We couldn't find any submersible motor equipment suppliers or service providers located in Maldives

Here is a list of equipment results with suppliers serving Maldives

submersible motor equipment available in Maldives

  • Premium

    Mellegard & Naij - Model RK - Grinder for Solids in Water, Sludge & Waste

    Robust stainless steel construction. Can be used for both wet and dry applications. Can be flange pipe mounted as well as open in channels or chutes. Can be combined with compactors and screens to increase each machines efficiency. High material capacity. Easy changeable drive unit, shaft extension, submersible motor, hydraulic motor. Grinder RK ...

    By Hydria Water AB based in Borås, SWEDEN. from Grinder for Solids in Water, Sludge & Waste Product line

  • Maxisu - Model XSM - 4 - 4 (inc) Submersible Motor

    Outside Diameter: 94 mm. Engine Power Range: Single Phase: 0.5-4HP / Three Phase: 0.5-7.5HP. Compatible with 4 'NEMA standards . Routing: Direct. Supply voltage: ~ 3, 380/415 V (- 6% + 10%), 50 Hz. Supply voltage: ~ 1, 220/240 V (- 6% + 10%), 50 Hz. NSK Bed. Immersion Depth: Standard Upper Limit. Working environment temperature: Max. 35º C. ...

    By Maxisu Submersible Pump & Motor based in Sanliurfa, TURKEY. from 4 (inc) Submersible Motor Product line

  • Submersible Motor Compressors

    Low-noise operation. Low investment costs. Very low operation costs. Delivery of oil-free air. Low-maintenance. Suitable for continuous and intermittent operation as well. Maximum best motor operation due to better cooling behaviour during submersible installation

    By ORPU Pumpenfabrik GmbH based in Oranienburg, GERMANY. from Submersible Motor Compressors Product line

  • Windig Wire

    Submersible motors are used as motors immersed in liquids. For this reason, the wires used for coils in the submersible motor need high-grade installation impermeable to liquids. The winding wires from NSW were developed especially to meet the requirements of this application. They have proven their durability and reliability over many decades, ...

    By Norddeutsche Seekabelwerke GmbH (NSW) based in Nordenham, GERMANY. from Windig Wire Product line

  • Maxisu - Model XSM - 8 - 8 (Inch) Submersible Motors

    Class: F. Frequency: 50 Hz. Outer Diameter: 191 mm. Motor Power Range: 40 HP - 150 HP. Axial load carrying capacity: 40HP-90HP motors and 45 kN 100HP-150HP motors 55 kN. Basierend auf 8 'NEMA Standards. Starting: Direct and Star-Delta. Supply Voltage: ~3, 380/415 V (-%6+%10), Motor protection: IP 68 Mechanical Seal. Submersion depth: Standard ...

    By Maxisu Submersible Pump & Motor based in Sanliurfa, TURKEY. from 8 (Inch) Submersible Motors Product line

  • Model 4 FMW4 Series - Submersible Motors

    The FMW4 series submersible is a water cooled motor, resinate. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The power cable is equipped with a watertight plug, very useful in ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Model 4 FMW4 SS Series - Submersible Motors

    The FMW4 series submersible is a water cooled motor, resinate. All parts in contact with water are in AISI 304 stainless steel. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Vansan - Model 6 Inch - Submersible Motor

    Motor Power Range: 5,5 HP - 50 HP. Axial load carrying capacity::. 5,5HP-30 HP motors 20 kN. 35HP-50HP motors 26,6 kN. 6' NEMA standard top flange. 142 mm ø.

    By Vansan Makina San ve Tic A.S based in Çiğli - İZMİR, TURKEY. from Submersible Motor Product line

  • Veeder-Root - Red Jacket Submersible Turbine Pump

    Red Jacket delivers faster, more reliable fuel flow for the lowest cost of ownership. The Red Jacket is a fixed speed submersible turbine pump that optimizes fuel flow to your dispensers. Its motor performance delivers higher flow rates than any other motor in the industry. It features Red Jacket’s advanced packer manifold design, making it ...

    By The Veeder-Root Company based in Simsbury, CONNECTICUT (USA). from Red Jacket Submersible Turbine Pump Product line

  • Dry Motor Submersible Pump

    Dry motor submersible pump upto 600 mm DN as per KISHOR mounting standard with mechanical seal and solid passage capacity of upto 100 mm and motor capacity upto 500 HP.

    By Kishor Pumps based in Pune, INDIA.

  • Tongda - Model ZJL - Vertical Slurry Pump

    Tongda pump company is one of the most professional pump manufacturer with more than 20 years experience.Vertical slurry pumps is taken to pump the slurry from the tank. The pump head is placed below the liquid level, but not the whole pump into the water.If the pump motor and other parts also are put into the slurry, then the pump is called ...

    By Hebei Tongda Pump&Valve Group Co.,Ltd. based in Baoding, CHINA.

  • Model 260 - 1/6 hp Submersible Utility Pump

    Lightweight, portable and weighing only 7.5 lbs., the model 260 is perfect for miscellaneous water removal from pool covers, flooded areas or other clear water transfer applications such as fountains, etc.  Completely submersible and powered by a 1/6 hp motor, the 260 pumps down to as low as 1/8'.  Garden hose connection.  ...

    By Liberty Pumps based in Bergen, NEW YORK (USA). from 1/6 hp Submersible Utility Pump Product line

  • Model CSS Series - Horizontal Openwell Submersible Pumps

    These centrifugal pumpsets are ideally suitable for openwells or tanks where there is a wide fluctuation in water level occur. This works under water and it rests at bottom of the well. Hence suction and priming problem do not arise. Pump’s volute chamber is designed to give the best possible hydraulic efficiency. Dynamically balanced ...

    By C.R.I. PUMPS (PVT) LIMITED based in Saravanampatty, INDIA.

  • Model 50Hz - Motor

    H3 Motors are suitable for 3” borewell, and operate with permanent split capacitor. H3 Motors are the choice for dependable, maintenance-free operation, and provides a long life for your submersible pump operation.

    By Sharp Sales & Service based in CHENNAI, INDIA.

  • Salvador - Submersible Sludge Pumps

    With the market launch of the new submersible sludge pump range in April 2008 GRINDEX was the trend-setter for the application of modern sludge pumps. The GRINDEX-engineers have chosen a very high aim in the developing of the new range of sludge pumps. Beside the usual configuration of GRINDEX – pumps (air-valve, ...

    By HÜDIG GmbH & Co KG based in Celle, GERMANY. from Submersible Sludge Pumps Product line

  • Model UGM-Series - Submersible Motors

    The UGM 4' submersible motors of Swiss Pump are fully stainless steel, rewind able and water-cooled. UGM 6“, 8“, 10“ are made of cast-iron top and bottom with epoxy-coated paint. The other parts are of stainless steel SS304. Motors for high water temperature up to 90°C and motors made of only stainless steel SS316 are ...

    By Swiss Pump Company AG based in Thun - Gwatt, SWITZERLAND.

  • Model Air-Get - Submersible Aerators

    The Air-Get system is based on the principle of coupling a submersible pump with one or more ejectors. Motor pumps with different power ratings and hydraulic properties may be coupled with ejectors with different flow rates so as to meet the demands of a wide range of applications.The liquid sucked by the pump is conveyed through one or more ...

    By SCM Tecnologie based in San Giorgio (MN), ITALY. from Submersible Aerators Product line

  • Axial-Flow Submersible Motor Pump

    Capacities up to 50000 cu.mtr./hr. Heads up to 20 mtrs. Motors upto 1500 kw and more. Compact unit in mono-block design. Wide range of duties. With wet and dry motor options..

    By Gruppo Aturia SpA based in Gessate (Milano), ITALY. from Axial-Flow Submersible Motor Pump Product line

  • ARVEN - Model OP – B - Submersible Motor

    OP – B: Pressed Brass coupling flange 4' according NEMA rules.OP – C: Cast Iron with anti-corrosive treatment coupling flange 4” according NEMA rules.OP – S: Coupling flange 4' according NEMA rules of SS AISI316.Outer shell of SS AISI 304 - AISI 316.Stud-bolt, washers and nuts for pump coupling of SS AISI 304 - AISI ...

    By ARVEN SRL based in Maclodio, ITALY. from Submersible Motor Product line

  • ChampionPump - Model CPS3 - Submersible Sump/Effluent Pump

    The CPS3 Utilizes a High Efficient 4 FLA, Oil filled PSC Motor with upper and lower ball bearings. The pump can run continuous when submerged. Great for Basements, Dewatering, & Septic applications. SSPMA Certified.

    By Champion Pump Co‎ based in Ashland, OHIO (USA). from Submersible Sump/Effluent Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you