Only show results in Texas? Ok

submersible trash pump equipment

  • Premium

    Elgin - Submersible Feed Pump

    With over 25 years of experience in designing and manufacturing reliable solids control equipment for the oil & gas industry, Elgin recognizes the need for reliable and efficient submersible feed pumps.  Elgin’s line of solids-handling pumps have been designed to reliably handle a myriad of solids-laden fluids with minimal ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Pumps Product line

  • Skid-N-Pump - Submersible Trash Pump

    The Skid-n-Pump is designed to efficiently and economically conceal either a submersible trash pump in a primary water source with minimal installation investments.

    By Greenscape Pump Services Inc. (GPSI) based in Carrollton, TEXAS (USA).

  • Kennelly - Model HS2.4S - Submersible Trash Pump

    1/2hp Elect Motor. 50gpm @ 5′ Head. 30gpm @ 25′ Head. 2″ Bore. 10″ Diameter. 13″ Height. 20′ Cable Length. 25LB Operating Weight. Built-in Shaft Mounted Agitator Suspends Solids. Urethane Semi Vortex Impeller for Maximum Durability and Pump Performance. Double Inside Mechanical Seal With SiC Faces Provides ...

    By Kennelly Equipment Company based in Huntington Beach, CALIFORNIA (USA). from Water Pumps Product line

  • Sub-Prime - Model GST05/10 - Electric Submersible Trash Pumps

    The GST Sub-Prime line is a selection of portable, electric submersible pumps designed for trash laden applications. Standard side discharge and semi-vortex cast iron impeller enable these units to handle up to 1' (25mm) diameter solids. And the fully removable volute makes clean-out fast and easy. The GST Sub-Prime line offers flow rates to 75 ...

    By Aquatech Dewatering Company based in Maple, ONTARIO (CANADA). from Electric Submersibles Pumps Product line

  • Float-N-Pump - Submersible Turbine Pump

    The Float-n-Pump is designed to efficiently and economically float either a submersible turbine pump or submersible trash pump in a primary water source.

    By Greenscape Pump Services Inc. (GPSI) based in Carrollton, TEXAS (USA).

  • D & D - Submersible Trash Pumps

    Submersible Trash Pumps are designed to pump water containing solids such as mud, weed, trash, sticks and other foreign materials that cannot be pumped with conventional centrifugal pumps. The semi-open intake design permits the inflow of water at varying rates and does not require any suction lines. As the inflow of water increases or decreases, ...

    By D&D Machine & Hydraulics, Inc. based in Fort Myers, FLORIDA (USA).

  • Model S4T-2 - 4" Hydraulic Submersible Trash Pump

    The S4T is our most versatile 4' pump. It is rugged, compact and able to pass large solids, this pump is designed to tackle many jobs ranging from general construction site de-watering to sewage and slurry pumps.

    By Hydra-Tech Pumps based in Nesquehoning, PENNSYLVANIA (USA). from Solids Handling Pumps Product line

  • Model SP 20 - Submersible Trash Pump with Hydraulic Motor

    SUBMERSIBLE TRASH PUMP WITH HYDRAULIC MOTOR SP 20 is a small and powerful trash pump with flow capacity up to 500 L/min and water heads up to 10 meters ( max water pressure 1 bar ) The tool can pump solid objects with dimension up to 3,5 cm ( 1-1/4” ) and pump also thick and muddy liquids with concentration of the solid in the fluid up to ...

    By Doa srl based in Novedrate, ITALY. from Water Pumps Product line

  • Model 2 - Hydraulic Submersible Trash Pump

    The S2T-2 is a Very Portable Vortex Impeller pump. This pump can handle stringy solids and can be used for jobs such as bilge pumping, jobsite dewatering, wastewater transfer, oil skimmers, vault pumping and grit chamber clean-outs.

    By Pow-R Mole Sales LLC based in Lancaster, NEW YORK (USA). from Water Pumps Product line

  • Wacker

    Wacker – Compaction Equipment (Rammers, vibroplates, walk behind & trench rollers), Air-cooled Generators, Pumps (submersible and trash type), Cut-off saws, Light Towers.

    By Coastline Equipment based in Long Beach, CALIFORNIA (USA).

  • DuraFlo - Model HTC004 - Submersible Hydraulic Trash Pump

    The DuraFlo hydraulic submersible trash pumps coupled with their diesel or electric drive units are an unbeatable combination for: drying out construction excavations, quarry dewatering, bypassing, sewage, and general municipal use an industrial work.These units are designed and manufactured for the toughest environments. They will run ...

    By MWI Corporation based in Deerfield Beach, FLORIDA (USA).

  • Griffin - DC Powered Pumps

    Griffin's Offers both dewatering pumps with Electric and Diesel Engines that are available in 4' to 24' models. These pumps are capable of handling flow from a few gallons per minute up to 20,000 gallons per minute. Griffin offers Electric Submersible Dewatering Pumps, Electric Driven Trash Pumps, and Electric Driven Wellpoint Pumps.Voltages ...

    By Griffin Dewatering Corporation based in Houston, TEXAS (USA). from Pump & Equipment Product line

  • Model S3T - 3" Hudraulic submersible vortex flow trash pump

    The S3T model is designed for jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12' opening and pump in debris laden areas. A small hole strainer is available for limiting solids to be pumped.

    By Hydra-Tech Pumps based in Nesquehoning, PENNSYLVANIA (USA). from Solids Handling Pumps Product line

  • Model S6T - 6" Hydraulic Submersible Vortex Flow trash Pump

    The S6T is our most popular 6' Pump. It is lightweight, compact and able to pass large solids, stringy materials and slurries with entrained gases. this versatile top discharge pump is designed for sewer by-pass jobs, digester cleaning, plant intake de-silting and inline pumping.

    By Hydra-Tech Pumps based in Nesquehoning, PENNSYLVANIA (USA). from Solids Handling Pumps Product line

  • Model S3T - Hydraulic Submersible Vortex Flow Trash Pump

    Our S3T model is designed for jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12' opening and pump in debris laden areas. A small hole strainer is available for limiting solids to be pumped.

    By Pow-R Mole Sales LLC based in Lancaster, NEW YORK (USA). from Water Pumps Product line

  • Croos - Model OHM Series - Submersible Water Pump With Mixer

    OHM series are Non-Clog Electric Submersible Pumps for Sludge, Sewage, Trash & Industrial Waste.

    By Croos Pump (Shanghai) Co., Ltd based in Minhang District, CHINA. from Submersible Pump Product line

  • HS Series

    Gorman-Rupp hydraulic submersible pumps are designed for trash-handling, dewatering applications and for pumping dirty liquids such as mining and paper plant wastes. They are also excellent for pumping sewage from digester and holding tanks as well as sewer bypass. Because they operate without using electricity, they are well suited for ...

    By Gorman-Rupp Co. based in Mansfield, OHIO (USA). from Submersible Pumps Product line

  • Griffin - Hydraulic Driven Submersible Pumps

    Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4” to 24” with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to ...

    By Griffin Dewatering Corporation based in Houston, TEXAS (USA). from Pump & Equipment Product line

  • Model CF 60 - Wastewater Treatment System

    The Model GF60 treatment system is constructed with a fiberglass tank, noncorrosive internal parts.. PVC schedule 40 and/or schedule 80 piping, stainless steel trash screening, two (2) submersible aeration pumps with venturi system, one (1) submersible transfer pump, one (1) RAS pump, two (2) submersible discharge pumps sized to meet total dynamic ...

    By CromaFlow Inc. based in Montoursville, PENNSYLVANIA (USA). from Wastewater Treatment Product line

  • Water, Stormwater, and Wastewater Pump

    Barnes (Sewage, sump, effluent and trash handling pumps. Submersible grinder, cutter and wastewater non-clog pumps). Cornell (Clean water and sewage — vertical, horizontal, close coupled or extended shaft high efficiency pumps. Immersible motors, submersible and dry pit pumps). Crown (Self priming pumps, split case pumps, end suction pumps, single ...

    By Weston & Sampson Engineers, Inc. based in Peabody, MASSACHUSETTS (USA). from Equipment Sales Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you