submersible motor equipment in South Africa

  • Model 4 GG series - Submersible Motor

    4” series high performance water filled submersible motors made of AISI 304 stainless steel (parts in contact with water). Encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Lubrication of the motor and thrust ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Motor Product line

  • Model 3 GF series - Submersible Motor

    3” PSC series high performance water filled submersible motors made of AISI 304 stainless steel (parts in contact with water). Encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Lubrication of the motor and thrust ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Motor Product line

  • Model 6 GF series - Submersible Motor

    Submersible motor 6” GF series Series of water filled submersible motors with encapsulated (canned) stator and rotor for installation in 6” (150 mm or more) diameter wells. The motor is supplied pre-filled with a coolant (entirely non-toxic) consisting of a water + propylene glycol mixture with anti-oxidant, lubricating and anti-freeze ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Motor Product line

  • Model 6 GX series - Submersible Motor

    Submersible motor 6” GX seriesof water filled submersible motors with encapsulated (canned) stator completely built in AISI 316 for aggressive/salty water. The motor is supplied pre-filled with a coolant (entirely non-toxic) consisting of a water + propylene glycol mixture with anti-oxidant, lubricating and anti-freeze functions (up to -15 ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Motor Product line

  • NOVA - Submersible Pump

    Pump body, impeller, cap and suction grid in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor. Stator fitted in an airtight stainless steel casing. Rotor mounted on overdimensioned, greased-for-life ball bearings. ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Pump Product line

  • Model MICRA series - Submersible Pump

    3” centrifugal submersible pumps for wells consisting of 3GF series canned motors coupled with multistage pumps; discharge and bracket made of brass, outer casing, pump shaft and cable protector made of steel, diffusers and impellers made of technopolymer; the special construction of the canned motor guarantees maximum safety in the most ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Pump Product line

  • Model DIVER series - Submersible Pump

    5” multistage submersible pumps with outer casing in AISI 304 stainless steel; encapsulated stator filled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Cooling of the pump is ensured by the pumped liquid. The radial centrifugal ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Pump Product line

  • Model IDEA series - Submersible Pump

    4” submersible pumps with AISI 304 stainless steel casing; the pump is designed for solving locking problems in cast iron pumps. The canned stator ensures maximum reliability of operation and maintenance. In the single-phase version pump provide high starting torque. The connector cable can be easily removed. Cooling of the pump is ensured ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from Submersible Pump Product line

  • IDEA - 4` Peripheral Submersible Pump

    Peripheral borehole pump single impeller (Idea 75 - 100), double impeller (Idea 150) (for 4” wells or larger, capable of providing high heads with limited power. Suitable for water lifting and distribution applications in domestic systems, small agricultural concerns, pressurisation of pressure vessels and DIY uses. Pump body and motor ...

    By Dab Pumps Office in Lynwood Glen, SOUTH AFRICA. from 4` Peripheral Submersible Pump Product line

  • Shakti - Submersible Motors

    Submersible Motors - Stainless Steel construction of motor shell. Suitable for 380V/415V & 50 Hz electric supply. Can also designed for different voltage/frequency combination of electric supply against specific requirements. Available for well size 4', 6' and 8'. Also available in complete stainless steel construction.

    By Shakti Pumps (I) Ltd Distributor in Bellville, SOUTH AFRICA.

  • Ama-Drainer - Model 80 / 100 - Submersible Motor Pump

    Vertical, fully floodable submersible motor pump in close-coupled design, IP 68, single-stage, with or without level control, max. immersion depth 10 m.

    By KSB Group Distributor in Bellville, SOUTH AFRICA. from Submersible Motor Pump Product line

  • Premium

    Eijkelkamp Grundfos - Model MP 1 - Submersible Pump Sets

    The Grundfos MP 1 pump used in the Grundfos MP 1 submersible pump sets is specially designed for purging and sampling monitoring wells with a diameter of at least 50 mm and a depth to 90 meters. The pump motor is controlled by a special adjustable frequency converter. Since the frequency is continuously adjustable, the capacity of the Grundfos MP ...

    By Eijkelkamp Soil & Water Distributor in SOUTH AFRICA. from Submersible Pump Sets Product line

  • Amacan - Model S Series - Wet-Installed Submersible Motor Pump

    Wet-installed submersible motor pump with mixed flow impeller, singlestage, for installation in discharge tubes, explosion protection to ATEX II G2 T3.

    By KSB Group Distributor in Bellville, SOUTH AFRICA. from Wet-Installed Submersible Motor Pump Product line

  • KSB - Model Ama-Drainer 400/500 - Vertical, Fully Floodable Submersible Motor Pump

    Vertical, fully floodable submersible motor pump in close-coupled design, IP 68, single-stage, with or without level control, max. immersion depth 10 m.

    By KSB Group Distributor in Bellville, SOUTH AFRICA.

  • KSB - Model Ama-Drainer 80 / 100 - Vertical, Fully Floodable Submersible Motor Pump

    Vertical, fully floodable submersible motor pump in close-coupled design, IP 68, single-stage, with or without level control, max. immersion depth 10 m.

    By KSB Group Distributor in Bellville, SOUTH AFRICA.

  • Premium

    Eijkelkamp - Model 12.12.SA - Submersible Pump Set (Low Cost)

    This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with battery ...

    By Eijkelkamp Soil & Water Distributor in SOUTH AFRICA. from Submersible Pump Set (Low Cost) Product line

  • Amajet - Portable Unit

    Stationary or portable unit with horizontal or vertical submersible motor propulsive jet pump with non-clogging free-flow impeller. Motor rating 5.5 to 27 kW. Available variants: Amajet, SewerAmajet, SwingAmajet, MultiAmajet.

    By KSB Group Distributor in Bellville, SOUTH AFRICA. from Portable Unit Product line

  • LISST-STX - Submersible Field Instrument

    The LISST-STX is a submersible field instrument developed for in-situ observation of the size-dependent settling velocity distribution of suspended particles. It incorporates a mechanized Settling Column. The LISST-STX is designed to carry out multiple settling experiments while submerged. A motorized mechanism operates the doors that control ...

    By Sequoia Scientific, Inc. Distributor in Johannesburg, SOUTH AFRICA. from Submersible Field Instrument Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you