Submersible Sludge Pump Equipment
-
Manufactured by Eekels Pompenbased in NETHERLANDS
The Salvador 3f INOX submersible sludge pump from Grindex is a robust submersible pump for displacing viscous mixtures and sludge. This submersible pump offers a greater capacity than the Salvador 1f, but has a lower lift height than the Salvador 3f. The Salvador ...
-
Manufactured by HÜDIG GmbH & Co KGbased in GERMANY
With the market launch of the new submersible sludge pump range in April 2008 GRINDEX was the trend-setter for the application of modern sludge pumps. The GRINDEX-engineers have chosen a very high aim in the developing of the new range of sludge pumps. Beside the usual ...
-
Distributed by DOOS s.r.o.based in CZECH REPUBLIC
The submersible sludge GFHU pumps are special pumps used especially for pumping of waste water, raw sludge, fecal solids with content of non-abrasive, solid and small particles and fibrous substances such as paper, rag pulp, food residuals or even small portion of sand, ashes, grit and other ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
Hydroman™ TSQ Submersible Sludge Pump is specifically designed for applications where the fluid to be moved has a higher viscosity than water and/or contains solids up to 65mm. Especially effective in returning activated sludge in wastewater treatment works, temporary sewage bypass pumping and emptying polluted ...
-
Manufactured by HÜDIG GmbH & Co KGbased in GERMANY
With the further development of the TOPLINE-range GRINDEX shows again that they are capable to match the pump-design to the needs of the users. The “new small” GRINDEX is called SOLID and is the start of the technical changes in the small sized range. The users are getting together with the SOLID high operational safety ...
-
Distributed by Aquatech Dewatering Companybased in CANADA
The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL30 and GSL35 models are capable of maximum flow rates from 205 to 220 gpm (12.9 to 13.9 l/sec) and discharge heads to 59 feet (18M). Like the dewatering models in the Sub-Prime line, these submersible ...
-
Distributed by Aquatech Dewatering Companybased in CANADA
The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL60 model is capable of maximum flow rates from 240 gpm (15.1 l/sec) and discharge heads to 85 feet (25.9M). The GSL80 model is capable of maximum flow rates from 84 to 490 gpm (5.3 to 30.9 l/sec) and discharge heads to ...
-
Manufactured by Grindex Pumpsbased in SWEDEN
Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying ...
-
Manufactured by Grindex Pumpsbased in SWEDEN
Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying ...
-
Manufactured by Grindex Pumpsbased in SWEDEN
Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying ...
-
Manufactured by Grindex Pumpsbased in SWEDEN
The Solid pump excels in applications where reliability and easy handling are essential. Like its drainage equivalent, Mini, it is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 38 ...
-
Manufactured by Grindex Pumpsbased in SWEDEN
The Solid pump excels in applications where reliability and easy handling are essential. Like its drainage equivalents, Mini, it is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 38 ...
-
Manufactured by Mody Pumps Inc.based in USA
Portable electric submersible sludge pump for corrosive & abrasive ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
The clarifier is a settling basin that allows the sand and silt to be separated from the water, with the sand and silt settling to the bottom. The basin settles out the sand, silt, and mud that gets pumped in from the river and rakes it into a sump that is located under the clarifier. Hydroman® Submersible Sludge Pump with ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
Hydroman™ Electric Submersible Sludge Pump for Pumping Industrial Waste are also known as submersible sludge pumps as they are primarily used to transfer sewage, sludge, waste water and other kinds of dirty fluids with solid particles and liquids with high ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
Hydroman® Submersible Sludge Pumps to Remove Siltation is a better way in water treatment plants, water treatment plants extracting fresh water from a nearby river to clarifier almost always entails pumping in a significant amount of sand and silt, so need to use a submersible sludge ...
-
Manufactured by DAE Pumpsbased in USA
The DAE Pumps Sonora S333 Submersible Sludge Pumps are designed for an extensive range of applications. Their robust design provides the performance, reliability, and ease of use you need. DAE Pumps Sonora S333 pumps are built to move abrasive materials with solids up to 2-inches. With a 3-inch ...
-
Manufactured by DAE Pumpsbased in USA
The DAE Pumps Sonora S540 Submersible Sludge Pumps are designed for an extensive range of applications. Their robust design provides the performance, reliability, and ease of use you need. DAE Pumps Sonora S540 pumps are built to move abrasive materials with solids up to 2-inches. With a 4-inch ...
-
Manufactured by DAE Pumpsbased in USA
The DAE Pumps Sonora S331 Submersible Sludge Pumps are designed for an extensive range of applications. Their robust design provides the performance, reliability, and ease of use you need. DAE Pumps Sonora S331 pumps are built to move abrasive materials with solids up to 2-inches. With a 3-inch ...
-
Manufactured by WEDA Pumpbased in NETHERLANDS
The RL2030 combines the advantages of small pumps (lightweight) and those of bigger pumps (with dual mechanical shaft sleeve), therefore resulting in a compact design, but with the best possible performance and service ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you