodymium-iron-boron rotor with over 95% efficiency. Protection Class IP68. Insulation Class F. 4' oil filled constriction. Multi-stage centrifugal submersible pump for clean water in 4' wells. Floating impeller design ensures an extremely wear.resistant configuration. High corrosion resistance. Non-return valve ...

    By Orlando srl based in Chiavari (GE), ITALY.

  • Submersible High Pressure Motorpump

    Stallkamp submersible motor high-pressure pumps are the result of experience and consistent development. They run reliably and safely, and are powerful, effective and eco-friendly at the same time.

    By Erich Stallkamp ESTA GmbH based in Dinklage, GERMANY. from Submersible High Pressure Motorpump Product line

  • Cri-Man - Model PTS 100-150 Series - Submersible Chopper Pump

    Multi-channel impeller and double chopping system: Double chopping system; Max capacity: 340 m³/h (1497 US gpm); Head: 21 m (69 ft); Motor power: 4 - 18,5 kW (5,4 - 26 HP); Suction: 150 - 200 mm (6 - 8 inches); Discharge: 100 - 150 mm (4 - 6 inches).

    By CRI-MAN S.p.A. based in CORREGGIO (RE), ITALY. from Submersible Chopper Pump Product line

  • Veeder-Root - Model AG - Red Jacket Submersible Turbine Pump

    All the advantages of the Red Jacket Submersible Turbine Pump, designed for alternative fuels – such as alcohol and ethanol. Red Jacket Submersible Turbine Pump AG is a fixed-speed alcohol gas fuel pump with a motor that delivers a higher flow rate than any other submersible pump, to optimize flow to your dispensers. The built-in contractor ...

    By The Veeder-Root Company based in Simsbury, CONNECTICUT (USA). from Red Jacket Submersible Turbine Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you