We couldn't find any submersible motor equipment suppliers or service providers located in Vatican City

Here is a list of equipment results with suppliers serving Vatican City

submersible motor equipment available in Vatican City

  • Model 6 50Hz - Submersible Motors

    Three phase 380 V 50 Hz. Voltage Tolerance +- %5. Mill tip and motor connection flange in NEMA standards. Stainless steel rotor shaft and body. GG22 Cast Iron cap. SİC Mechanic Seal. Water Cooled. Able to work vertically or horizontally. Able to turn both two rotations (CW / CCW). Maximum water temperature 35 C. Rewindable windings. Isolation ...

    By Fırat Submersible Pump based in ŞANLIURFA, TURKEY. from Submersible Motors Product line

  • Vansan - Model 6 Inch - Submersible Motor

    Motor Power Range: 5,5 HP - 50 HP. Axial load carrying capacity::. 5,5HP-30 HP motors 20 kN. 35HP-50HP motors 26,6 kN. 6' NEMA standard top flange. 142 mm ø.

    By Vansan Makina San ve Tic A.S based in Çiğli - İZMİR, TURKEY. from Submersible Motor Product line

  • ARVEN - Model OP – B - Submersible Motor

    OP – B: Pressed Brass coupling flange 4' according NEMA rules.OP – C: Cast Iron with anti-corrosive treatment coupling flange 4” according NEMA rules.OP – S: Coupling flange 4' according NEMA rules of SS AISI316.Outer shell of SS AISI 304 - AISI 316.Stud-bolt, washers and nuts for pump coupling of SS AISI 304 - AISI ...

    By ARVEN SRL based in Maclodio, ITALY. from Submersible Motor Product line

  • oddesse - Model po-mo/po-moh - Submersible Motors

    Drive motors connected to deep well pumps for water delivery. Pump drive for applications with special requirements, such as in mining, utilisation of geothermal energy as well as in offshore and marine technology. Drive motors for all submersible motor pumps with connection dimensions according to NEMA standards or international standards, ...

    By oddesse Pumpen- und Motorenfabrik GmbH based in Oschersleben, GERMANY.

  • Model UGM-Series - Submersible Motors

    The UGM 4' submersible motors of Swiss Pump are fully stainless steel, rewind able and water-cooled. UGM 6“, 8“, 10“ are made of cast-iron top and bottom with epoxy-coated paint. The other parts are of stainless steel SS304. Motors for high water temperature up to 90°C and motors made of only stainless steel SS316 are ...

    By Swiss Pump Company AG based in Thun - Gwatt, SWITZERLAND.

  • Submersible Motor

    3'' types: asynchronous, bipolar; s.steel, external jacket; F class insulation; IP58 protection. Threephase or singlephase with capacitor start; voltage, current, frequency, power and torque data according to international rules. Coupling to body pumps according to NEMA STANDARDS; axial load to be coupled in compliance with hydraulic performances. ...

    By PRIMA POMPE - by FINVALORI based in Casarsa (PN), ITALY.

  • Model 4 FMW4 SS Series - Submersible Motors

    The FMW4 series submersible is a water cooled motor, resinate. All parts in contact with water are in AISI 304 stainless steel. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Model MSM 6 Inch - Submersible Motors

    Eksenel Yuk Tasima Kapasitesi: 5,5 HP -30 HP = 20,0 kN. Axial Thrust Load Capacity: 35 HP-50 HP = 26,5 kN. Outside Diameter: Ø142mm. Flange Standart: 6' NEMA Slandart.

    By Mutlu Su Pompalari (MSP) based in Nevsehir, TURKEY. from Submersible Motors Product line

  • Model 6 FMO6 Series - Submersible Motors

    Submersible motors of series FMO6 are asynchronous type, 2-pole with squirrel cage rotor, in oil bath, rewindable. They are very sturdy and oversized, to withstand heavy loads and last a long time even at great depths of immersion. The power cables are equipped with connection plug to be sure that the internal cooling liquid, even if alimentary ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY.

  • Vansan - Model 7 Inch - Submersible Motor

    Motor Power Range: 30 HP - 75 HP. Axial load carrying capacity:: 45 kN. 6' NEMA standard top flange. 172 mm ø.

    By Vansan Makina San ve Tic A.S based in Çiğli - İZMİR, TURKEY. from Submersible Motor Product line

  • Submersible Motors

    Hayward Tyler are the inventors of the submersible motor, providing mission and safety critical systems to a variety of worldwide assets. Seawater lift motors and process pumps are designed to operate continuously providing the cooling water required at a variety of topside applications. Firewater lift pumps are equally designed but for an instant ...

    By Hayward Tyler Ltd based in Glasgow, UNITED KINGDOM.

  • Model P4 - Submersible Motors

    Submersible motors filled with non-toxic dielectric coolant liquid. A new concept in construction, the fruit of several decades of experience in this trade field, combined with a most discriminating selection of the component materials, will ensure optimum performance, top quality, maximum reliability and ease of installation. The special ...

    By Umbra Pompe Srl. based in Loc. Soccorso Magione (PG), ITALY.

  • Model 4 FMW4 Series - Submersible Motors

    The FMW4 series submersible is a water cooled motor, resinate. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The power cable is equipped with a watertight plug, very useful in ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Model MSM 7 Inch - Submersible Motors

    Eksenel Ylik Tafima Kapasitesi: 30 HP - 75 HP=45 kN. Axial Thrust Load Capacity. Outside Diameter: Ø172mm. Flange Standart: 6' NEMA Standart.

    By Mutlu Su Pompalari (MSP) based in Nevsehir, TURKEY. from Submersible Motors Product line

  • Model 4 GG series - Submersible Motor

    4” series high performance water filled submersible motors made of AISI 304 stainless steel (parts in contact with water). Encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Lubrication of the motor and thrust ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Motor Product line

  • Model 4 FMO4 Series - Submersible Motors

    Submersible motors of series FMO4 are asynchronous type, 2-pole with squirrel cage rotor, in oil bath, rewindable. They are very sturdy and oversized, to withstand heavy loads and last a long time even at great depths of immersion. The power cables are equipped with connection plug to be sure that the internal cooling liquid, even if alimentary ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Model MSM 8 Inch - Submersible Motors

    Eksenel Yuk Tasima Kapasitesi: 40 HP -100 HP = 45 kN. Axial Thrust Load Capacity: 110 HP 125 HP = 60 kN. Outside Diameter: Ø192mm. Flange Standart: 8' NEMA Slandart.

    By Mutlu Su Pompalari (MSP) based in Nevsehir, TURKEY. from Submersible Motors Product line

  • Model MSM 10 Inch - Submersible Motors

    Eksenel Yuk Tasima Kapasitesi: 125HP-250HP = 75kN. Axial Thrust Load Capacity. Outside Diameter: Ø231mm. Flange Standart: 8' NEMA Slandart.

    By Mutlu Su Pompalari (MSP) based in Nevsehir, TURKEY. from Submersible Motors Product line

  • SUMA - Model Optimix adjustable - submersible motor

    For liquid manure tanks and slalom systems up to 4 m depth. Attachment directly on the concrete funnel. The funnel channel has a optimum width of 700 mm. The guiding rails and crossmember are in ss304. The Optimix adjustabel comes with a microbe resistant and fabric-reinforced foil. The PVC-Plate is 30 mm thick. Hoisting device for agitators via ...

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY. from submersible motor Product line

  • Model 3 GF series - Submersible Motor

    3” PSC series high performance water filled submersible motors made of AISI 304 stainless steel (parts in contact with water). Encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Lubrication of the motor and thrust ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Motor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you