Submersible Pump Equipment Near Uzbekistan
-
based in PAKISTAN
For locations without power lines, BMM Technologies offer a high quality solar submersible pumps giving a clean and simple alternative to fuel-burning generators. They require no fuel deliveries. A Solar submersible pump extracts most water when the weather is sunny and dry.By using the sun tracking system, we can increase the ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The newly developed series of GTA pumps manufactured in stainless steel have been especially designed for long-term permanent use on vessels. The stainless steel GTA pumps are surface treated with a mix of of highly protective dirt repellent and hydrophobic coatings to further enhance the superior properties of the acid proof stainless ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
Our LANDY submersible DCP pump with open channel impeller is ideally suited for slightly contaminated wastewater. This high efficient pump is featured by a compact design, high pressure and non-clogging performance. ...
-
Manufactured by Muntersbased in USA
Munters Evaporative Precoolers for Chiller/Condenser (EPCC) are typically a recirculation (water) type evaporative cooler with make up water via solenoid and ball float, recirculating submersible pump, manual water bleed off (auto as an option) and a Dump valve. Air passes through wetted CELdek® rigid evaporative media, the ambient ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flange, stainless steel, for connection of suspension cable to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 18 x 13 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 16 x 20 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hose reel cart small, to transport tube, cable and pump. Capacity till 60 m tube. Inclusive holder for submersible pump, 5 leather straps to fix tube on reel and mounting ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump "Gigant", ABS/Inox, Ø 36 mm, maximal capacity 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with strainer, with 5 m pvc coated cable, set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Grundfos MP 1 pump used in the Grundfos MP 1 submersible pump sets is specially designed for purging and sampling monitoring wells with a diameter of at least 50 mm and a depth to 90 meters. The pump motor is controlled by a special adjustable frequency converter. Since the frequency is continuously adjustable, the capacity ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hose reel cart, large, to transport tube, cable and pump. Capacity 60 - 200 m tube. Inclusive holder for submersible pump, 5 leather straps to fix tube on reel and mounting ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump Grundfos MP 1, centrifugal type for purging/sampling monitoring wells, stainless steel 316, pressure head lift maximal 86 m, adjustable capacity till maximal 1.8 m3/h, 220 V 1.1 kW, for connection to frequency converter, pump Ø 45 mm, 287 mm long. With mounted Teflon power cable 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump Grundfos MP 1, centrifugal type for purging/sampling monitoring wells, stainless steel 316, pressure head lift maximal 86 m, adjustable capacity till maximal 1.8 m3/h, 220 V 1.1 kW, for connection to frequency converter, pump Ø 45 mm, 287 mm long. With mounted Teflon power cable 30 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump Grundfos MP 1, centrifugal type for purging/sampling monitoring wells, stainless steel 316, pressure head lift maximal 86m, adjustable capacity till maximal 1.8 m3/h, 220V 1.1 kW, for connection to frequency converter, pump Ø 45 mm, 287 mm long. With mounted Teflon power cable 60 m. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 12 x 16 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 10 x 12 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Cooling jacket, for adaption of submersible pump Grundfos MP 1/Redi-Flo2 to monitoring wells with a diameter larger than 75 ...
-
PremiumManufactured by Weda ABbased in SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then ...
-
PremiumManufactured by Weda ABbased in SWEDEN
In these days the importance of saving water is steadily increasing. Traditional cleaning of all types of reservoirs has required draining with staff inside the reservoirs. This is no longer accepted on many of the world markets due to the safety risks for the staff. Plus the unnecessary waste of water. The alternative with divers is becoming less popular due to higher costs as well as safety ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you