We couldn't find any submersible pump equipment suppliers or service providers located in North Korea

Here is a list of equipment results with suppliers serving North Korea

submersible pump equipment available in North Korea

  • Premium

    Eijkelkamp Grundfos - Model MP 1 - Submersible Pump Sets

    The Grundfos MP 1 pump used in the Grundfos MP 1 submersible pump sets is specially designed for purging and sampling monitoring wells with a diameter of at least 50 mm and a depth to 90 meters. The pump motor is controlled by a special adjustable frequency converter. Since the frequency is continuously adjustable, the capacity of the Grundfos MP ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Submersible Pump Sets Product line

  • Premium

    ENTA - Submersible Pump

    Submersible pumps have found their uses and applications in places where any fluid needs to be drained or pumped out.

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Submersible Pump Product line

  • Premium

    DeTech - Model MP Series - Submersible Grinder Pump

    ‘MP’ series submersible grinder pump have been designed for economical and reliable pumping of sewage from commercial, industrial or civil sources. It is suitable for clear and waste water, and for medium contains fibrous material. The pump can be installed in automatic type thanks to quick separate pedestal or portable style.

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA. from Submersible Grinder Pump Product line

  • Premium

    DeTech - Model ZQB & HQB Series - Submersible Propeller Pump

    The submersible propeller pumps are mainly used for irrigation and water drainage etc.Three phase, squirrel cage motor.Voltage: 400v or others, 3ph, 50 / 60 Hz.Insulation class F = 155oC,  Protection grade IP68.Max. medium temperature in continous operation: +40oC.

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA. from Submersible Propeller Pump Product line

  • Premium

    Eijkelkamp - Model 12.12.SA - Submersible Pump Set (Low Cost)

    This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with battery ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Submersible Pump Set (Low Cost) Product line

  • Showcase

    ASTIM - Degritors Used After Central Driven Grit Removal Systems

    Degritor is mostly used after central driven grit removal systems. It is consisting of a reciprocating multi-rake mechanism which is working in an inclined narrow channel. Here reciprocating rakes move the grit up the tank incline with a rolling action that releases entrained organics. The organics are kept suspended and returned to grit chamber ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Degritors Used After Central Driven Grit Removal Systems Product line

  • Model FVO 204 - Submersible Pump

    Submersible Pump for Wastewater, Rainwater and Infiltrations. For the lift-pumping of wastewater, rainwater and infiltrations from collective residential, tertiary and commercial buildings.

    By Salmson based in Chatou Cedex, FRANCE. from Submersible Pump Product line

  • FLOWPAP - Submersible Pumps

    FLOWPAP Submersible pumps with Pleuger motors have already been established as the most reliable in the worldwide as well as in the Greek market.Many thousands FLOWPAP - Pleuger submersible units operate for over 40 years all over Greece to cover needs for irrigation, water supply etc. (in public or private cases).FLOWPAP - Pleuger submersible ...

    By Papantonatos S.A. based in Acharnes, GREECE.

  • Model QDX-F Series - Submersible Pumps

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made.Mainly used for well pumping, river pumping, farm irrigation, water supply, drainage in breeding industry.

    By Zhejiang Fengqiu IMP/EXP. Co., Ltd. based in Zhuji, CHINA.

  • Model UG-Series - Submersible Pumps

    The UG submersible pumps of Swiss Pump are made of corrosion- and abrasion-resistant stainless steel in 4', 6', 8' and 10'. The UG series is manufactured to the highest standards of efficiency and performance. The pumps are robust and long-lasting under even demanding conditions.

    By Swiss Pump Company AG based in Thun - Gwatt, SWITZERLAND.

  • Bombas - Submersible Pumps

    The development and the execution of a technical catalogue is something that involves all the departments of the Company. Therefore, Bombas Omega designs, checks and analyses all the parameters included in the catalogue. All the information is checked, amplified and improved. We make all the required tests in order to give to our customers easy, ...

    By Bombas Omega based in Abanto, SPAIN.

  • Model AP6 6 - Submersible Pump

    The AP6 pump has been designed for matching market requirements and easy maintenance.

    By f.el.som. Middle East based in Sharjah, UNITED ARAB EMIRATES.

  • Submersible Pump

    A submersible pump is a turbine pump close-coupled to a submersible electric motor. Both pump and motor are suspended in the water, thereby eliminating the long drive shafts and bearing retainers required for a deep well turbine pump. Because the pump is located above the motor, water enters the pump through a screen located between the pump and ...

    By Layne Bowler Pump Company Inc. based in Yenimahalle, TURKEY.

  • T-T Pumps - Model T-T305 / T-T505 / T-T510 - Submersible Pump

    The T-T305, T-T505 and T-T510 submersible pumps are designed for transferring sewage and effluent, and for dirty water drainage. This range of pumps has a shredding action, produced by the impeller rotating against a special serrated suction cover, and reduces any destructible matter to a manageable size for pumping, minimising the risk of ...

    By T-T Pumps Ltd. based in Woore, UNITED KINGDOM. from Submersible Pump Product line

  • Model 5 - Submersible Pump

    Requires 6' (15 cm) minimum well size. Capacities to 350 GPM (1,325 LPM).

    By Wolf Pumps - Zoeller Company based in Abernathy, TEXAS (USA). from Submersible Pump Product line

  • Model 6 - Submersible Pump

    Requires 7' (17.8 cm) minimum well size. Capacities to 450 GPM (1,703 LPM).

    By Wolf Pumps - Zoeller Company based in Abernathy, TEXAS (USA). from Submersible Pump Product line

  • Model MICRA series - Submersible Pump

    3” centrifugal submersible pumps for wells consisting of 3GF series canned motors coupled with multistage pumps; discharge and bracket made of brass, outer casing, pump shaft and cable protector made of steel, diffusers and impellers made of technopolymer; the special construction of the canned motor guarantees maximum safety in the most ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Pump Product line

  • Pompe Rotomec - Model CF – CV - Submersible Pump

    Submersible pumps in stainless steel and vertical delivery port, open impeller (CF) or Vortex impeller (CV) and port of discharge vertical. Motor cooled by the pumped water passing between the motor jacket and the external jacket Max liquid temperature 50°C.

    By Pompe Rotomec Srl based in Cernusco S/N, ITALY. from Submersible Pump Product line

  • Model 4 - Submersible Pumps

    Submersible pumps of FP4 series are of new design, very solid and compact, easy to maintain. The supports, stainless steel AISI 304, obtained with wax casting process, ensure great robustness and reliability of the product. The new design of independent floating impeller, patented, guarantees a low axial load on the motor. The new materials used ...

    By Exa Pumps srl based in Gera Lario (Co), ITALY. from Submersible Pumps Product line

  • Model PS14 - Submersible Pump

    Body and turbine : cast iron. Motor housing: stainless steel. Maximum water temperature : 40°C. Maximum admissible particle diameter : 45 mm.Maximum immersion depth : 5 m. Flow rate 2 to 16 m3/h

    By Pompes Japy based in FESCHES-LE-CHATEL, FRANCE. from Submersible Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you