submersible pump equipment in Quebec

  • Model US602 - Submersible Pump

    A powerful submersible, ½ HP, multistage, semi-automatic pump. Ideal for rain water recovery systems, irrigation systems, pumping water into tanks and any other rain water use needing high pressure. This pump is suitable only for pumping clear water only.

    By Éconeau Inc based in Dollard-des-Ormeaux, QUEBEC (CANADA). from Submersible Pump Product line

  • Model US645 - Submersible Pump

    A powerful automatic multistage submersible pump, designed for rain water recovery systems. Indispensable for supplying rain water to small buildings, irrigation systems and all other applications or network requiring high pressure. This pump is suitable only for pumping clear water only. This submersible 1 HP, with an integrated electronic ...

    By Éconeau Inc based in Dollard-des-Ormeaux, QUEBEC (CANADA). from Submersible Pump Product line

  • Plad - Model SBM Type - Submersible Pump

    Plad Submersible Pump.Industrial type submersible pump featuring a cast iron volute and a stainless steel fabricated impeller.Available from 4 In. (150mm) to 10 In. (250mm) Nominal speed from 900 to 3600 Rpm.A heavy duty submersible pump featuring a centralized discharge flange and a stainless steel to corrosive resistant impeller.Stainless steel ...

    By Plad Equipment Ltd. based in Bois des fillions, QUEBEC (CANADA). from Submersible Pump Product line

  • Tsurumi - Model LB480 - Submersible Pump

    The LB series of submersible pumps are extremely robust, compact contractor pumps, that have a 50mm outlet and a tough pressed steel strainer base and body. They offer excellent durability during periods of continuous use and/or operator abuse. A combination of a rubber pump chamber and a urethane vortex impeller provides excellent wear resistance ...

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Submersible Pump Product line

  • Model SS233 - Submersible Pumps

    This lightweight, compact submersible pump is the first choice for household moving water applications such as: flooded rooms, flat roofs, fill tanks, basins, fountains and waterfalls. Hardy thermoplastic pump casing body resists corrosion and heat. Further, the SS233 incorporates internal thermal overload protection, dual shaft seals, and ...

    By Multiquip Inc. Office in Laval, QUEBEC (CANADA). from Submersible Pumps Product line

  • Model DPJ - Wellhead for Submersible Pumping Units

    Installation performed with 4''discharge columns or less and an underground discharge to prevent freezing. Provides better sealing. Featuring 2 stainless steel boxes adapted to the head - equipped with a lid that can be bolted and padlocked. Guaranteed durability: Factory tested pit-less adaptator - two coats of epoxy paint applied to sandblast ...

    By Danovar Inc. based in St-Rosaire, QUEBEC (CANADA). from Wellhead for Submersible Pumping Units Product line

  • Tsurumi - Model HS - 1-phase / 50Hz - Submersible Contractor Pump

    The TSURUMI HS-pump is a small and robust submersible contractor's pump with a wide range of applications whereever water has to be moved.

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Submersible Contractor Pump Product line

  • Model BER - 3-phase / 50Hz - Sewage Pump

    This submersible ejector is composed of a B type pump and a venturi with diffusor trumpet.

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Sewage Pump Product line

  • Model LB - 1-phase / 50Hz - Contractors Pumps

    The TSURUMI LB-pumps are small and robust submersible contractor's pumps with a wide range of applications whereever water has to be moved.

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Contractors Pumps Product line

  • Burke - Model 300402 - Submersible Sump Emergency Back-up Pump

    Back-up and emergency sump pump operates from municipal Water pressure. No need of electrical Supply. The municipal water passes into the jet of The pump and create a suction which evacuates The water of the sump. Reliable and safe, this pump Does not have any moving part and is built with non corrosive Material. Ideal to be connected with any ...

    By Burke Water Systems Manufacturing Inc. based in Laval, QUEBEC (CANADA). from Submersible Sump Emergency Back-up Pump Product line

  • Burke - Model 300400 - Submersible Sump Emergency Back-up Pump

    Emergency back-up sump pump operated by the pressure of your municipal water supply. No electricity required. The water under pressure will flow trough the pump jet which creates a vaccuum and cause the water in the sump to be drawn out into the discharge line in case of power failure or primary pump failure. Made from brass for longevity, this ...

    By Burke Water Systems Manufacturing Inc. based in Laval, QUEBEC (CANADA). from Submersible Sump Emergency Back-up Pump Product line

  • Versablue - Model 500 - Low Density Polyethylene Pipe

    VERSABLUE 500 and VERSAPIPE STANDARD BLUE pipe designed for working pressures of 100psi, 160psi and 200psi. Made with low-density polyethylene, the ultra-flexible VERSABLUE™ applies to submersible pumps for water well designs.

    By Versaprofiles based in Saint-Lazare de Bellechasse, QUEBEC (CANADA). from Low Density Polyethylene Pipe Product line

  • Wastewater Pumps / Water Pumps

    Claro provides a selection of high quality pumps including: Chopper pumps. Recirculation pumps. Aerator pumps. Grit/slurry pumps. Self-priming grit slurry pumps. Vertical wet pit pumps. Dry pit solids handling pumps. Submersible solids handling pumps. Sludge pumps. Vortex pumps. Ni hard vortex pumps. Severe duty cup type recessed impeller pumps. ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Wastewater Pumps / Water Pumps Product line

  • Orca - Insubmersible Pumping System

    This is our “insubmersible” pumping system that is reliable, easy to transport and install and made to measure for your solids-laden water dewatering needs. A modular, portable system, the Orca SK™ offers low-cost maintenance compared with conventional submersible systems.

    By Pompaction inc. based in Pointe-Claire, QUEBEC (CANADA). from Insubmersible Pumping System Product line

  • Simflo - Model Hilo Series - Submersible Pumps

    Simflo’s hilo series submersible pumps are some of the best on the market today. Their excellent engineering and robust construction, along with a wide range of operating capacities, ensures that there is a hilo series pump that will meet your demands and will offer you dependable, worry-free service.

    By Simflo Pumps Inc Distributor in St-Rosaire, QUEBEC (CANADA).

  • Simflo - Submersible Pumps

    Simflo's discharge elbows are fabricated steel and are provided with a class 150 ANSI raised face flanges of the same diameter as the column pipe. The discharge elbow has an integral steel base drilled for flange mounting and lifting lugs of sufficient strength to lift the entire head, column pipe and pump/motor assembly safely for installation ...

    By Simflo Pumps Inc Distributor in St-Rosaire, QUEBEC (CANADA).

  • OTS Submersible Pumps

    Off-the-Shelf submersible pumps available through Gorman-Rupp's OTS program can be used for flood waters, sumps and pits where water must be lifted more than 20 feet, or where engines are not suitable. For construction, agricultural, municipal and industrial applications. Please visit our OTS Pumps site for more information and other products ...

    By Gorman-Rupp Co. Distributor in Saint-Laurent, QUEBEC (CANADA). from OTS Submersible Pumps Product line

  • Mini-Typhoon - Model WSP-12V-2M - Plastic Submersible Pump

    12 volt engineered plastic submersible pump.The WSP-12V-2M Mini-Typhoon® pump is capable of pumping up to 40 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

    By Waterra USA Inc. Distributor in QUEBEC (CANADA). from Plastic Submersible Pump Product line

  • Cyclone - Model WSP-12V-1 - Plastic Submersible Pump

    12 volt engineered plastic submersible pump.The WSP-12V-1 Cyclone pump is capable of pumping up to 25 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

    By Waterra USA Inc. Distributor in QUEBEC (CANADA). from Plastic Submersible Pump Product line

  • Model Type ABS XRCP - Submersible Recirculation Pump

    The XRCP is specifically designed for pumping and recirculation of activated sludge in the denitrification/nitrification process of a wastewater treatment plants. This compact and easy-to-handle pump is efficient and reliable.

    By Sulzer Ltd. Distributor in St-Rosaire, QUEBEC (CANADA). from Submersible Recirculation Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you