We couldn't find any submersible motor equipment suppliers or service providers located in Zaire

Here is a list of equipment results with suppliers serving Zaire

submersible motor equipment available in Zaire

  • Vansan - Model 6 Inch - Submersible Motor

    Motor Power Range: 5,5 HP - 50 HP. Axial load carrying capacity::. 5,5HP-30 HP motors 20 kN. 35HP-50HP motors 26,6 kN. 6' NEMA standard top flange. 142 mm ø.

    By Vansan Makina San ve Tic A.S based in Çiğli - İZMİR, TURKEY. from Submersible Motor Product line

  • ARVEN - Model OP – B - Submersible Motor

    OP – B: Pressed Brass coupling flange 4' according NEMA rules.OP – C: Cast Iron with anti-corrosive treatment coupling flange 4” according NEMA rules.OP – S: Coupling flange 4' according NEMA rules of SS AISI316.Outer shell of SS AISI 304 - AISI 316.Stud-bolt, washers and nuts for pump coupling of SS AISI 304 - AISI ...

    By ARVEN SRL based in Maclodio, ITALY. from Submersible Motor Product line

  • Model UGM-Series - Submersible Motors

    The UGM 4' submersible motors of Swiss Pump are fully stainless steel, rewind able and water-cooled. UGM 6“, 8“, 10“ are made of cast-iron top and bottom with epoxy-coated paint. The other parts are of stainless steel SS304. Motors for high water temperature up to 90°C and motors made of only stainless steel SS316 are ...

    By Swiss Pump Company AG based in Thun - Gwatt, SWITZERLAND.

  • Model 4 FMW4 SS Series - Submersible Motors

    The FMW4 series submersible is a water cooled motor, resinate. All parts in contact with water are in AISI 304 stainless steel. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Model 4 GG series - Submersible Motor

    4” series high performance water filled submersible motors made of AISI 304 stainless steel (parts in contact with water). Encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Lubrication of the motor and thrust ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Motor Product line

  • Model 6 FMO6 Series - Submersible Motors

    Submersible motors of series FMO6 are asynchronous type, 2-pole with squirrel cage rotor, in oil bath, rewindable. They are very sturdy and oversized, to withstand heavy loads and last a long time even at great depths of immersion. The power cables are equipped with connection plug to be sure that the internal cooling liquid, even if alimentary ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY.

  • Vansan - Model 7 Inch - Submersible Motor

    Motor Power Range: 30 HP - 75 HP. Axial load carrying capacity:: 45 kN. 6' NEMA standard top flange. 172 mm ø.

    By Vansan Makina San ve Tic A.S based in Çiğli - İZMİR, TURKEY. from Submersible Motor Product line

  • Model 4 FMW4 Series - Submersible Motors

    The FMW4 series submersible is a water cooled motor, resinate. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The power cable is equipped with a watertight plug, very useful in ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • Submersible Motors

    Hayward Tyler are the inventors of the submersible motor, providing mission and safety critical systems to a variety of worldwide assets. Seawater lift motors and process pumps are designed to operate continuously providing the cooling water required at a variety of topside applications. Firewater lift pumps are equally designed but for an instant ...

    By Hayward Tyler Ltd based in Glasgow, UNITED KINGDOM.

  • Model 4 FMO4 Series - Submersible Motors

    Submersible motors of series FMO4 are asynchronous type, 2-pole with squirrel cage rotor, in oil bath, rewindable. They are very sturdy and oversized, to withstand heavy loads and last a long time even at great depths of immersion. The power cables are equipped with connection plug to be sure that the internal cooling liquid, even if alimentary ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Motors Product line

  • SUMA - Model Optimix adjustable - submersible motor

    For liquid manure tanks and slalom systems up to 4 m depth. Attachment directly on the concrete funnel. The funnel channel has a optimum width of 700 mm. The guiding rails and crossmember are in ss304. The Optimix adjustabel comes with a microbe resistant and fabric-reinforced foil. The PVC-Plate is 30 mm thick. Hoisting device for agitators via ...

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY. from submersible motor Product line

  • Model 3 GF series - Submersible Motor

    3” PSC series high performance water filled submersible motors made of AISI 304 stainless steel (parts in contact with water). Encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Lubrication of the motor and thrust ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Motor Product line

  • Orlando - Model 3 - Submersible Motors

    A new serie of 3” submersible motors, rewindable and oil cooled, is the consistent evolution of the previous experiences with 4” and 6” submersible range. Production and quality standards, peculiarity of the “ Made in Italy”, guarantee the reliability and the efficiency of all manufactured submersible motors. The use ...

    By Orlando srl based in Chiavari (GE), ITALY.

  • Model 6 GF series - Submersible Motor

    Submersible motor 6” GF series Series of water filled submersible motors with encapsulated (canned) stator and rotor for installation in 6” (150 mm or more) diameter wells. The motor is supplied pre-filled with a coolant (entirely non-toxic) consisting of a water + propylene glycol mixture with anti-oxidant, lubricating and anti-freeze ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Motor Product line

  • Model 6 GX series - Submersible Motor

    Submersible motor 6” GX seriesof water filled submersible motors with encapsulated (canned) stator completely built in AISI 316 for aggressive/salty water. The motor is supplied pre-filled with a coolant (entirely non-toxic) consisting of a water + propylene glycol mixture with anti-oxidant, lubricating and anti-freeze functions (up to -15 ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Motor Product line

  • 8` Submersible Motor

    Poldap submersible motors are rewindable type, with wet stator, with water coolant system, can be lubricated, are designed to use for clear water pumps at depth well with three phase and are electrical motors with squireel cage.

    By Polmot Motor Mak.San. ve Tic. A.S. based in Selcuklu /Konya, TURKEY. from 8` Submersible Motor Product line

  • 7` Submersible Motor

    Poldap submersible motors are rewindable type, with wet stator, with water coolant system, can be lubricated, are designed to use for clear water pumps at depth well with three phase and are electrical motors with squireel cage.

    By Polmot Motor Mak.San. ve Tic. A.S. based in Selcuklu /Konya, TURKEY. from 7` Submersible Motor Product line

  • 5` Submersible Motor

    Poldap submersible motors are rewindable type, with wet stator, with water coolant system, can be lubricated, are designed to use for clear water pumps at depth well with three phase and are electrical motors with squireel cage.

    By Polmot Motor Mak.San. ve Tic. A.S. based in Selcuklu /Konya, TURKEY. from 5` Submersible Motor Product line

  • 6` Submersible Motor

    Poldap submersible motors are rewindable type, with wet stator, with water coolant system, can be lubricated, are designed to use for clear water pumps at depth well with three phase and are electrical motors with squireel cage.

    By Polmot Motor Mak.San. ve Tic. A.S. based in Selcuklu /Konya, TURKEY. from 6` Submersible Motor Product line

  • Model SM Series - ANDRITZ Submersible Motors

    ANDRITZ rewindable submersible motors are used in the water supply, mining, and offshore sectors. They are the ideal drives for submersible deep well pumps, bottom intake pumps, sea water lift pumps, and for subsea machinery.

    By ANDRITZ Atro GmbH based in Nuernberg, GERMANY. from ANDRITZ Submersible Motors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you